ACDC 5/10 Watts ECE Series xppower.com • Ultra Compact Size • Single Outputs from 3.3 to 48 V • Encapsulated PCB Mount • <0.3 W No Load Input Power • Peak Load Capability • No External Components Required • 3 Year Warranty Specification Input General • 85-264 VAC (120-370 VDC) derate load from 100% at 90 VAC to 90% at 85 VAC Input Frequency • 47-63 Hz Input Current • ECE05: 0.1 A rms at 230 VAC ECE10: 0.2 A rms at 230 VAC Inrush Current • 20 A at 115 VAC, 40 A at 230 VAC, cold start at 25 °C Power Factor • EN61000-3-2 Class A Earth Leakage Current • Class II construction no earth No Load Input Power • <0.3 W Input Protection • Internal T1 A/250 VAC fuse Input Voltage Output Output Voltage Initial Set Accuracy Minimum Load Start Up Delay Start Up Rise Time Hold Up Time • • • • • • Line Regulation Load Regulation Transient Response • • • Ripple & Noise • Overvoltage Protection Overload Protection Short Circuit Protection Temperature Coefficient • • • • See tables ±1% No minimum load required 2 s max 25 ms max 8 ms/40 ms typical at full load and 115/230 VAC ±0.5% max ±1% max 4% max deviation, recovery to within 1% in 500 µs for a 25% load change 3.3-5 V versions: 60 mV pk-pk, all other models 1% pk-pk max 20 MHz bandwidth 125-190%, 195-216% ECE10US03 125-190% Trip and restart (hiccup mode) 0.05%/°C Efficiency Isolation Switching Frequency Power Density MTBF • • • • See tables 4000 VAC Input to Output 130 kHz typical ECE05: 8.3 W/In3 ECE10: 11.1 W/In3 • >450 kHrs to MIL-HDBK-217F at 25 °C, GB Environmental Operating Temperature • -25 °C to +70 °C, derate linearly from 100% at +50 °C to 50% at +70 °C Cooling • Convection-cooled Operating Humidity • 95% RH, non-condensing Storage Temperature • -40 °C to +85 °C Operating Altitude • 3048 m, 10,000 ft Vibration • 2 g, 10 Hz to 500 Hz, 10 mins/cycle, 60 mins each cycle EMC & Safety Emissions Harmonic Currents ESD Immunity Radiated Immunity • • • • EFT/Burst Surge • • Conducted Immunity Magnetic Fields Dips & Interruptions • • • Safety Approvals • Notes * If output is connected to GND, please contact applications engineering for further information. EN55022, level B conducted & radiated* EN61000-3-2, EN61000-3-3 EN61000-4-2, level 3 Perf Criteria A EN61000-4-3, 10 V/m 80% mod Perf Criteria A EN61000-4-4, level 3 Perf Criteria A EN61000-4-5, installation Class 3, Perf Criteria A EN61000-4-6, 10 Vrms Perf Criteria A EN61000-4-8, 10 A/m Perf Criteria A EN61000-4-11, 30% for 10 ms, 60% for 100 ms, 100% for 5000 ms Perf Criteria A, B, B EN60950-1, UL60950-1, CSA22.2 No. 234 per cUL Output Power 5.0 5.0 5.0 5.0 5.0 5.0 5.0 8.6 10.0 10.0 10.0 10.0 10.0 10.0 Output Current Output Voltage W W W W W W W W W W W W W W 3.3 5.0 9.0 12.0 15.0 24.0 48.0 3.3 5.0 9.0 12.0 15.0 24.0 48.0 Nominal 1.51 A 1.00 A 0.55 A 0.41 A 0.33 A 0.21 A 0.10 A 2.60 A 2.00 A 1.11 A 0.83 A 0.66 A 0.41 A 0.21 A VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC Peak(1) 1.96 A 1.30 A 0.71 A 0.53 A 0.43 A 0.27 A 0.13 A 3.38 A 2.60 A 1.44 A 1.08 A 0.86 A 0.53 A 0.27 A Efficiency(3) Model Number(2) 74% 80% 82% 82% 84% 83% 85% 77% 80% 82% 83% 82% 83% 83% ECE05US03 ECE05US05 ECE05US09 ECE05US12 ECE05US15 ECE05US24 ECE05US48 ECE10US03 ECE10US05 ECE10US09 ECE10US12 ECE10US15 ECE10US24 ECE10US48 Notes 1. Peak load lasting <30 s with a maximum duty cycle of 10%, average output power not to exceed nominal power. 2. Add suffix-P to model number to denote open frame version. Available for OEM quantities. 3. Efficiencies measured at 100% load with 115 VAC input. Mechanical Details ECE05 1.00 (25.4) ECE10 1.00 (25.4) 0.60 (15.24) 0.817 (20.76) 0.10 (2.7) 0.75 (19.05) 0.10 (2.54) 2 0.2 (5.08) 0.6 (15.24) 1 3 Bottom View 1.00 (25.4) 0.85 (21.59) 4 0.15 (3.9) 1 3 5 See note. 4 0.072 (1.84) 0.1 (2.54) ECE05P 1.3 (33.02) 0.065 (1.65) 5 0.065 (1.65) 2 2 4 0.85 (21.59) 0.45 (11.43) 3 0.47 (12.0) max 0.04 (1.0) 0.04 (1.0) 0.50 (12.7) 1.4 (35.56) 0.817 (20.76) 0.84 (21.5) 0.61 (15.5) ø0.04 (ø1.0) 0.10 (2.54) ECE10P 1 0.15 (3.9) 0.2 (5.08) 4 0.94 (23.9) 0.07 (1.95) 0.94 (23.9) 1.3 (33.02) 0.40 (10.16) 2 0.123 (3.13) 1.5 (38.1) 0.02 (ø0.5) See note. 4 0.05 (1.27) Pin 1 2 3 4 5 3 0.50 (12.7) 0.93 (23.7) 0.75 (19.05) 4 1 Function ACN ACL NC -Vout +Vout 0.469 (11.9) max 0.059 (1.5) max 0.03 (0.8) ø0.07 (ø1.8) ø0.04 (ø1.0) 0.15 (3.8) 0.173 (4.4) Pin 1 2 3 4 Function ACN ACL -Vout +Vout Notes 1. All dimensions in inches (mm). 2. Weight: ECE05: 0.035 lbs (16 g) ECE05-P: 0.022 lbs (10 g) ECE10: 0.053 lbs (24 g) ECE10-P: 0.031 lbs (14 g) 3. Tolerances: x.xx = ± 0.02 (x.x = ± 0.5), x.xxx = ± 0.01 (x.xx = ± 0.25) 4. ECE05: The solder pads for pins 1 & 2 should have a maximum diameter of 1.3mm to ensure that the creepage requirements of IEC60950 are met. 12-Nov-13 ACDC ECE5/10 Models and Ratings