POWER AVD75 Series 75 Watts Data Sheet Total Power: 75 Watts Input Voltage: 36 - 75V # of Outputs: Single SPECIAL FEATURES 2:1 Wide input range Optimised for High density, small space applications Low ripple and noise Fixed switching frequency High efficiency High capacitive load capability Pre-bias start-up capability Basic insulation system Through hole or SMT termination Openframe structure with Baseplate option SAFETY UL, cUL: UL60950 TUV/CE: IEC/EN60950 Electrical Specifications Input Input range: 36 - 75 VDC Efficiency: 92% @ 3.3V; 84% @ 1.2V Output Voltage tolerance: +/-1.5% Line regulation: 0.2% Load regulation: Single output: 0.5%@3.3V; 0.25% @1.2V Noise/ripple: 3.3 Vo: 70mV 1.2Vo: 45mV Over voltage protection: Over temperature protection: Auto-restart Switching frequency: 1.2V: 270KHz, 3.3V: 250KHz Temperature coefficient: ±0.02 /°C Isolation I/O isolation: 1500 VDC min. Environmental Specifications Operating ambient temperature range: -40°C to +85 Storage temperature: -55°C to +125 Humidity: 5% to 95% (non-condensing) MTBF: 2 Million hours RoHS Compliant AVD75 Series Data Sheet Ordering Information Model number Input voltage Output voltage Power AVD75-48S3V3-6L 36 - 75Vin 3.3V @ 20A 66W AVD75-48S3V3P-6L 36 - 75Vin 3.3V @ 20A 66W AVD75-48S3V3B-6L 36 - 75Vin 3.3V @ 20A 66W AVD75-48S3V3PB-6L 36 - 75Vin 3.3V @ 20A 66W AVD75-48S1V2TL 36 - 75Vin 1.2V @ 25A 30W AVD75-48S1V2-6L 36 - 75Vin 1.2V @ 25A 30W AVD75-48S1V2B-6L 36 - 75Vin 1.2V @ 25A 30W Notes: - Standard version is negative enable - “-6” = 3.8mm pin length - “-T” = Surface mount, reel tape package - “ -S” = Surface mount, tray package - “-L” = Rohs6 compliance - “ -P” = Positive enable Mechanical Drawings Notes: 1. All specifications are subject to change without notice. Mechanical drawings are for reference only. 2. Warranty: 2 yr 3. Label and logo appearance may vary from what is shown on mechanical drawings. AVD75 Series Data Sheet Pin Assignments Pin # Function 1 +V in 2 Enable 3 -V in 4 -V out 5 - Sense 6 Trim 7 +Sense 8 +V out WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong +852 2176 3333 While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2014 Artesyn Embedded Technologies, Inc. www.artesyn.com For more information: www.artesyn.com/power For support: [email protected] AVD75 Series-DS Rev. 05.13.14