B40C800G thru B380C800G Vishay General Semiconductor Glass Passivated Single-Phase Bridge Rectifier FEATURES • Ideal for printed circuit boards • High case dielectric strength ~ + ~ ~ + − e4 • High surge current capability • Typical IR less than 0.1 µA ~ − • Solder dip 260 °C, 40 s Case Style WOG • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS General purpose use in ac-to-dc bridge full wave rectification for power supply, adapter, charger, lighting ballaster on consumers and home appliances applications. PRIMARY CHARACTERISTICS IF(AV) 0.9 A VRRM 65 V to 600 V IFSM 45 A IR 10 µA VF 1.0 V TJ max. 125 °C MECHANICAL DATA Case: WOG Epoxy meets UL 94V-0 flammability rating Terminals: Silver plated leads, solderable per J-STD-002 and JESD22-B102 E4 suffix for consumer grade Polarity: As marked on body MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) SYMBOL B40 C800G B80 C800G B125 C800G B250 C800G B380 C800G UNIT Maximum repetitive peak reverse voltage VRRM 65 125 200 400 600 V Maximum RMS input voltage R- and C-load VRMS 40 80 125 250 380 V PARAMETER Maximum average forward output current for free air operation at TA = 45 °C R- and L-load C-load Maximum non-repetitive peak voltage 0.9 0.8 IF(AV) A VRSM 100 200 350 600 1000 V Maximum DC blocking voltage VDC 65 125 200 400 600 V Maximum peak working voltage VRWM 90 180 300 600 900 Maximum repetitive peak forward surge current IFRM 10 Peak forward surge current single sine-wave on rated load V A IFSM 45 A Rating for fusing at TJ = 125 °C (t < 100 ms) I2t 10 A 2s Minimum series resistor C-load at VRMS = ± 10 % Rt 1.0 2.0 4.0 8.0 12 Ω CL 5000 2500 1000 500 200 µF + 50 % - 10 % Maximum load capacitance Operating junction temperature range Storage temperature range Document Number: 88534 Revision: 15-Apr-08 TJ - 40 to + 125 °C TSTG - 40 to + 150 °C For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 B40C800G thru B380C800G Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage drop per diode 0.9 A SYMBOL Maximum reverse current at rated repetitive peak voltage per diode B40 C800G B80 C800G B125 C800G B250 C800G B380 C800G UNIT VF 1.0 V IR 10 µA THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL B40 C800G B80 C800G B125 C800G RθJA RθJL Typical thermal resistance (1) B250 C800G B380 C800G 36 11 UNIT °C/W Note: (1) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. at 0.375" (9.5 mm) lead lengths with 0.22 x 0.22" (5.5 x 5.5 mm) copper pads ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE B380C800G-E4/51 1.12 51 100 Plastic bag RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 1.0 50 to 60 Hz Resistive or Inductive Load 0.8 0 - 10 µF 10 - 100 µF > 100 µF Capacitive Load 0.6 0.4 P.C.B. 0.375" (9.5 mm) 0.2 Copper Pads 0.22 x 0.22" (5.5 x 5.5 mm) 0 Bridge Output Full Wave Rectified Current Average (A) Bridge Output Full Wave Rectified Current Average (A) 1.0 50 to 60 Hz Resistive or Inductive Load 0.8 Capacitive Load 0 - 10 µF 10 - 100 µF > 100 µF 0.6 0.4 P.C.B. 0.375" (9.5 mm) 0.2 Copper Pads 0.22 x 0.22" (5.5 x 5.5 mm) 0 0 20 40 60 80 100 120 140 0 20 40 60 80 100 120 140 Ambient Temperature (°C) Ambient Temperature (°C) Figure 1. Derating Curves Output Rectified Current for B40C800G...B125C800G Figure 2. Derating Curves Output Rectified Current for B250C800G...B380C800G www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88534 Revision: 15-Apr-08 B40C800G thru B380C800G Vishay General Semiconductor 10 TJ = 25 °C 10 ms Single Sine-Wave Instantaneous Reverse Current (µA) Peak Forward Surge Current (A) 50 40 30 20 10 1.0 Cycle TJ = 100 °C 0.1 TJ = 25 °C 0.01 0 20 0 100 10 1 40 80 60 100 Number of Cycles at 50 Hz Percent of Rated Peak Reverse Voltage (%) Figure 3. Maximum Non-Repetitive Peak Forward Surge Current Per Diode Figure 5. Typical Reverse Characteristics Per Diode 100 100 TJ = 25 °C Pulse Width = 300 µs 1 % Duty Cycle Junction Capacitance (pF) Instantaneous Forward Surge Current (A) 1 10 1 0.1 0.01 0.4 0.6 0.8 1.0 1.2 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 1 0.1 1.4 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 4. Typical Forward Characteristics Per Diode Figure 6. Typical Junction Capacitance Per Diode PACKAGE OUTLINE DIMENSIONS in inches (millimeters) Case Style WOG 0.388 (9.86) 0.348 (8.84) 0.220 (5.6) 0.160 (4.1) 1.0 (25.4) MIN. 0.032 (0.81) 0.028 (0.71) 0.348 (8.84) 0.308 (7.82) 0.060 (1.52) 0.020 (0.51) 0.220 (5.6) 0.180 (4.6) 0.220 (5.6) 0.180 (4.6) Document Number: 88534 Revision: 15-Apr-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1