RoHS CC10 Ceramic Core Chip Inductors 0.115 Max (2.92) Inches Dimensions: (mm) 0.079 Max (2.03) 0.110 Max (2.79) 0.020±0.004 (0.51±0.10) 0.100 (2.54) 0.006 min. 0.15 min. 0.080±0.004 (2.03±0.10) Allied Part Number Inductance Tolerance Test (nh) (%) Freq. (MHz) Q Min. Test Freq. (MHz) SRF Min. (MHz) DCR Max. (Ω) Rated Current (mA) CC10-10NK-RC CC10-12NK-RC CC10-15NK-RC CC10-18NK-RC CC10-22NJ-RC CC10-27NJ-RC CC10-33NJ-RC CC10-39NJ-RC CC10-47NJ-RC CC10-56NJ-RC CC10-68NJ-RC CC10-82NJ-RC CC10-100NJ-RC CC10-120NJ-RC CC10-150NJ-RC CC10-180NJ-RC CC10-220NJ-RC CC10-270NJ-RC CC10-330NJ-RC CC10-390NJ-RC CC10-470NJ-RC CC10-560NJ-RC CC10-620NJ-RC CC10-680NJ-RC CC10-750NJ-RC CC10-820NJ-RC CC10-910NJ-RC CC10-1000NJ-RC CC10-1200NJ-RC CC10-1500NJ-RC 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 620 680 750 820 910 1000 1200 1500 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 50 50 50 50 50 50 50 50 50 50 50 50 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 7.9 7.9 50 50 50 50 55 55 60 60 65 65 65 60 60 60 45 45 45 45 45 45 45 45 45 45 45 45 35 35 35 28 500 500 500 350 350 350 350 350 350 350 350 350 350 350 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 4100 3300 2500 2500 2400 1600 1600 1500 1500 1300 1300 1000 1000 950 850 750 700 600 570 500 450 415 375 375 360 350 320 290 250 200 0.08 0.09 0.10 0.11 0.12 0.13 0.14 0.15 0.16 0.18 0.20 0.22 0.56 0.63 0.70 0.77 0.84 0.91 1.05 1.12 1.19 1.33 1.40 1.47 1.54 1.61 1.68 1.75 2.00 2.30 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 650 650 580 620 500 500 450 470 470 400 300 400 360 400 380 370 310 330 CC10-1800NJ-RC 1800 5 7.9 28 50 160 2.60 300 CC10-2200NJ-RC 2200 5 7.9 28 50 160 2.80 280 CC10-2700NJ-RC 2700 CC10-3300NJ-RC 3300 CC10-3900NJ-RC 3900 CC10-4700NJ-RC 4700 CC10-5600NJ-RC 5600 CC10-6800NJ-RC 6800 CC10-8200NJ-RC 8200 CC10-10000NJ-RC 10000 CC10-15000NJ-RC 15000 5 5 5 7.9 7.9 7.9 7.9 7.9 7.9 7.9 2.52 2.52 22 22 20 20 18 18 18 18 15 25 25 25 25 7.9 7.9 7.9 7.9 7.9 140 110 100 90 45 40 25 25 20 3.20 3.40 3.60 4.00 4.00 4.90 6.00 8.00 11.00 290 290 260 260 240 200 170 150 100 5 5 5 5 5 5 0.050 (1.27) 0.040 (1.02) Features • 1008 size suitable for pick and place automation • Low Profile under 2.03mm • Ceramic core provide high self resonant frequency. • High Q values at high frequencies • Ceramic core also provides excellent thermal and batch consistency Electrical Inductance Range: 10nH to 15,000nH Tolerance: 5% over entire range, except 10nH thru 18nH they are available in 10% Most values available in tighter tolerances Test Frequency: At specified frequency with Test OSC @ 200mV Operating Temp: -40ºC ~ 125ºC Irms: Based on 15ºC temperature rise @ 25º Ambient. Resistance to Soldering Heat Test Method: Reflow Solder the devide onto PCB Peak Temp: 260ºC ± 5ºC for 10 sec. Solder Composition: Sn/Ag3.0/Cu0.5 Total test time: 6 minutes Test Equipment (L/Q): HP4286A / HP4287A /Agilent E4991A (SRF): HP8753D / Agilent E4991 (RDC): Chen Hwa 502BC Irms: HP4284A + HP42841A / HP4285A + HP42841A Physical Packaging: 2000 pieces per 7 inch reel. Marking: Three Dot Color Code System Also available in 5% = J and 2% = G All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 7/1/10 www.alliedcomponents.com