2.5x0.7mm RIGHT ANGLE SMD CHIP LED LAMP Part Number: APFA2507QBDSEEZGKC ATTENTION Blue Hyper Red Green OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Descriptions z 2.5x1.0x0.7mm right angle SMD LED, 0.7mm thickness. z The Blue source color devices are made with InGaN on Sapphire Light Emitting Diode. z Low power consumption. z The Hyper Red source color devices are made with z Wide viewing angle. z Ideal for backlight and indicator. AlGaInP on GaAs substrate Light Emitting Diode. z The Green source color devices are made with InGaN z Package : 3000pcs / reel. z Moisture sensitivity level : level 3. z Tinned pads for improved solderability. on Sapphire Light Emitting Diode. z Electrostatic discharge and power surge could damage the LEDs. z RoHS compliant. z It is recommended to use a wrist band or antielectrostatic glove when handling the LEDs. z All devices, equipments and machineries must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAO0362 REV NO: V.2B DATE: JUN/27/2015 PAGE: 1 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: F.T.Liu ERP: 1203014712 Selection Guide Part No. Emitting Color (Material) Min. Typ. 2θ1/2 40 65 140° 80 110 110° 200 400 130° Blue (InGaN) APFA2507QBDSEEZGKC Water Clear Hyper Red (AlGaInP) Viewing Angle [1] Iv (mcd) [2] @ 20mA Lens Type Green (InGaN) Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Emitting Color Typ. λpeak Peak Wavelength Blue Hyper Red Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 460 630 515 nm IF=20mA Blue Hyper Red Green 465 621 525 nm IF=20mA Spectral Line Half-width Blue Hyper Red Green 25 20 35 nm IF=20mA C Capacitance Blue Hyper Red Green 100 25 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue Hyper Red Green 3.3 2 3.3 4 2.5 4.1 V IF=20mA IR Reverse Current Blue Hyper Red Green 50 10 50 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2.Forward Voltage: +/-0.1V. 3.Wavelength value is traceable to the CIE127-2007 compliant national standards. 4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25°C Parameter Blue Hyper Red Green Units Power dissipation 120 75 102.5 mW DC Forward Current 30 30 25 mA Peak Forward Current [1] 150 195 150 mA Electrostatic Discharge Threshold (HBM) 250 - 450 V Reverse Voltage 5 Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C V Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAO0362 REV NO: V.2B DATE: JUN/27/2015 PAGE: 2 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: F.T.Liu ERP: 1203014712 APFA2507QBDSEEZGKC Blue SPEC NO: DSAO0362 REV NO: V.2B DATE: JUN/27/2015 PAGE: 3 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: F.T.Liu ERP: 1203014712 Hyper Red SPEC NO: DSAO0362 REV NO: V.2B DATE: JUN/27/2015 PAGE: 4 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: F.T.Liu ERP: 1203014712 Green SPEC NO: DSAO0362 REV NO: V.2B DATE: JUN/27/2015 PAGE: 5 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: F.T.Liu ERP: 1203014712 APFA2507QBDSEEZGKC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAO0362 REV NO: V.2B DATE: JUN/27/2015 PAGE: 6 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: F.T.Liu ERP: 1203014712 PACKING & LABEL SPECIFICATIONS APFA2507QBDSEEZGKC Terms and conditions for the usage of this document 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAO0362 REV NO: V.2B DATE: JUN/27/2015 PAGE: 7 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: F.T.Liu ERP: 1203014712