Proven Reliabilit y A SERIES ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS 100V to 6000V @ 1.0 and 1.5 Watts Extremely Low Profile: 0.25 inches and volume of < 0.100 cubic inches PRODUCT SELECTION TABLE *5 VDC UL NOW IZED N G O REC PRODUCT DESCRIPTION The A Series is a new line of ultra-miniature, DC to HV DC converters that set an industry standard in high voltage miniaturization. This unique package occupies less than one tenth of a cubic inch of volume*5, and features an extremely low profile of only 0.250 inches (6.35mm)! Controllable output voltages range from 100 volts to 6000 volts. These component-sized converters are ideal for applications requiring minimal size and weight. Please refer to our AG series data sheet for surface mount options. 1.5 WATT OPTION AH MODEL STANDARD 1 WATT A MODEL MODEL MAXIMUM OUTPUT CURRENT*1 MODEL MAXIMUM OUTPUT CURRENT*1 100 VDC A01 10 mA AH01 15 mA 200 VDC A02 5 mA AH02 7.5 mA 250 VDC A025 4 mA AH025 6 mA 300 VDC A03 3.33 mA AH03 5mA 400 VDC A04 2.5 mA AH04 3.75 mA 500 VDC A05 2 mA AH05 3 mA 600 VDC A06 1.67 mA AH06 2.5 mA 700 VDC A07 1.43 mA AH07 2.15 mA 800 VDC A08 1.25 mA AH08 1.87 mA 900 VDC A09 1.1 mA AH09 1.67 mA 1000 VDC A10 1 mA AH10 1.5 mA 1200 VDC A12 0.83 mA AH12 1.25 mA 1500 VDC A15 0.66 mA AH15 1 mA 2000 VDC A20 0.5 mA AH20 0.75 mA 3000 VDC A30 0.32 mA AH30 0.5 mA 4000 VDC A40 0.24 mA – – 5000 VDC A50 0.2 mA – – 6000 VDC A60 0.167 mA AH60 0.25 mA Complete List of Models on page 2 APPLICATIONS Avalanche Photodiodes Capacitor Charging Electrophoresis Photomultiplier Tubes Piezo Devices Mass Spectrometry Sustaining Ion Pumps OPTIONS 1 Watt and 1.5 Watt Versions Available (A/AH) Three Input Voltage Ranges: 0 to 5, 12, or 24VDC (5V only above 3KV) Polarity: Choose Positive or Negative Output (P/N) Extended Operating Temperature (A Models / 1.0W) (T Suffix) Alternate Input / Output Voltages (Consult Factory) See Ordering Information (Page 11) WWW.XPPOWER.COM FEATURES • • • • • • • • • • • • Proportional Input/Output Low Noise Quasi-sinewave Oscillator Control Pin Low Leakage Current Low Input/Output Capacitance Input to Output Galvanic Isolation Short Circuit Protection, 1 Minute Minimum No Minimum Load Required*2 MTBF > 1,862,000 hours, per Bellcore TR 332 No External Components Required RoHS Compliant UL Recognized E344664 4389U04 PAGE 1 A SERIES ELECTRICAL SPECIFICATIONS*3 STANDARD 1 WATT - A MODEL OUTPUT VOLTAGE* 2 1.5 WATT OPTION - AH MODEL (To select polarity, see pg. 10 - How to Order) MODEL MAXIMUM OUTPUT CURRENT*1 RIPPLE P-P*4 MODEL MAXIMUM OUTPUT CURRENT*1 RIPPLE P-P*4 0 to 100 VDC A01 10 mA 5% AH01 15 mA 2% 0 to 200 VDC A02 5 mA 1% AH02 7.5 mA 3% 0 to 250 VDC A025 4 mA .90% AH025 6 mA 1.2% 0 to 300 VDC A03 3.33 mA .70% AH03 5 mA .70% 0 to 400 VDC A04 2.5mA .50% AH04 3.75 mA .75% 0 to 500 VDC A05 2 mA .50% AH05 3 mA .70% 0 to 600 VDC A06 1.67 mA 1% AH06 2.5 mA 2% 0 to 700 VDC A07 1.43 mA .50% AH07 2.15 mA 1.2% 0 to 800 VDC A08 1.25 mA 1% AH08 1.87 mA 1.2% 0 to 900 VDC A09 1.1 mA 1% AH09 1.67 mA 1.2% 0 to 1000 VDC A10 1 mA .79% AH10 1.5 mA 1% 0 to 1200 VDC A12 0.83 mA .50% AH12 1.25 mA .60% 0 to 1500 VDC A15 0.67 mA .40% AH15 1 mA .60% 0 to 2000 VDC A20 0.5 mA .30% AH20 0.75 mA .50% 0 to 3000 VDC A30 0.33 mA .20% AH30 0.5 mA .20% 0 to 4000 VDC A40 0.25 mA .12% – – – 0 to 5000 VDC A50 0.2 mA .15% – – – 0 to 6000 VDC A60 0.167 mA .15% AH60 0.25 mA .25% INPUT CURRENT A MODELS – 1 Watt AH MODELS – 1.5 Watt VIN NO-LOAD FULL-LOAD NO-LOAD FULL-LOAD 5 VDC <300mA <500mA <300mA <550mA 12 VDC <100mA <185mA <125mA <250mA 24 VDC <25mA <60mA <40mA <120mA 0 TO 5V ONLY (FOR MODELS OVER 3kV) WWW.XPPOWER.COM 4389U04 PAGE 2 A SERIES ELECTRICAL SPECIFICATIONS*3 PARAMETER VALUE 0 TO 5, 12, OR 24V (FOR MODELS UP TO 3KV) INPUT VOLTAGE 0 TO 5V (FOR MODELS OVER 3KV) TURN-ON VOLTAGE <0.7 VDC ISOLATION < +/- 500V BIAS ON PIN 4 OUTPUT VOLTAGE TOLERANCE +10%, -10% FULL LOAD, MAX. INPUT VOLTAGE INPUT/OUTPUT COUPLING CAPACITANCE <250 pf TYPICAL INPUT/OUTPUT LEAKAGE CURRENT <100 nA TYPICAL CONTROL PIN 0 to MAX. INPUT VOLTAGE INTERNAL OSCILLATOR FREQUENCY 50kHz - 350kHz OPERATING: -25° TO +75°C*6 (CASE) STANDARD TEMPERATURE RANGES STORAGE: -55° TO +105°C EXTENDED TEMPERATURE RANGES (-T OPTION) OPERATING: -55 TO +85°C*6 (CASE) [A Models / 1.0W] STORAGE: -55° TO +105°C DETAILED PRODUCT DESCRIPTION The A Series is a new line of ultra-miniature, DC to HV DC converters that set an industry standard in high voltage miniaturization. This unique package occupies less than one tenth of a cubic inch of volume*5, and features an extremely low profile of only 0.250 inches (6.35mm)! Controllable output voltages range from 100 volts to 6000 volts. These component-sized converters are ideal for applications requiring minimal size and weight. Output power is 1 watt standard, with 1.5 watts available as an option. No minimum load is required. A proprietary vacuum encapsulation process and custom 94V-0 listed, high performance formula are used to achieve excellent high voltage and thermal properties. Isolation is +/- 500V bias on the output return. Input to output leakage current is very low at less than 100 nA and coupling capacitance is also low at <250 pF. Turn-on voltage is very low at less than 0.7 volts, allowing for wide output voltage operating range. Use of a resonant, quasi-sinewave oscillator and fully shielded transformer result in clean, reliable high voltage conversion with inherently low ripple, EMI/RFI and input ripple current, making this product ideal for integration into noise sensitive equipment. The new A Series leverages XP EMCO’s Best-in-Class long term reliability, utilizing proven DC to high voltage DC conversion technology, perfected by over four decades of high voltage design experience in the most demanding applications. Our extensive in-house capabilities enable us to meet specific customer requirements with standard, modified and custom solutions quickly, easily, and economically. Technical assistance is readily available. A separate high impedance control pin is standard and is designed for external error amplifier and/or DAC control in closed or open loop systems. Or simply connect the control pin to the + input for proportional input to output operation (see schematic and performance charts below). WWW.XPPOWER.COM 4389U04 PAGE 3 A and AH SERIES MECHANICAL SPECIFICATIONS (100V - 2,000V) TOP VIEW SIDE VIEW DIMENSIONS ARE IN INCHES (METRIC EQUIVALENTS ARE IN PARENTHESIS) DIMENSIONAL TOLERANCES: .XX = +- 0.02 (0.51), .XXX = +- 0.005 ( 0.127) PARAMETER VALUE PIN # FUNCTION WEIGHT < 0.20 OZ. (5.66 GRAMS) 1 (–) INPUT VOLUME < 0.10 CUBIC INCHES (1.696 CUBIC CENTIMETERS) 2 (+) INPUT DIMENSIONS 0.92L (23.37L) x 0.45W (11.43W) x 0.25H (6.35H) 3 HV OUT 4 HV RTN 5 CONTROL WWW.XPPOWER.COM 4389U04 PAGE 4 A and AH SERIES MECHANICAL SPECIFICATIONS (3,000V - 5,000V) TOP VIEW SIDE VIEW DIMENSIONS ARE IN INCHES (METRIC EQUIVALENTS ARE IN PARENTHESIS) DIMENSIONAL TOLERANCES: .XX = +- 0.02 (0.51), .XXX = +- 0.005 ( 0.127) PARAMETER VALUE PIN # FUNCTION WEIGHT < 0.25OZ (7.09 GRAMS) 1 (–) INPUT VOLUME < 0.12 CUBIC INCHES (2.082 CUBIC CENTIMETERS) 2 (+) INPUT DIMENSIONS 1.129L (28.69L) x 0.45W (11.43W) x 0.25H (6.35H) 3 HV OUT 4 HV RTN 5 CONTROL WWW.XPPOWER.COM 4389U04 PAGE 5 A and AH SERIES MECHANICAL SPECIFICATIONS (6,000V) TOP VIEW SIDE VIEW DIMENSIONS ARE IN INCHES (METRIC EQUIVALENTS ARE IN PARENTHESIS) DIMENSIONAL TOLERANCES: .XX = +- 0.02 (0.51), .XXX = +- 0.005 ( 0.127) PARAMETER VALUE PIN # FUNCTION WEIGHT < 0.30 OZ. (8.49 GRAMS) 1 (–) INPUT VOLUME < 0.15 CUBIC INCHES (2.45 CUBIC CENTIMETERS) 2 (+) INPUT DIMENSIONS 1.33L (33.78L) x 0.45W (11.43W) x 0.25H (6.35H) 3 HV OUT 4 HV RTN 5 CONTROL WWW.XPPOWER.COM 4389U04 PAGE 6 A SERIES MECHANICAL SPECIFICATIONS 100V - 2,000V need updated drawing NOTE: No traces to be routed within the shaded area on the component side of the PWB. DIMENSIONS ARE IN INCHES (METRIC EQUIVALENTS ARE IN PARENTHESIS) DIMENSIONAL TOLERANCES: .XX = +- 0.02 (0.51), .XXX = +- 0.005 ( 0.127) 3,000 - 5,000V NOTE: No traces to be routed within the shaded area on the component side of the PWB. DIMENSIONS ARE IN INCHES (METRIC EQUIVALENTS ARE IN PARENTHESIS) DIMENSIONAL TOLERANCES: .XX = +- 0.02 (0.51), .XXX = +- 0.005 ( 0.127) WWW.XPPOWER.COM 4389U04 PAGE 7 A SERIES MECHANICAL SPECIFICATIONS 6,000V DIMENSIONS ARE IN INCHES (METRIC EQUIVALENTS ARE IN PARENTHESIS) DIMENSIONAL TOLERANCES: .XX = +- 0.02 (0.51), .XXX = +- 0.005 ( 0.127) WWW.XPPOWER.COM 4389U04 PAGE 8 A SERIES APPLICATION NOTES Typical HV Output vs. Control Voltage Typical HV Output vs. Control Voltage 300 Full Load Output No Load Output (A) No Load Output (AH) Safe Operating Limit 250 % HV Output 200 150 100 50 0 0 10 20 30 40 50 60 70 80 90 100 % Control Voltage NOTE: Vin held at maximum TYPICAL INPUT vs. OUTPUT VOLTAGE Typical Input vs. Output Voltage 100 loaded unloaded (A) 90 unloaded (AH) 80 % OUTPUT VOLTAGE 70 60 50 40 30 20 10 0 0 10 20 30 40 50 60 70 80 90 100 % INPUT VOLTAGE NOTE: Control Pin tied to Vin Pin Output Voltage is load dependent. Under light or no-load conditions, reduce the Input Voltage so maximum rated Output Voltage is not exceeded. WWW.XPPOWER.COM 4389U04 PAGE 9 A SERIES OPTION CODES ORDERING INFORMATION OUTPUT VOLTAGE POLARITY DESIGNATOR INPUT VOLTAGE STANDARD TEMPERATURE RANGES EXTENDED TEMPERATURE RANGES ORDER CODE 1 WATT A 1.5 WATT AH POSITIVE OUTPUT P NEGATIVE OUTPUT N 5 VDC 5 12 VDC 12 24 VDC 24 OPERATING: -25 TO +75°C*6 (CASE) BLANK STORAGE: -55 TO +105°C BLANK OPERATING: -55 TO +85°C*6 (CASE) [A Models / 1.0W] T STORAGE: -55 TO +105°C T HOW TO ORDER PART NUMBER SELECTOR: Model Number: A 20 N - 12 T A - Model 20 - Output Voltage/100 (See table) N - Polarity Designator T - Extended Operating Temperature 12 - Input Voltage EXAMPLE: A20N-12T (A - Model, 20 - Output Voltage, N - Negative, 12 - Input Voltage, T - Extended Operating Temperature) *Note: 1. At maximum rated output voltage 2. Output Voltage is load dependent. Under light or no-load conditions, reduce the Input Voltage so maximum rated Output Voltage is not exceeded. 3. Specifications after 30 minute warm-up, full-load, at 25ºC, unless otherwise noted. 4. Ripple may be reduced substantially by the addition of an external RC filter. 5. Volume will vary depending on package size. 6. Proper thermal management techniques are required to maintain safe case temperature at maximum power output. XP EMCO reserves the right to make changes on products and literature, including specifications, without notice. XP EMCO standard product models are not recommended for “copy-exact” applications or any other application restricting product changes. “Copy-exact” options are available. Please contact an XP EMCO sales representative for more details. WWW.XPPOWER.COM 4389U04 PAGE 10