3.0x2.0mm SURFACE MOUNT LED LAMP Part Number: AA3020AVGC/Z PRELIMINARY SPEC Green ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 3.0MM X 2.0MM, 1.4MM HIGH, ONLY MINIMUM The Green source color devices are made with InGaN Light SPACE REQUIRED. Emitting Diode. z SUITABLE FOR COMPACT OPTOELECTRONIC Static electricity and surge damage the LEDS. APPLICATIONS. It is recommended to use a wrist band or anti-electrostatic z LOW POWER CONSUMPTION. glove when handling the LEDs. z PACKAGE : 2000PCS / REEL. All devices, equipment and machinery must be electrically z MOISTURE SENSITIVITY LEVEL : LEVEL 4. grounded. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH4220 REV NO: V.3 DATE: JUN/27/2007 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1201002895 Selection Guide Part No. Dice AA3020AVGC/Z Lens Type Green (InGaN) WATER CLEAR Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 2θ1/2 650 1000 90° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 525 nm IF=20mA Green 535 nm IF=20mA Spectral Line Half-width Green 39 nm IF=20mA C Capacitance Green 65 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 3.2 3.7 V IF=20mA IR Reverse Current Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 111 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH4220 REV NO: V.3 DATE: JUN/27/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1201002895 Green AA3020AVGC/Z SPEC NO: DSAH4220 REV NO: V.3 DATE: JUN/27/2007 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1201002895 AA3020AVGC/Z Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH4220 REV NO: V.3 DATE: JUN/27/2007 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1201002895 PACKING & LABEL SPECIFICATIONS AA3020AVGC/Z SPEC NO: DSAH4220 REV NO: V.3 DATE: JUN/27/2007 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1201002895