Panasonic AQY221N3M Micro-miniature son package lower output capacitance and on resistance (cã r5) 25v load voltage Datasheet

PhotoMOS.book Page 155 Thursday, March 26, 2009 2:21 PM
RF SON 1 Form A C×R5 (AQY221N3M)
Micro-miniature SON package
Lower output capacitance
and on resistance (C×R5)
25V load voltage
RF SON 1 Form A C×R5
(AQY221N3M)
FEATURES
New
2.95
.116
2.20
.087
1.40
.055
mm inch
1
4
2
3
1. Super miniature SON* package
contributes to space savings and high
density mounting.
The SON type is a new PhotoMOS relay
with approximately 43% the volume ratio
of existing SSOP type. The super
miniature leadless construction reduces
the mounting area and enables high
density mounting.
2. Lower output capacitance and onresistance
Output capacitance (Cout): 1.1pF (typ.)
On resistance (Ron): 5.5Ω (typ.)
3. High speed switching
Turn on time: 0.02ms (typ.)
Turn off time: 0.02ms (typ.)
*Small Outline No-lead package
Reduced to approximately 43%
volume ratio
TYPICAL APPLICATIONS
Measuring and testing equipment
1. Testing equipment
IC tester, Semiconductor performance
tester, Probe cards, etc.
2. Board tester
Bare board tester, In-circuit tester,
Function tester, etc.
Previous SSOP package
(L: 2.65 × W: 4.45 × H: 1.80)
(L: .104 × W: .175 × H: .071)
Compliance with RoHS Directive
H: 1.4 .055
New SON package
L: 2.2
.087
W: 2.95
.116
Area comparison (including leads)
Previous
SOP4pin
100%
Previous
SSOP
SON
44%
22%
Flat lead
Leadless
TYPES
Output rating*1
AC/DC dual use
Load voltage
25 V
Load current
150 mA
Package
SON
Tape and reel packing style*2
Picked from the 1 and 4-pin side
AQY221N3MY
Picked from the 2 and 3-pin side
AQY221N3MW
Packing quantity
in tape and reel
3,500 pcs.
Notes: *1 Indicate the peak AC and DC values.
*2 Only tape and reel package is available.
For space reasons, only “1N3” is marked on the product as the part number.
RATING
1. Absolute maximum ratings (Ambient temperature: 25°C 77°F)
Item
LED forward current
LED reverse voltage
Input
Peak forward current
Power dissipation
Load voltage (peak AC)
Output
Continuous load current
Power dissipation
Total power dissipation
I/O isolation voltage
Operating temperature
Storage temperature
Symbol
IF
VR
IFP
Pin
VL
IL
Pout
PT
Viso
Topr
Tstg
AQY221N3M
50mA
5V
1A
75mW
25V
0.15A
250mW
300mW
200V AC
–40°C to +85°C –40°F to +185°F
–40°C to +100°C –40°F to +212°F
Remarks
f=100 Hz, Duty factor=0.1%
Peak AC, DC
Non-condensing at low temperatures
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
PhotoMOS.book Page 156 Thursday, March 26, 2009 2:21 PM
RF SON 1 Form A C×R5 (AQY221N3M)
2. Electrical characteristics (Ambient temperature: 25°C 77°F)
Item
Symbol
Typical
Maximum
Minimum
Typical
Typical
Maximum
LED operate current
Input
LED turn off current
LED dropout voltage
AQY221N3M
1.0 mA
3.0 mA
0.2 mA
0.9 mA
1.35 V (1.14 V at IF = 5 mA)
1.5 V
IFon
IFoff
VF
Ron
IL = 80 mA
IF = 50 mA
IF = 5 mA
IL = 80 mA
Within 1 s on time
IF = 0 mA
VB = 0 V
f = 1 MHz
7.5Ω
Maximum
1.1 pF
Typical
Output capacitance
Cout
Maximum
1.5 pF
Typical
Off state leakage current
0.01 nA
ILeak
Maximum
IF = 0 mA
VL = Max.
10 nA
IF = 5 mA
VL = 10 V
RL = 125Ω
IF = 5 mA
VL = 10 V
RL = 125Ω
0.02 ms
Typical
Turn on time*
Transfer
characteristics
IL = 80 mA
5.5Ω
Typical
On resistance
Output
Condition
Ton
Maximum
0.2 ms
Typical
0.02 ms
Turn off time*
Toff
Maximum
0.2 ms
Typical
I/O capacitance
0.8 pF
Ciso
Maximum
f = 1 MHz
VB = 0 V
1.5 pF
Note: Variation possible through combinations of output capacitance and on resistance. For more information, please contact our sales office in your area.
*Turn on/Turn off time
Input
90%
10%
Output
Toff
Ton
RECOMMENDED OPERATING CONDITIONS
Please obey the following conditions to ensure proper relay operation and resetting.
Item
Input LED current
Symbol
IF
Recommended value
5
Unit
mA
■ For Dimensions
■ For Schematic and Wiring Diagrams
■ For Cautions for Use
■ These products are not designed for automotive use.
If you are considering to use these products for automotive applications, please contact your local Panasonic Electric
Works technical representative.
For more information
REFERENCE DATA
1. Load current vs. ambient temperature
characteristics
2. Load current vs. Load voltage characteristics
Ambient temperature: 25°C 77°F
Allowable ambient temperature: –40°C to +85°C
–40°F to +185°F
Measured portion: between terminals 3 and 4
LED current: 5 mA; Load voltage: 10V (DC);
Load current: 80mA (DC)
10
150
100
50
On resistance, Ω
200
Load current, mA
Load current, mA
200
0
-40
3. On resistance vs. ambient temperature
characteristics
150
100
50
-20
0
20
40
60
80 85 100
Ambient temperature, °C
0
8
6
4
2
0
5
10
15
20
25
Load voltage, V
30
0
-40
-20
0
20
40
60
80 85
Ambient temperature, °C
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
PhotoMOS.book Page 157 Thursday, March 26, 2009 2:21 PM
RF SON 1 Form A C×R5 (AQY221N3M)
5. Turn off time vs. ambient temperature
characteristics
6. LED operate current vs. ambient
temperature characteristics
Measured portion: between terminals 3 and 4
LED current: 5 mA; Load voltage: 10V (DC);
Continuous load current: 80mA (DC)
Measured portion: between terminals 3 and 4
LED current: 5 mA; Load voltage: 10V (DC);
Continuous load current: 80mA (DC)
Measured portion: between terminals 3 and 4
Load voltage: 10V (DC);
Continuous load current: 80mA (DC)
0.1
0.08
0.08
0.06
0.04
0.02
5
LED operate current, mA
0.1
Turn off time, ms
Turn on time, ms
4. Turn on time vs. ambient temperature
characteristics
0.06
0.04
-40
-20
0
0
20
40
60
80 85
Ambient temperature, °C
3
2
1
0.02
0
4
-40
-20
0
0
20
40
60
80 85
Ambient temperature, °C
-40
-20
0
20
40
60
80 85
Ambient temperature, °C
7. LED turn off current vs. ambient temperature
characteristics
8. LED dropout voltage vs. ambient
temperature characteristics
9. Current vs. voltage characteristics of output
at MOS portion
Measured portion: between terminals 3 and 4
Load voltage: 10V (DC);
Continuous load current: 80mA (DC)
LED current: 5 to 50 mA
Measured portion: between terminals 3 and 4
Ambient temperature: 25°C 77°F
3
2
1.4
1.3
50mA
1.2
30mA
20mA
1.1
10mA
Load current, mA
4
Current, mA
1.5
LED dropout voltage, V
LED operate current, mA
5
150
100
50
-2
-1.5
-1
-0.5
0.5
1 1.5
Voltage, V
2
-50
5mA
1
1
0
-40
-20
-100
0.9
0
20
40
60
80 85
Ambient temperature, °C
-40
-20
-150
0
20
40
60
80 85
Ambient temperature, °C
Voltage, V
10. Off state leakage current vs. load voltage
characteristics
11. Turn on time vs. LED forward current
characteristics
12. Turn off time vs. LED forward current
characteristics
Measured portion: between terminals 3 and 4
Ambient temperature: 25°C 77°F
Measured portion: between terminals 3 and 4
Load voltage: 10V (DC); Continuous load current:
80mA (DC); Ambient temperature: 25°C 77°F
Measured portion: between terminals 3 and 4
Load voltage: 10V (DC); Continuous load current:
80mA (DC); Ambient temperature: 25°C 77°F
0.1
0.5
0.08
0.4
10-5
10-7
10-9
0.06
0.04
0
5
10
15
20
25
Load voltage, V
0
30
0.3
0.2
0.1
0.02
10-11
10-13
Turn off time, ms
Turn on time, ms
Leakage current, A
10-3
0
10
20
30
40
50
LED forward current, mA
0
60
0
10
20
30
40
50
LED forward current, mA
60
14. Isolation vs. frequency characteristics
(50Ω impedance)
15. Insertion loss vs. frequency characteristics
(50Ω impedance)
Measured portion: between terminals 3 and 4
Frequency: 1 MHz, 30m Vrms; Ambient temperature:
25°C 77°F
Measured portion: between terminals 3 and 4
Ambient temperature: 25°C 77°F
Measured portion: between terminals 3 and 4
Ambient temperature: 25°C 77°F
100
2
80
1.5
2
Insertion loss, dB
2.5
Isolation, dB
Output capacitance, pF
13. Output capacitance vs. applied voltage
characteristics
60
1
40
0.5
20
1.5
1
0.5
0
0
5
10
15
20
25
Applied voltage, V
30
0 5
10
106
107
Frequency, Hz
108
0 4
10
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
105
106
Frequency, Hz
107
PhotoMOS.book Page 158 Thursday, March 26, 2009 2:21 PM
RF SON 1 Form A C×R5 (AQY221N3M)
16. On resistance distribution
17. Turn on time distribution
18. Turn off time distribution
Measured portion: between terminals 3 and 4
Continuous load current: 80mA (DC), n: 50pcs.
Ambient temperature: 25°C 77°F
Load voltage: 10V (DC)
Continuous load current: 80mA (DC), n: 50pcs.
Ambient temperature: 25°C 77°F
Load voltage: 10V (DC)
Continuous load current: 80mA (DC), n: 50pcs.
Ambient temperature: 25°C 77°F
40
50
50
40
40
Quantity, n
Quantity, n
30
25
20
15
Quantity, n
35
30
30
20
20
10
10
10
5
0
2
3
4
5
6
7
On resistance, Ω
0
8
0
0.02
0.04
0.06
0.08
Turn on time, ms
0.1
0
0
0.02
19. LED operate current distribution
Load voltage: 10V (DC)
Continuous load current: 80mA (DC), n: 50pcs.
Ambient temperature: 25°C 77°F
30
Quantity, n
25
20
15
10
5
0
0.4
0.6
0.8
1
1.2 1.4 1.6
LED operate current, mA
1.8
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
0.04
0.06
0.08
Turn on time, ms
0.1
Similar pages