AEC FCNA3710AW Float control Datasheet

Float Controls
sealed mechanical switch - narrow angle
Custom designed float switch for liquid
level control. Designed for use with liquid
level warning alarms, pilot duty control of
simplex or duplex systems, sump pumps
or any type of high/low operation. Available with standard power cords or custom
cords with quick-connect plugs, these
floats can serve as original equipment
components, retrofit, or as replacement
parts.
Tested to a water depth of 60 feet.
UL and CSA Recognized
U.L. # E87187
C.S.A. # LR64966
Ordering Codes
F
1
2
3
Float Color
4
5
6
7
8
Cord Termination
Code 1
9
Cord Length
Code 4
Code 6
Code 7
C
Gray
1
120VAC Series Tap Plug*
1
0
10 feet
F
Yellow
3
Plain Cut
2
0
20 feet
A
Custom
3
0
30 feet
A
A
Custom length
G
Black
M
Blue
D
Red
H
Green
Cord Type
Code 5
7
SJTO 16/2
8
SJTO 16/3
Mechanical Switch
Code 2
Code 3
Special Options
Operating angle & Switch Description
N
A
44.5°
13A, 1/2 HP, SPST-NO (Normally Open)
N
B
44.5°
13A, 1/2 HP, SPST-NC (Normally Closed)
N
C
44.5°
13A, 1/2 HP, SPDT (Changeover)
Code 8
Code 9
A
W
includes Weight Kit 4438
Note: * = UL Listed. Only available with 10ft cable (Cord length Code 10)
Example: FCNA3710AW
Gray Float, SPST-NO mechanical switch, plain cut cord termination, SJTO 16/2 cord type, cord length 10 feet with weight kit.
Not all part number combinations are active. Set up charges may apply. Please contact factory for availability.
Contact factory for custom requirements or specific application information
American Electronic Components Inc., 1101 Lafayette Street, Elkhart, Indiana IN46516
Page 1 of 2
www.aecsensors.com
Ref: FSME NARROW 111513JHM
Sales Department Tel: (888) 847-6552
Float Controls
sealed mechanical switch - narrow angle
Typical Application
The inches of water pumped
is determined by float tether
length and location.
Narrow Angle 44.5°, approximate operating angle
Tether length, inches (x)
Water pumped, inches (y)
3
4
6
8
3.5
4.5
5.5
6
Make Angle (approximate)
39°
Break Angle (approximate)
5.5°
Float switches are for use with motor-operated water pumps only, not for swimming pool use.
Recommended operating temperature range is 32°F to 160°F (0°C to 71°C)
Specifications are subject to change without notice. E&OE.
American Electronic Components Inc., 1101 Lafayette Street, Elkhart, Indiana IN46516
Page 2 of 2
www.aecsensors.com
Ref: FSME NARROW 111513JHM
Sales Department Tel: (888) 847-6552
Similar pages