Bourns CR2010-JX-8252ELF Chip resistor Datasheet

IA
NT
Features
CO
M
PL
■
*R
oH
S
■
■
■
RoHS compliant*
Power rating at 70 °C: CR2010 - 1/2 W,
CR2512 - 1 W
Tight tolerances of bottom electrode
width
Three layer termination process with
nickel barrier prevents leaching and
provides excellent solderability
■
■
Suitable for most types of soldering
processes
Standard packaging on tape and reel
CR2010/CR2512 - Chip Resistors
Electrical Characteristics
Characteristic
Power Rating @ 70 °C
Model
CR2010
Model
CR2512
1/2 W
1W
Operating Temperature Range
-55 °C to +155 °C
Derated to 0 Load at
+155 °C
Maximum Working Voltage
200 V
Maximum Overload Voltage
400 V
Resistance Range:
1 %, E-96 + E-24
5 %, E-24
Rated power in percentage (%)
Derating Curve
100
80
60
40
20
0
-55
0
155
70
(°C) Ambient temperature
10 ohms to 1 megohm
1 ohm to 10 megohms
0 ohm Jumper <50 milliohms
Temperature Coefficient:
1 % Tolerance
5 % Tolerance
1 ohm to 10 ohms
±100 ppm/°C
±200 ppm/°C
-200 ppm/°C to +500 ppm/°C
For Standard Values Used in Capacitors,
Inductors, and Resistors, click here.
Chip Dimensions
g
Dimension
Model
CR2010
Model
CR2512
L
5.00 ± 0.20
(0.197 ± 0.008)
6.30 ± 0.20
(0.248 ± 0.008)
W
2.50 ± 0.20
(0.098 ± 0.008)
3.10 ± 0.20
(0.122 ± 0.008)
H
0.60 ± 0.10
(0.024 ± 0.004)
0.60 ± 0.15
(0.024 ± 0.006)
I1
0.60 ± 0.25
(0.024 ± 0.010)
0.60 ± 0.25
(0.024 ± 0.010)
I2
0.60 ± 0.25
(0.024 ± 0.010)
0.60 ± 0.25
(0.024 ± 0.010)
Dimensional Drawing
I1
I1
H
I2
I2
W
L
DIMENSIONS ARE:
MM
(INCHES)
How To Order
CR 2010 - F X - 8252 E LF
Model
(CR = Chip Resistor)
Size
• 2010
• 2512
Resistance Tolerance
F = ±1 % ............Used with “X” TCR code only for values from 10 ohms through 1 megohm.
J = ±5 % ............Used with “W” TCR code for values from 10 ohms through 10 megohms. Used with “/” TCR code for zero ohm (jumper)
and for values from 1 ohm through 9.1 ohms.
TCR (ppm/°C)
X = ±100 ..............Used with “F” Resistance Tolerance code only for values from 10 ohms through 1 megohm.
W = ±200 ..............Used with “J” Resistance Tolerance code only for values from 10 ohms through 10 megohm.
/ = -250 to +500 ..Used with “J” Resistance Tolerance code only for zero ohm (jumper), and for values from 1 ohms through 9.1 ohms.
Resistance Value
For 1 % Tolerance:
<100 ohms..............“R” represents decimal point (example: 24R3 = 24.3 ohms)
≥100 ohms ..............First three digits are significant, fourth digit represents number of zeros to follow (example: 8252 = 82.5k Ω).
For 5 % Tolerance:
<10 ohms................“R” represents decimal point (example: 4R7 = 4.7 ohms)
≥10 ohms ................First two digits are significant, third digit represents number of zeros to follow (example: 474 = 470k ohms; 000 = Jumper).
Packaging
E = Embossed Plastic Tape (4,000 pcs.) on 7 ” Plastic Reel
Termination
LF = Tin-plated (RoHS compliant)
*RoHS Directive 2002/95/EC Jan 27 2003 including Annex
Specifications are subject to change without notice
Customers should verify actual device performance in their specific applications..
CR2010/CR2512 - Chip Resistors
Soldering Profile for RoHS Compliant Chip Resistors and Arrays
Marking Explanation
275
<1> Maximum of 20 seconds between
Resistors with 5 % tolerance may have a
3-digit or 4-digit resistance code.
Complete information about resistance
value and tolerance is found on the label of
the reel of chip resistors.
• 5 %: 3 digits, first two digits are
significant, third digit is number of
zeros to follow. Letter R is decimal point
for values from 1 to 9.9 ohms.
• 5 %: 4 digits, first three digits are
significant, fourth digit is number of
zeros to follow. Letter R is decimal point
for values from 1 to 99.9 ohms.
• 1 %: 4 digits, first three digits are
significant, fourth digit is number of
zeros to follow. Letter R is decimal for
values from 1 to 99.9 ohms.
260 °C peak
+255 °C and +260 °C
<1> 255 °C
225
Temperature (°C)
220 °C
190 °C
60 - 90
seconds
175
Ramp Down
6 °C/second
150 °C
125
60 - 120 seconds
10 seconds minimum
75
Ramp Up
3 °C/second maximum
25
0
50
100
150
Time (seconds)
200
250
300
Packaging Dimensions
4.0 ± 0.1
(.157 ± .004)
2.0 ± 0.05
(.079 ± .002)
A
B
F
Dimension
Model
CR2010
Model
CR2512
A
2.8 ± 0.2
(0.110 ± 0.008)
3.5 ± 0.2
(0.138 ± 0.008)
B
5.5 ± 0.2
(0.217 ± 0.008)
6.7 ± 0.2
(0.264 ± 0.008)
W
12.0 ± 0.3
(0.472 ± 0.012)
12.0 ± 0.3
(0.472 ± 0.012)
F
5.5 ± 0.05
(0.217 ± 0.002)
5.5 ± 0.05
(0.217 ± 0.002)
P0
4.0 ± 0.1
(0.157 ± 0.004)
4.0 ± 0.1
(0.157 ± 0.004)
W
P0
1.75 ± 0.1
(.059 ± .004)
1.5 +0.1/-0
(.056 + .004/-0)
2.0 ± 0.5
(.080 ± .020)
13.0 ± 0.5
(.512 ± .020)
80.0 ± 0.5
(3.150 ± .020)
20.0
MIN.
(.787)
REV. 02/08
Specifications are subject to change without notice
Customers should verify actual device performance in their specific applications..
178.0 ± 2.0
(7.008 ± .080)
16.7
MAX.
(.657)
DIMENSIONS ARE:
MM
(INCHES)
Similar pages