Isolated DC-DC Converters BOB5 Series -- 5 Watt BOTHHAND USA Features Wide 2 : 1 Input Voltage Range(4.5~9V,9~18V,18~36V,36~75V) Remote On/Off Input / Output Isolation Voltage: 1.5K Vdc Extended Operating Temperature Range: -40°C to +85°C Output Short Circuit Protection: Description Continuous & Auto Recovery The BOB5 Series are isolated 5W DC/DC converters. Designed Over Voltage Protection: Clamp Mode with highly efficiency, allow the operating temperature range of Meet EN55022, Class A (Radiation) these units to be -40°C to +85°C in a 24 pin DIP package with Shielded Metal Case with Insulated Baseplate industry-standard footprint. Further features include wide 2 : 1 input voltage range, remote on/off control, short-circuit protection Lead Free Design, RoHS Compliant 24pin DIP Package with Industry-Standard Footprint and over voltage protection. Customer Design Available Applications These converters are well suitable for battery operated equipment, measurement equipment, telecom, wireless network, Industry control system, everywhere where isolated, tightly regulated voltages and compact size are required. Technical Specification All specifications are typical at nominal input, full load and 25°C unless otherwise stated. Model Number BOB5-05S0 BOB5-05S1 BOB5-05S2 BOB5-05S3 BOB5-05D1 BOB5-05D2 BOB5-05D3 BOB5-12S0 BOB5-12S1 BOB5-12S2 BOB5-12S3 BOB5-12D1 BOB5-12D2 BOB5-12D3 BOB5-24S0 BOB5-24S1 BOB5-24S2 BOB5-24S3 BOB5-24D1 BOB5-24D2 BOB5-24D3 BOB5-48S0 BOB5-48S1 BOB5-48S2 BOB5-48S3 BOB5-48D1 BOB5-48D2 BOB5-48D3 Input Voltage Range 4.5~9V Nominal:5Vdc 9~18V Nominal:12Vdc 18~36V Nominal:24Vdc 36~75V Nominal:48Vdc E-mail: [email protected] Output Voltage (Vdc) 3.3 5 12 15 ±5 ±12 Full. Load No Load Full Load Eff . (%) 0 15 0 0 0 0 1200 1000 500 400 ±500 ±250 46 8 42 65 55 76 1115 1351 1558 1558 1351 1600 75 78 81 81 78 79 Capacitive Load, max. (3) (uF) 14700 6900 1660 880 2200 330 ±15 0 ±200 77 1579 80 330 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 12 0 0 0 0 0 0 17 0 0 0 0 0 0 0 0 0 0 0 0 0 1200 1000 500 400 ±500 ±250 ±200 1200 1000 500 400 ±500 ±250 ±200 1200 1000 500 400 ±500 ±250 ±200 21 22 25 27 22 31 32 10 10 12 14 12 17 17 6 6 7 8 7 9 9 440 541 625 617 541 625 617 223 267 313 313 271 316 313 111 135 156 156 135 156 156 79 81 84 85 81 84 85 78 82 84 84 81 83 84 78 81 84 84 81 84 84 4700 2630 330 220 1100 132 69 3200 3080 377 230 990 122 194 3750 2730 277 147 1330 230 132 Output Current (mA) Min. Load (1) http://www.bothhandUSA.com Input Current (mA) Rev:20100621A (2) Page 1 of 4 Isolated DC-DC Converters BOB5 Series -- 5 Watt BOTHHAND USA Input Specifications Input Voltage 5V nominal input 4.5-9Vdc 12V nominal input 9-18Vdc 24V nominal input 18-36Vdc 48V nominal input 36-75Vdc Input filter Pi Type 5V input 10Vdc 12V input 25Vdc Input surge voltage 24V input 50Vdc (100ms max.) 48V input 100Vdc Input reflected ripple current Nominal Vin and full load Start up time Nominal Vin and constant resistive load Remote ON/OFF 100mAp-p typ. 730ms typ. Open or 3.5V＜Vr＜12V Converter: ON Short Converter: OFF (4) or 0V＜Vr＜1.2V Sourcing current of remote control pin Nominal Vin ＜0.2 mA Idle input current (at Remote OFF state) Nominal Vin ＜2.5 mA Environmental Specifications Operating ambient temperature -40°C to +85°C (with derating) Maximum case temperature +100°C Storage temperature range -55°C to +105°C Relative humidity 5% to 95% RH Temperature coefficient ±0.02% / °C max. EMC Characteristics EMI EN55022 (radiation) Meet class A Output Specifications Output power Voltage accuracy 6 Watts max. Full load and nominal Vin ±1% Minimum load Line Regulation See table LL to HL at full load 25% load to full load Load Regulation Balanced load ±0.5% Single ±1% Dual ±0.5% Unbalanced load 25% to 100% full load Ripple and Noise 20MHz bandwidth ±3% 60mVp-p max. 3.3Vout models 3.9V Over voltage protection 5Vout models 6.2V (Zener Diode Clamp) 12Vout models 15V 15Vout models 18V Capacitive load Over load protection E-mail: [email protected] See table % of full load at nominal input http://www.bothhandUSA.com 150% typ. Rev:20100621A Page 2 of 4 Isolated DC-DC Converters BOB5 Series -- 5 Watt BOTHHAND USA Short circuit protection Continuous, automatic recovery Transient response settling time 50% load step change 490µs typ. Transient response over shoot di/dt=0.8A/µs ≤ ±5% of Vo Efficiency Nominal input See table Isolation voltage Input to output General Specifications Isolation resistance 1500Vdc 9 500Vdc 10 Ohms min. Isolation capacitance 280pF typ. Switching frequency 300kHz typ. 6 Reliability, calculated MTBF 2.40 × 10 Hrs Physical Specifications Case material Nickel-coated copper Base material Non-conductive black plastic Potting material Silicon rubber (UL94V-0) 1.25 × 0.80 × 0.40 Inch Dimensions (31.75 × 20.32 × 10.16 mm) 17.2g (0.59oz) typ. Weight BOB5 Series Output Power (%) Power Derating Curve(5) Ambient Temp.TA (℃ ℃) BOB5-48S1 Output Current vs. Efficiency Efficiency (%) Efficiency (%) BOB5-48S1 Input voltage vs. Efficiency Input voltage (V) E-mail: [email protected] Output Current (A) http://www.bothhandUSA.com Rev:20100621A Page 3 of 4 Isolated DC-DC Converters BOB5 Series -- 5 Watt BOTHHAND USA BOB5-48S1 BOB5-48S1 Transient Response at 50%~100% Max Load Loop Gain & Phase at Vi=48V,Full Load Note 1. Io below this value will not damage these converters, however, they may not meet all listed specifications. 2. Typical value, tested at nominal input and full load. 3. For each output. 4. Short to -Vin (Pin 2,3). 5. Based on BOB5-48S1. Mechanical Dimensions Pin 1 2 3 9 11 14 16 22 23 Pin Assignment Single Dual Remote On/Off Remote On/Off -Vin -Vin -Vin -Vin No pin Common No function -Vout +Vout +Vout -Vout Common +Vin +Vin +Vin +Vin Unit: mm [inch] Tolerance:±0.5[0.02] Specifications subject to change without notice. E-mail: [email protected] http://www.bothhandUSA.com Rev:20100621A Page 4 of 4