EMLSI EM7161FS32CW10LL 128k x16 bit super low power and low voltage full cmos static ram Datasheet

merging Memory & Logic Solutions Inc.
EM620FU16 Series
Low Power, 128Kx16 SRAM
Document Title
128K x16 bit Super Low Power and Low Voltage Full CMOS Static RAM
Revision History
Revision No.
History
0.0
Initial Draft
0.1
2’nd Draft
Draft Date
Remark
December 18, 2002
Add Pb-free part number
February 13 , 2004
Emerging Memory & Logic Solutions Inc.
IT Venture Tower Eastside 11F, 78, Karac-Dong, Songpa-Ku, Seoul, Rep.of Korea Zip Code : 138-160
Tel : +82-2-2142-1759~1766 Fax : +82-2-2142-1769 / Homepage : www.emlsi.com
The attached datasheets are provided by EMLSI reserve the right to change the specifications and products. EMLSI will answer to your
questions about device. If you have any questions, please contact the EMLSI office.
1
EM620FU16 Series
merging Memory & Logic Solutions Inc.
Low Power, 128Kx16 SRAM
FEATURES
GENERAL DESCRIPTION
•
•
•
•
•
•
The EM620FU16 families are fabricated by EMLSI’s
advanced full CMOS process technology. The families
support industrial temperature range and Chip Scale
Package for user flexibility of system design. The families also supports low data retention voltage for battery
back-up operation with low data retention current.
Process Technology : 0.18µm Full CMOS
Organization :128K x 16 bit
Power Supply Voltage : 2.7V ~ 3.3V
Low Data Retention Voltage : 1.5V(Min.)
Three state output and TTL Compatible
Package Type : 48-FPBGA 6.0x7.0
PRODUCT FAMILY
Power Dissipation
Product
Family
EM620FU16
Operating
Temperature
Vcc Range
Speed
Standby
(ISB1 , Typ.)
Operating
(ICC1.Max.)
Industrial (-40 ~ 85 oC)
2.7V~3.3V
551 )/70ns
1 µA
2 mA
PKG Type
48-FPBGA
1. The parameter is measured with 30pF test load.
PIN DESCRIPTION
FUNCTIONAL BLOCK DIAGRAM
1
2
3
4
5
6
A
LB
OE
A0
A1
A2
CS2
B
I/O 9
UB
A3
A4
CS1
I/O1
Pre-charge Circuit
I/O10 I/O11
D
V SS
E
VC C
A5
A6
I/O2
I/O3
I/O12
DNU
A7
I/O4
VCC
I/O13
DNU
A16
I/O5
V SS
VCC
Row S elect
C
A0
A1
A2
A3
A4
A5
A6
A7
I/O15 I/O14
A14
A15
I/O6
I/O7
G
I/O16 DNU
A12
A13
WE
I/O8
H
DNU
A9
A10
A11
DNU
A8
I/O1 ~ I/O8
UB
LB
CS1 ,CS 2
Name
Function
Chip select inputs
Vcc
Power Supply
OE
Output Enable input
Vss
Ground
WE
Write Enable input
UB
Upper Byte (I/O 9~16)
Address Inputs
LB
Lower Byte (I/O 1~8 )
A 0 ~A16
I/O1 ~I/O 16 Data Inputs/outputs
DNU
I/O Circuit
Column Select
A10 A11 A12 A13 A14 A15 A16
WE
OE
Function
Data
Cont
Data
Cont
48-FPBGA : Top view (ball down)
Name
1024 x 2048
A8
A9
I/O9 ~ I/O16
F
VSS
Memory Array
CS1
CS2
Do Not Use
2
Control Logic
EM620FU16 Series
merging Memory & Logic Solutions Inc.
Low Power, 128Kx16 SRAM
ABSOLUTE MAXIMUM RATINGS *
Parameter
Symbol
Voltage on Any Pin Relative to Vss
Ratings
Unit
VIN , VOUT
-0.2 to Vcc+0.3 (Max. 4.0V)
V
VCC
-0.2 to 4.0V
V
Power Dissipation
PD
1.0
W
Operating Temperature
TA
-40 to 85
oC
Voltage on Vcc supply relative to Vss
* Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. Functional
operation should be restricted to recommended operating condition. Exposure to absolute maximum rating conditions for extended
periods may affect reliability.
FUNCTIONAL DESCRIPTION
CS1
CS 2
OE
WE
LB
UB
I/O 1-8
I/O9-16
Mode
Power
H
X
X
X
X
X
High-Z
High-Z
Deselected
Stand by
X
L
X
X
X
X
High-Z
High-Z
Deselected
Stand by
X
X
X
X
H
H
High-Z
High-Z
Deselected
Stand by
L
H
H
H
L
X
High-Z
High-Z
Output Disabled
Active
L
H
H
H
X
L
High-Z
High-Z
Output Disabled
Active
L
H
L
H
L
H
Data Out
High-Z
Lower Byte Read
Active
L
H
L
H
H
L
High-Z
Data Out
Upper Byte Read
Active
L
H
L
H
L
L
Data Out
Data Out
Word Read
Active
L
H
X
L
L
H
Data In
High-Z
Lower Byte Write
Active
L
H
X
L
H
L
High-Z
Data In
Upper Byte Write
Active
L
H
X
L
L
L
Data In
Data In
Word Write
Active
Note: X means don’t care. (Must be low or high state)
3
EM620FU16 Series
merging Memory & Logic Solutions Inc.
Low Power, 128Kx16 SRAM
RECOMMENDED DC OPERATING CONDITIONS 1)
Parameter
1.
2.
3.
4.
Symbol
Min
Typ
Max
Unit
Supply voltage
VCC
2.7
3.0
3.3
V
Ground
VSS
0
0
0
V
Input high voltage
VIH
2.0
-
VCC + 0.22)
V
Input low voltage
VIL
-0.2 3)
-
0.6
V
TA= -40 to 85oC, otherwise specified
Overshoot: V CC +2.0 V in case of pulse width < 20ns
Undershoot: -2.0 V in case of pulse width < 20ns
Overshoot and undershoot are sampled, not 100% tested.
CAPACITANCE 1) (f =1MHz, TA=25oC)
Item
Symbol
Test Condition
Min
Max
Unit
Input capacitance
C IN
VIN=0V
-
8
pF
Input/Ouput capacitance
CIO
VIO =0V
-
10
pF
1. Capacitance is sampled, not 100% tested
DC AND OPERATING CHARACTERISTICS
Parameter
Symbol
Test Conditions
Min
Typ
Max
Unit
Input leakage current
ILI
V I N=V SS to V CC
-1
-
1
µA
Output leakage current
ILO
CS 1=V I H or CS 2 = VIL or O E=VIH or W E=VIL or LB= UB=V IH
V IO =V SS to V CC
-1
-
1
µA
Operating power supply
ICC
IIO =0mA, CS 1 =VIL , CS 2 =WE=VI H, VIN=V IH or V IL
-
-
2
mA
-
-
2
55ns
-
-
23
70ns
-
-
18
Cycle time=1µs, 100% duty, I IO=0mA,
ICC1
Average operating current
ICC2
CS 1 <0.2V, LB <0.2V or/and UB<0.2V, CS 2 >V CC-0.2V,
V IN <0.2V or VI N>V CC -0.2V
Cycle time = Min, I IO =0mA, 100% duty,
CS 1 = VIL , CS 2 = VIH, LB=V IL or/and UB = VIL ,
V IN =VIL or V IH
mA
mA
Output low voltage
VOL
IOL = 2.1mA
-
-
0.4
V
Output high voltage
VOH
IO H = -1.0mA
2.2
-
-
V
Standby Current (TTL)
IS B
CS 1 = VIH , CS2 =VIL, Other inputs=V IH or V IL
-
-
0.3
mA
I SB1
CS 1 >V CC-0.2V, CS 2> V C C-0.2V (CS 1 controlled)
or 0V <CS 2< 0.2V (CS2 controlled),
Other inputs = 0~V C C
-
1
5
µA
Standby Current (CMOS)
(Typ. condition : VCC=3.0V @ 25 o C)
(Max. condition : VCC =3.3V @ 85o C)
4
LL
LF
EM620FU16 Series
merging Memory & Logic Solutions Inc.
Low Power, 128Kx16 SRAM
VTM 3)
AC OPERATING CONDITIONS
Test Conditions (Test Load and Test Input/Output Reference)
R12)
Input Pulse Level : 0.4 to 2.2V
Input Rise and Fall Time : 5ns
Input and Output reference Voltage : 1.5V
Output Load (See right) : CL = 100pF+ 1 TTL
R22)
CL1)
CL 1) = 30pF + 1 TTL
1. Including scope and Jig capacitance
2. R1 =3070Ω,
R 2 =3150Ω
3. VTM=2.8V
READ CYCLE (V cc =2.7 to 3.3V, Gnd = 0V, T A = -40oC to +85oC)
Parameter
55ns
Symbol
70ns
Min
Max
Min
Max
Unit
Read cycle time
tRC
55
-
70
-
ns
Address access time
tAA
-
55
-
70
ns
Chip select to output
tco1, tco2
-
55
-
70
ns
Output enable to valid output
tO E
-
30
-
35
ns
UB, LB acess time
tBA
70
ns
Chip select to low-Z output
55
tLZ1, tLZ2
10
-
10
-
ns
UB, LB enable to low-Z output
tBLZ
10
-
10
-
ns
Output enable to low-Z output
tOLZ
5
-
5
-
ns
tHZ1, tHZ2
0
20
0
25
ns
UB, LB disable to high-Z output
tBHZ
0
20
0
25
ns
Output disable to high-Z output
tOHZ
0
20
0
25
ns
Output hold from address change
tOH
15
-
15
-
ns
Chip disable to high-Z output
WRITE CYCLE (Vcc =2.7 to 3.3V, Gnd = 0V, TA = -40oC to +85oC)
Parameter
55ns
Symbol
70ns
Unit
Min
Max
Min
Max
tWC
55
-
70
-
ns
tCW1, tCW2
45
-
60
-
ns
Address setup time
tAs
0
-
0
-
ns
Address valid to end of write
tAW
45
-
60
-
ns
UB, LB valid to end of write
tBW
45
-
60
-
ns
Write pulse width
tWP
45
-
55
-
ns
Write recovery time
tWR
0
-
0
-
ns
Write to ouput high-Z
tWHZ
0
20
0
25
ns
Data to write time overlap
tDW
25
Data hold from write time
tDH
0
-
0
-
ns
End write to output low-Z
tOW
5
-
5
-
ns
Write cycle time
Chip select to end of write
5
30
ns
merging Memory & Logic Solutions Inc.
EM620FU16 Series
Low Power, 128Kx16 SRAM
TIMING DIAGRAMS
TIMING WAVEFORM OF READ CYCLE(1).
(Address Controlled, CS1=OE=VIL, CS2= WE=V IH, UB or/and LB= VI L)
tRC
Address
tAA
tOH
Data Out
Previous Data Valid
Data Valid
TIMING WAVEFORM OF READ CYCLE(2) (WE = VIH)
tRC
Address
tAA
tOH
tCO
CS1
CS2
tHZ
tBA
UB,LB
tBHZ
tO E
OE
tOHZ
tOLZ
Data Out
High-Z
Data Valid
tBLZ
tLZ
NOTES (READ CYCLE)
1. t HZ and tOHZ are defined as the outputs achieve the open circuit conditions and are not referanced to output voltage levels.
2. At any given temperature and voltage condition, t HZ(Max.) is less than t LZ(Min.) both for a given device and from device to device
interconnection.
6
EM620FU16 Series
merging Memory & Logic Solutions Inc.
Low Power, 128Kx16 SRAM
TIMING WAVEFORM OF WRITE CYCLE(1) (WE CONTROLLED)
tWC
Address
tCW (2)
tWR (4)
CS1
CS2
tAW
tBW
UB ,LB
tWP (1)
WE
tAS(3)
Data in
tDH
tDW
High-Z
High-Z
Data Valid
tWHZ
Data out
tOW
Data Undefined
TIMING WAVEFORM OF WRITE CYCLE(2) (CS1 CONTROLLED)
tWC
Address
tAS(3)
tCW (2)
tWR(4)
CS1
CS2
tAW
tBW
UB,LB
tWP (1)
WE
tDW
Data in
Data out
Data Valid
High-Z
High-Z
7
tDH
EM620FU16 Series
merging Memory & Logic Solutions Inc.
Low Power, 128Kx16 SRAM
TIMING WAVEFORM OF WRITE CYCLE(3) (UB, LB CONTROLLED)
tWC
Address
tCW(2)
tW R(4)
CS1
CS2
tA W
tB W
UB ,LB
tW P(1)
tA S(3)
WE
tDW
Data in
Data out
tDH
Data Valid
High-Z
High-Z
NOTES (WRITE CYCLE)
1. A write occurs during the overlap(tWP ) of low CS1 and low WE. A write begins when CS 1 goes low and WE
goes low with asserting UB or LB for single byte operation or simultaneously asserting UB and LB for double
byte operation. A write ends at the earliest transition when CS1 goes high and WE goes high. The tWP is
measured from the beginning of write to the end of write.
2. t CW is measured from the CS1 going low to end of write.
3. t A S is measured from the address valid to the beginning of write.
4. t WR is measured from the end or write to the address change. tWR applied in case a write ends as CS1
or WE going high.
8
EM620FU16 Series
merging Memory & Logic Solutions Inc.
Low Power, 128Kx16 SRAM
DATA RETENTION CHARACTERISTICS
Parameter
Symbol
VCC for Data Retention
VDR
Data Retention Current
IDR
Chip Deselect to Data Retention Time
tSDR
Operation Recovery Time
tRDR
Test Condition
ISB1 Test Condition
(Chip Disabled)
1)
VCC =1.5V, ISB1 Test Condition
(Chip Disabled) 1)
See data retention wave form
Min
Typ
Max
Unit
1.5
-
3.3
V
-
0.5
-
µA
0
-
-
t RC
-
-
NOTES
1. See the IS B 1 measurement condition of datasheet page 4.
DATA RETENTION WAVE FORM
tSDR
Data Retention Mode
tRDR
Vcc
2.7V
2.2V
VDR
CS 1 > Vcc-0.2V
CS1
GND
Data Retention Mode
Vcc
2.7V
CS 2
tRDR
tSDR
VDR
0.4V
CS 2 < 0.2V
GND
9
ns
EM620FU16 Series
merging Memory & Logic Solutions Inc.
Low Power, 128Kx16 SRAM
Unit: millimeters
PACKAGE DIMENSION
48 Ball Fine Pitch BGA (0.75mm ball pitch)
Bottom View
Top View
A1 index Mark
B
B1
6
5
4
3
0.5
0.5
B
2 1
A
B
#A1
C
C1
C
C
D
C1/2
E
F
G
H
B/2
E2
0.26
Side View
Detail A
D
0.25 Typ.
E
E1
A
Min
Typ
Max
A
-
0.75
-
B
5.93
6.00
6.03
B1
-
3.75
-
C
6.93
7.00
7.03
C1
-
5.25
-
D
0.30
0.35
0.40
E
1.00
1.04
1.10
E1
-
0.79
-
E2
-
0.25
-
Y
-
-
0.08
0.79 Typ.
C
Y
NOTES.
1. Bump counts : 48(8row x 6column)
2. Bump pitch : (x,y)=(0.75x0.75) (typ.)
3. All tolerence are +/-0.050 unless
otherwise specified.
4. Typ : Typical
5. Y is coplanarity : 0.08(Max)
10
merging Memory & Logic Solutions Inc.
EM620FU16 Series
Low Power, 128Kx16 SRAM
MEMORY FUNCTION GUIDE
EM X XX X X X XX X X - XX XX
1. EMLSI Memory
11. Power
2. Device Type
10. Speed
3. Density
4. Option
9. Packages
5. Technology
8. Version
6. Operating Voltage
7. Orgainzation
1. Memory Component
8. Version
Blank ----------------- Mother Die
A ----------------------- First revision
B ----------------------- Second revision
C ----------------------- Third revision
D ----------------------- Fourth revision
2. Device Type
6 ------------------------ Low Power SRAM
7 ------------------------ STRAM
3. Density
1 ------------------------- 1M
2 ------------------------- 2M
4 ------------------------- 4M
8 ------------------------- 8M
16 ----------------------- 16M
32 ----------------------- 32M
64 ----------------------- 64M
9. Package
Blank ---------------------- Package
W --------------------- Wafer
10. Speed
45 ---------------------- 45ns
55 ---------------------- 55ns
70 ---------------------- 70ns
85 ---------------------- 85ns
10 --------------------- 100ns
12 --------------------- 120ns
4. Option
0 ----------------------- Dual CS
1 ----------------------- Single CS
5. Technology
Blank ------------------ CMOS
F ------------------------ Full CMOS
11. Power
LL ---------------------LF ---------------------L ---------------------S ----------------------
6. Operating Voltage
Blank ------------------- 5V
V ------------------------- 3.3V
U ------------------------- 3.0V
S ------------------------- 2.5V
R ------------------------- 2.0V
P ------------------------- 1.8V
7. Orginzation
8 ---------------------- x8 bit
16 ---------------------- x16 bit
32 ---------------------- x32 bit
11
Low Low Power
Low Low Power(Pb-Free)
Low Power
Standard Power
Similar pages