400V APT60D40B APT60D40BG* ® 60A APT60D40S APT60D40SG* *G Denotes RoHS Compliant, Pb Free Terminal Finish. ULTRAFAST SOFT RECOVERY RECTIFIER DIODE TO PRODUCT APPLICATIONS PRODUCT FEATURES PRODUCT BENEFITS • Anti-Parallel Diode -Switchmode Power Supply -Inverters • Free Wheeling Diode -Motor Controllers -Converters -Inverters • Snubber Diode • Ultrafast Recovery Times • Low Losses • Soft Recovery Characteristics • Low Noise Switching • PFC 7 D3PAK 1 2 • Cooler Operation • Popular TO-247 Package or Surface Mount D3PAK Package • Higher Reliability Systems • Low Forward Voltage • Low Leakage Current -2 4 2 1 2 1 • Increased System Power Density 1 - Cathode 2 - Anode Back of Case - Cathode MAXIMUM RATINGS Symbol VR All Ratings: TC = 25°C unless otherwise specified. Characteristic / Test Conditions Maximum Peak Repetitive Reverse Voltage VRWM Maximum Working Peak Reverse Voltage IF(AV) Maximum Average Forward Current (TC = 140°C, Duty Cycle = 0.5) IFSM TJ,TSTG TL UNIT 400 Volts Maximum D.C. Reverse Voltage VRRM IF(RMS) APT60D40B(G)_S(G) 60 RMS Forward Current (Square wave, 50% duty) 146 Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) 600 Amps -55 to 175 Operating and StorageTemperature Range °C 300 Lead Temperature for 10 Sec. STATIC ELECTRICAL CHARACTERISTICS Forward Voltage IRM Maximum Reverse Leakage Current CT Junction Capacitance, VR = 200V MIN TYP MAX IF = 60A 1.3 1.5 IF = 120A 1.6 IF = 60A, TJ = 125°C 1.2 Volts VR = VR Rated 250 VR = VR Rated, TJ = 125°C 500 APT Website - http://www.advancedpower.com 120 UNIT µA pF 4-2005 VF Characteristic / Test Conditions 053-4001 Rev F Symbol APT60D40B(G)_S(G) DYNAMIC CHARACTERISTICS Symbol Characteristic Test Conditions trr Reverse Recovery Time trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM IF = 1A, diF/dt = -100A/µs, VR = 30V, TJ = 25°C Maximum Reverse Recovery Current trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM Reverse Recovery Time Qrr Reverse Recovery Charge VR = 266V, TC = 25°C IF = 60A, diF/dt = -200A/µs Maximum Reverse Recovery Current trr IRRM IF = 60A, diF/dt = -200A/µs VR = 266V, TC = 125°C IF = 60A, diF/dt = -800A/µs Maximum Reverse Recovery Current VR = 266V, TC = 125°C MIN TYP MAX UNIT - 30 - 37 - 80 - 4 - 110 ns - 540 nC - 10 - 65 ns - 1050 nC - 27 Amps MIN TYP ns nC - - Amps Amps THERMAL AND MECHANICAL CHARACTERISTICS Symbol Characteristic / Test Conditions MAX RθJC Junction-to-Case Thermal Resistance .34 RθJA Junction-to-Ambient Thermal Resistance 40 WT Torque Package Weight oz 5.9 g 10 lb•in 1.1 N•m APT Reserves the right to change, without notice, the specifications and information contained herein. 0.9 0.7 0.20 0.5 Note: 0.15 0.3 0.10 t2 0.1 SINGLE PULSE 0.05 10 -5 Duty Factor D = 1/t2 Peak TJ = PDM x ZθJC + TC 10 10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (seconds) FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION -4 RC MODEL 4-2005 Junction temp (°C) 053-4001 Rev F t1 t 0.05 0 PDM Z JC, THERMAL IMPEDANCE (°C/W) θ 0.35 0.25 0.129 °C/W 0.0107 J/°C 0.211 °C/W 0.120 J/°C Power (watts) Case temperature (°C) FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL °C/W 0.22 Maximum Mounting Torque 0.30 UNIT TYPICAL PERFORMANCE CURVES 180 120 100 80 TJ = 125°C 40 TJ = 150°C 20 0 TJ = 25°C 0 Qrr, REVERSE RECOVERY CHARGE (nC) 1400 T = 125°C J V = 266V R 1200 120A 1000 60A 800 600 30A 400 200 0 0 200 400 600 800 1000 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 4. Reverse Recovery Charge vs. Current Rate of Change 1.2 trr 1.0 R 120 60A 100 30A 80 60 40 0 0 200 400 600 800 1000 -diF /dt, CURRENT RATE OF CHANGE(A/µs) Figure 3. Reverse Recovery Time vs. Current Rate of Change 30 T = 125°C J V = 266V R 25 120A 20 60A 15 30A 10 5 0 0 200 400 600 800 1000 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 5. Reverse Recovery Current vs. Current Rate of Change 180 Qrr Duty cycle = 0.5 T = 175°C 160 J 140 IRRM 0.8 IF(AV) (A) 120 trr 0.6 0.4 100 80 60 Qrr 0.2 0.0 T = 125°C J V = 266V 120A 20 TJ = -55°C 0.5 1 1.5 2 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage Kf, DYNAMIC PARAMETERS (Normalized to 800A/µs) trr, REVERSE RECOVERY TIME (ns) 140 IRRM, REVERSE RECOVERY CURRENT (A) IF, FORWARD CURRENT (A) 160 60 APT60D40B(G)_S(G) 140 40 20 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 6. Dynamic Parameters vs. Junction Temperature 0 25 50 75 100 125 150 175 Case Temperature (°C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 700 600 500 400 4-2005 300 200 100 0 1 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage 053-4001 Rev F CJ, JUNCTION CAPACITANCE (pF) 800 APT60D40B(G)_S(G) Vr diF /dt Adjust +18V APT30M30LLL 0V D.U.T. 30µH trr/Qrr Waveform PEARSON 2878 CURRENT TRANSFORMER Figure 9. Diode Test Circuit 1 IF - Forward Conduction Current 2 diF /dt - Rate of Diode Current Change Through Zero Crossing. 3 IRRM - Maximum Reverse Recovery Current. 4 trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. 5 1 4 Zero 5 0.25 IRRM 3 2 Qrr - Area Under the Curve Defined by IRRM and trr. Figure 10, Diode Reverse Recovery Waveform and Definitions 3 D PAK Package Outline TO-247 Package Outline 15.49 (.610) 16.26 (.640) 6.15 (.242) BSC 5.38 (.212) 6.20 (.244) 4.90 (.193) 5.10 (.201) 1.45 (.057) 1.60 (.063) 20.80 (.819) 21.46 (.845) Cathode 4-2005 053-4001 Rev F e3 100% Sn Cathode (Heat Sink) e1 SAC: Tin, Silver, Copper 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 0.40 (.016) 0.65 (.026) 4.50 (.177) Max. 19.81 (.780) 20.32 (.800) 1.65 (.065) 2.13 (.084) 1.01 (.040) 1.40 (.055) 1.00 (.039) 1.15(.045) 12.40 (.488) 12.70 (.500) 0.020 (.001) 0.250 (.010) 2.70 (.106) 2.90 (.114) 1.15 (.045) 1.45 (.057) 1.20 (.047) 1.90 (.075) 1.40 (.055) 2.10 (.083) 5.45 (.215) BSC (2 Plcs.) Anode 2.21 (.087) 2.59 (.102) 13.30 (.524) 13.60(.535) 18.70 (.736) 19.10 (.752) 3.50 (.138) 3.81 (.150) 0.40 (.016) 0.79 (.031) 15.85 (.624) 16.05(.632) Cathode 10.90 (.430) BSC Dimensions in Millimeters and (Inches) 2.40 (.094) 2.70 (.106) (Base of Lead) Heat Sink (Cathode) and Leads are Plated Anode Cathode Dimensions in Millimeters (Inches) APT’s products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.