CAR0812FP Series 850 Watt +12V Front End Power Supply Features: ∎ Compact 1U Profile ∎ High Efficiency design optimized for mid to light load applications ∎ Constant Current Characteristic ∎ N+1 Redundancy with Warm Plug Capability (IEC-320 AC Inlet) ∎ High Power Density (18W/in3) ∎ 3.3VSB, Active Load Sharing, I²C and PMBus standard Interface, Remote On/Off and Remote Sense functions FEATURES BENEFITS High Power Density 18W/in3 More system space for application circuits and hardware Load Sharing & Fault Tolerant Excellent reliability in N+1 operation KEY MARKET SEGMENTS & APPLICATIONS ∎ Distributed Power Blade Servers Network Equipment Automatic Fan Speed Control Reduces audible noise and increases reliability ∎ Mid-End Servers System Scalability up to 3.2kW Allows flexibility with minimum investment ∎ Network Attached Storage Universal Input & International Certifications Reduces logistical costs ∎ Storage Area Networks SPECIFICATIONS 850 Watt +12V Front End Power Supply Input Voltage Range 85-264 VAC, 47-63 Hz, derate to 750W for <90VAC Input Input Current Maximum 11A (full load, Vin = 100Vac) / 12A (full load, Vin = 90Vac) Inrush Current 40A max. cold start (Measured at 25ºC for all line conditions typical duration 10ms) Input Protection Single fuse (line) – 15A & 250Vac (Type 3AB Axial) Power Factor 0.99 typical at full load, complies with IEC555, EN60555-2, EN61000-3-2 Efficiency Up to 92.5% Efficiency at 50% Load and 230 VAC Operation Output Power 850W derate to 750W for <90VAC Input Output Voltage Range 10.8~13.2 VDC with remote programming Output Current 71.0A @ 12V (no minimum load required) Standby Bias Voltage 3.3VSB@1A (optional 5Vsb) Voltage Regulation ±2% of Vnom for any combination of line, load and temperature Output Ripple & Noise 1% (pk-pk) @ 20MHz with 0.1μF ceramic and 10μF electrolytic caps at the output Transient Response 5% max deviation Recovery time 500μs @ 50% load step and di/dt < 1A/μs (for system loads >10%) Hold-Up Time 12ms at 850W typical (Early Warning: 2ms) Remote On/Off ON if >3V or open; OFF if <1V (max. sink 1mA) Open collector type Current Limit Protection Adjustable via I²C interface or PMBus, Constant current characteristic & power limited to 850W Short Circuit Protection Self protected with auto recovery Over Voltage Protection Trip level >+14.8Vdc ± 1V, Reset condition by recycling the AC input or applying Remote ON/OFF Operating Temperature -10°C to +70°C. derate above 50°C at 2.5%/°C (startup -40° C, meet specified spec with 30min. warm period) Over Temperature Protection Non-Latching, thermal shutdown point is set for 125°C and recovery point is 110°C EMI FCC-B & EN55022-B with specified filter or at rack level, GR-1089-CORE LED Indicators AC OK (Green) / DC OK (Green) / Thermal Alarm (Orange) / Fault (Red), “All on one LED” Tri-color LED Analog Status & Control Voltage Programming (V Prog), Load sharing (I Share), Remote On/Off, Current Monitor (I Monitor), AC OK, DC OK, Temperature Warning, Fault, PS Present, Module Enable Digital Status & Control I2C Option and PMBus, see detailed specification for details Shock & Vibration NEBS GR-63-CORE Level 3 Dimensions 8.73 x 3.38 x 1.61” / 221.7 x 85.9 x 40.9mm Weight 4.28 lb. / 1.94 kg. Safety Approvals IEC/UL/CSA/EN60950-1, CE Mark (LVD), TUV rev 100728 www.lineagepower.com/oem Lineage Power Lineage Power Lineage Power (China) 601 Shiloh Rd. Plano, TX 75074 Phone: +1.972.244.9722 2841 Dow Avenue Tustin, CA 92780 USA Phone: +1.714.544 6665 3F, #9 Building, #456 Hong Cao Road Shanghai 200233, China Phone: +86.021.54279977*808 CAR0812FP Series 850 Watt +12V Front End Power Supply OUTLINE DRAWING All Dimensions in Inches (mm) Tolerance: .XX = ± .02 in (.50 mm) .XXX = ± .010 in (.254 mm) EFFICIENCY CURVE: 100% Efficiency 90% 91% 90% 82.5% 80% 83% CONNECTOR DRAWING: 92.5% 91% 90% 1 2 3 4 5 6 D 88% 89% 90% 89% C 87% P1 P2 P3 P4 B A 230 VAC 115 VAC 70% FCI Berg P/N: 51722-10402400ABLF / Lineage Power Part Number 822024 Mating connector: 51762-10402400ABLF / Lineage Power Part number 822089 60% 0% 10% 20% 30% 50% 75% 100% Load PART NUMBER DEFINITION GUIDE: Example: CAR0812FPBZ0-1A 850W/12V Front End, Bezel, 6 of 6 RoHS PIN OUT INFORMATION A1 VSB 3.3V B4 PS Present A2 VSB 3.3V Return B5 SDA (I2C bus) D2 N/A P2 +Vout A3 Signal Return B6 SCL (I2C bus) D3 Remote ON/OFF P3 Output Return A4 Write Protect C1 ISHARE D4 DC OK P4 Output Return A5 Remote Sense + C2 N/C D5 AC OK A6 Remote Sense - C3 N/A D6 Interrupt (/SM BALERT) B1 Fault C4 I2C Address (A0) B2 N/A C5 I2C Address (A1) B3 Module Enable C6 I2C Address (A2) rev 100728 D1 VProg P1 +Vout www.lineagepower.com/oem Lineage Power Lineage Power Lineage Power (China) 601 Shiloh Rd. Plano, TX 75074 Phone: +1.972.244.9722 2841 Dow Avenue Tustin, CA 92780 USA Phone: +1.714.544 6665 3F, #9 Building, #456 Hong Cao Road Shanghai 200233, China Phone: +86.021.54279977*808