VER : B_8 update : 2015.11.16 AC-DC Power Module ANC50 SERIES 50 Watts KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Regulated Output and Low Ripple and Noise Small Size as ANC 15Watt with 50Watt Higher Power CE, UL Approval 3-Year Product Warranty ELECTRICAL SPECIFICATIONS All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. Model No. ( Single Output ) Max Output Wattage (W) Voltage Input Output Protection Isolation Environment Physical ANC50-5S 40W ANC50-12S 50W ANC50-15S 50W ANC50-24S 50W ANC50-48S 50W 90-264 VAC or 120-370 VDC Frequency (Hz) 47-63 Hz Current (Full load) 1000 mA max. (115 VAC) / 600 mA max. (230 VAC) Inrush Current (<2ms) 40 A max. (115 VAC) / 60 A max. (230 VAC) Leakage Current 0.25 mA max. External Fuse (recommend) 3.15 A slow blow type Voltage (V.DC.) 5V Voltage Accuracy ±2% 12V 15V 24V 48V 4167 3333 2083 1040 Current (mA) max 8000 Line Regulation (LL-HL) (typ.) ±1% Load Regulation (0-100%) (typ.) ±1% Minimum Load 0% Maximum Capacitive Load 10000 uF 3500 uF 3000 uF 2200 uF 330uF Ripple & Noise 120mV 120mV 150mV 240mV 480mV Efficiency (at 230 VAC) 86% 90% 87% 88% 89% Hold-up Time 10 ms min. Switching Frequency (typ.) ( at 230 VAC ) 65 kHz Over Power Protection Hiccup technique, auto-recovery Over Voltage Protection Zener diode clamp Short Circuit Protection Hiccup mode, indefinite (automatic recovery) Input-Output (V.AC) 3000V Input-FG (V.AC) 1500V Output-FG (V.AC) 500V Operating Temperature -40°C…+70°C (with derating) Storage Temperature -40°C…+85°C Temperature Coefficient ±0.02%/°C Humidity 95% RH MTBF >300,000 h @ 25°C (MIL-HDBK-217F) Dimension (L x W x H) 2.91 x 2.13 x 0.86 Inches Case Material Plastic resin (flammability to UL 94V-0) Weight 166 g Cooling Method Free air convection http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 ( 74.1 x 54.1 x 21.8 mm ) Tolerance 0.5 mm -1- VER : B_8 update : 2015.11.16 AC-DC Power Module ANC50 SERIES 50 Watts ELECTRICAL SPECIFICATIONS All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. Model No. Safety EMC ( Single Output ) Agency Approvals ANC50-5S CE, UL/cUL EMI (Conducted & Radiated Emission) EN 55022 EMS (Noise Immunity) EN 55024 ANC50-12S ANC50-15S ESD EN61000-4-2 air ± 8kV , Contact ± 4kV (A) Radiated Immunity EN61000-4-3 3V/m (A) Fast Transient EN61000-4-4 ± 1kV (A) Surge EN61000-4-5 ±2kV (A) Conducted Immunity EN61000-4-6 3Vrms PFMF EN61000-4-8 1A/m (A) Dips EN61000-4-11 30% 500ms (A) ANC50-24S ANC50-48S (A) NOTE 1. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor. 2. It's recommended to add Varistor 14S471K at L / N input side in parallel. 3. Please refer to our PDF file "AC-DC Application" on our website: www.archcorp.com.tw MECHANICAL DIMENSION BLOCK DIAGRAM ( Top View ) PIN# Single 1 AC IN (N) 2 AC IN (L) 3 -DC OUT 4 +DC OUT http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 DERATING -2-