DFB2005 - DFB20100 Glass-Passivated Bridge Rectifiers Features • • • • • • • • UL Certificate: # E258596 Glass-Passivated Junction Ideal for Printed Circuit Board Reliable Low-Cost Construction Plastic Material has Underwriters Laboratory Flammability Classification 94V-0 Surge Overload Rating to 250 A Peak High Case Dielectric Strength: 2000 VRMS Isolated Voltage from Case to Lead: > 2500 V + ~ ~ - TS-6P Ordering Informations Part Number Marking DFB2005 DFB2005 DFB2010 DFB2010 DFB2020 DFB2020 DFB2040 DFB2040 DFB2060 DFB2060 DFB2080 DFB2080 DFB20100 DFB20100 © 2009 Fairchild Semiconductor Corporation DFB2005 - DFB20100 Rev. 1.2.2 Package Packing Method TS-6P 4L Rail www.fairchildsemi.com 1 DFB2005 - DFB20100 — Glass-Passivated Bridge Rectifiers October 2013 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted. Value Symbol Parameter VRRM Maximum Recurrent Peak Reverse Voltage VRMS DFB 2005 DFB 2010 DFB 2020 DFB 2040 DFB 2060 DFB 2080 DFB Units 20100 50 100 200 400 600 800 1000 V Maximum RMS Voltage 35 70 140 280 420 560 700 V VDC Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 V I(AV) Maximum Average Forward Rectified Current 20 A IFSM Peak Forward Surge Current (8.3 ms Single Half-wave) 250 A RθJC Typical Thermal Resistance(2) 4.75 °C/W TJ Operating Temperature Range -55 to +150 °C Storage Temperature Range -55 to +150 °C TSTG Notes: 1. Single-phase, half-wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. 2. Device mounted on 4 inch x 5 inch x 0.25 inch Al-plate heat sink. Electrical Characteristics Values are at TA = 25°C unless otherwise specified. Symbol Parameter Test condition Value Unit Maximum 10 A 1.0 Instantaneous Forward Voltage 20 A 1.1 IR Maximum DC Reverse Current at Rated DC Blocking Voltage TA = 25°C 10 TA = 125°C 500 I2t Rating for Fusing (t < 8.3 ms) 259 A2s CJ Typical Junction Capacitance per Leg(3) 140 pF VF V μA Note: 3. Measured at 1 MHz and applied reverse bias of 4.0 V DC. © 2009 Fairchild Semiconductor Corporation DFB2005 - DFB20100 Rev. 1.2.2 www.fairchildsemi.com 2 DFB2005 - DFB20100 — Glass-Passivated Bridge Rectifiers Absolute Maximum Ratings(1) Average Forward Current, [A] 25 20 15 10 5 0 0 20 40 60 80 100 120 140 160 o Case Temperature, [ C] Figure 1. Maximum Derating Curve for Output Current Figure 2. Maximum Forward Surge Current per Leg Figure 3. Typical Reverse Characteristics per Leg Figure 4. Typical Forward Characteristics per Leg Figure 5. Typical Junction Capacitance © 2009 Fairchild Semiconductor Corporation DFB2005 - DFB20100 Rev. 1.2.2 www.fairchildsemi.com 3 DFB2005 - DFB20100 — Glass-Passivated Bridge Rectifiers Typical Performance Characteristics TS-6P 30.30 29.70 CL 3.40 3.10 3.0 x45 11.20 10.80 4.20 3.80 + ~ ~ 4.80 4.40 4.80 3.80 3.40 20.30 19.70 - 2.50 18.00 17.00 2.40 (4X) 2.00 2.90 2.50 1.10 (4X) 0.90 7.50 7.30 10.20 9.80 0.70 0.60 7.70 7.30 NOTES: A. THIS PACKAGE DOES NOT CONFORM TO ANY STANDARDS. B. ALL DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR PROTRUSIONS. D. DRAWING FILE NAME: TS6P04AREV1 Figure 6. 4-LEAD, TS6P, THROUGH-HOLE, MOLDED PACKAGE (ACTIVE) Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/dwg/TS/TS6P04A.pdf. © 2009 Fairchild Semiconductor Corporation DFB2005 - DFB20100 Rev. 1.2.2 www.fairchildsemi.com 4 DFB2005 - DFB20100 — Glass-Passivated Bridge Rectifiers Physical Dimensions TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. AccuPower¥ AX-CAP®* BitSiC¥ Build it Now¥ CorePLUS¥ CorePOWER¥ CROSSVOLT¥ CTL¥ Current Transfer Logic¥ DEUXPEED® Dual Cool™ EcoSPARK® EfficientMax¥ ESBC¥ F-PFS¥ FRFET® SM Global Power Resource GreenBridge¥ Green FPS¥ Green FPS¥ e-Series¥ Gmax¥ GTO¥ IntelliMAX¥ ISOPLANAR¥ Making Small Speakers Sound Louder and Better™ MegaBuck¥ MICROCOUPLER¥ MicroFET¥ MicroPak¥ MicroPak2¥ MillerDrive¥ MotionMax¥ mWSaver® OptoHiT¥ OPTOLOGIC® OPTOPLANAR® ® Fairchild® Fairchild Semiconductor® FACT Quiet Series¥ FACT® FAST® FastvCore¥ FETBench¥ FPS¥ Sync-Lock™ ® PowerTrench® PowerXS™ Programmable Active Droop¥ QFET® QS¥ Quiet Series¥ RapidConfigure¥ ¥ Saving our world, 1mW/W/kW at a time™ SignalWise¥ SmartMax¥ SMART START¥ Solutions for Your Success¥ SPM® STEALTH¥ SuperFET® SuperSOT¥-3 SuperSOT¥-6 SuperSOT¥-8 SupreMOS® SyncFET¥ ®* TinyBoost® TinyBuck® TinyCalc¥ TinyLogic® TINYOPTO¥ TinyPower¥ TinyPWM¥ TinyWire¥ TranSiC¥ TriFault Detect¥ TRUECURRENT®* PSerDes¥ UHC® Ultra FRFET¥ UniFET¥ VCX¥ VisualMax¥ VoltagePlus¥ XS™ * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in cause the failure of the life support device or system, or to affect its safety or effectiveness. accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I66 © Fairchild Semiconductor Corporation www.fairchildsemi.com