RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 [email protected] www.rsg-electronic.de ■ ■ ■ ■ ■ EC2SA ELECTRONIC COMPONENTS S E ■ Änderungen vorbehalten / subject to change without notice R I E NEW Specifications EC2SA Series Derating Curve INPUT SPECIFICATIONS: E C 2 S A RSG Input Voltage Range........................ 5V..............................................4.5-9V 12V..............................................9-18V 24V............................................18-36V 48V............................................36-75V Input Filter.....................................................................................Capacitive S Remote on/off control : Module On……………………< 1.2VDC or Open Circuit 2 WATT REGULATED DC-DC CONVERTERS Module Off………………………..……….......5.5…15VDC Module Off (input idle current)……..………..1mA max. OUTPUT SPECIFICATIONS: Voltage Accuracy : ..........................................………............... ±1.5% max. Voltage Balance(Dual) ……………………………………………. ±1.0% max. Cross regulation(Dual)1..…Asymmetrical load 25%/100%.......±5.0% max. Transient Response: 25% Step Load Change Error Band ……………………………... ±6% Vout nominal Regulated Outputs Remote On/Off Control 1500VDC Isolation Continuous Short Circuit Protection Output Short Circuit Protection .........................................…... Continuous GENERAL SPECIFICATIONS: 3.3VDC 0 mA 500 mA 458 mA 72 EC2SA-05S05 5VDC 0 mA 400 mA 526 mA 76 EC2SA-05S12 12VDC 0 mA 167 mA 507 mA 79 15VDC 0 mA 134 mA 503 mA 80 EC2SA-05D05 ±5VDC ±0 mA ±200 mA 526 mA 76 EC2SA-05D12 ±12VDC ±0 mA ±83 mA 498 mA 80 EC2SA-05D15 ±15VDC ±0 mA ±67 mA 503 mA 80 Case Material ……………………………….. Non-Conductive Black Plastic EC2SA-12S33 3.3VDC 0 mA 500 mA 186 mA 74 Weight…………………………………………….……………………............4.8g EC2SA-12S05 5VDC 0 mA 400 mA 214 mA 78 EC2SA-12S12 12VDC 0 mA 167 mA 206 mA 81 15VDC 0 mA 134 mA 204 mA 82 EC2SA-12D05 ±5VDC ±0 mA ±200 mA 208 mA 80 EC2SA-12D12 ±12VDC ±0 mA ±83 mA 202 mA 82 EC2SA-12D15 ±15VDC ±0 mA ±67 mA 204 mA 82 EC2SA-24S33 3.3VDC 0 mA 500 mA 90 mA 76 EC2SA-24S05 5VDC 0 mA 400 mA 107 mA 78 EC2SA-24S12 12VDC 0 mA 167 mA 103 mA 81 15VDC 0 mA 134 mA 102 mA 82 EC2SA-24D05 ±5VDC ±0 mA ±200 mA 107 mA 78 EC2SA-24D12 ±12VDC ±0 mA ±83 mA 102 mA 81 EC2SA-24D15 ±15VDC ±0 mA ±67 mA 102 mA 82 EC2SA-48S33 3.3VDC 0 mA 500 mA 46 mA 74 EC2SA-48S05 5VDC 0 mA 400 mA 53 mA 78 EC2SA-48S12 12VDC 0 mA 167 mA 51 mA 82 EC2SA-24S15 9-18 VDC 18-36 VDC 60 mA 30 mA 18 mA 15VDC 0 mA 134 mA 50 mA 83 EC2SA-48D05 ±5VDC ±0 mA ±200 mA 53 mA 78 EC2SA-48D12 ±12VDC ±0 mA ±83 mA 50 mA 83 EC2SA-48D15 ±15VDC ±0 mA ±67 mA 51 mA 82 EC2SA-48S15 36-75 VDC 9 mA CASE Efficiency..............................................................…..……...............See Table Isolation Voltage ..........……………………....……..….............1500VDC min. Isolation Resistance .........................…...............……............10^9 ohm min. PIN CONNECTION Switching Frequency ......................….............……....................100KHz min. Pin Operating Ambient Temperature……………..…................ -40°C to +85°C De-rating, Above 85°C ………………….. Linearly to Zero power at 100°C SIP-8 1 2 3 5 6 7 8 Case Temperature4…………………………………...................... 100°C max. Cooling…………………………………….………….........Natural Convection Storage Temperature ………………....….......……............. -55°C to +125°C Dimensions …………..….......0.86×0.36x0.44 inches(21.80x9.20×11.10 mm) SIP-8 Single Output Dual Outputs -V Input +V Input CTRL NC +V Output -V Output NC -V Input +V Input CTRL NC +V Output Common -V Output CASE A All Dimensions In Inches(mm) Tolerance Inches: .xx= ±.02, .xxx= ±.002 Millimeters: .x= ±.5, .xx= ±.05 0.86 (21.8) 0.02 (0.5) EC2SA-12S15 4.5-9.0 VDC % EFF. 0.16 (4.1) EC2SA-05S15 FULL LOAD SIP-8 0.10 (2.5) 0.70 (17.8) 0.01 (0.3) EC2SA-05S33 NO LOAD not exceed 100˚C. Dual……….………………........... ±1.0% max. MAX. INPUT CURRENT 4. Maximum case temperature under any operating condition should Load Regulation3……..………Single……..........…...................... ±0.5% max. MIN. OUTPUT CURRENT 3. Measured From Full Load to 10% Load Line Regulation2 .…….…............……………….......................…. ±0.5% max. OUTPUT VOLTAGE INPUT VOLTAGE 2. Measured From High Line to Low Line Temperature Coefficient...........................……….....….......…..... ±0.03%/°C 0.44 (11.2) MODEL NUMBER • • • • Bottom View 1 2 3 SIP-8 5 6 7 8 0.08 (2.0) 0.02 (0.5) NOTE: 1. Nominal Input Voltage 5, 12, 24 or 48 VDC All Specifications Typical At Nominal Line, Full Load and 25˚C Unless Otherwise Noted. 0.36 (9.1) 2W Isolated Output SIP-8 Package Efficiency to 83% 2:1 Input Range 1. For asymmetric loading, Both channels must be at 25% load or more. Ripple & Noise, 20MHz BW......………..………………….. 75mV pk-pk, max. 0.14 (3.5) • • • • NOTE: Recovery Time ……………………….....................< 500us Features