Ceramic Bandpass Filter 50Ω BFCN-1690+ 1570 to 1810 MHz Features • • • • Good VSWR, 1.29:1 typ. @ passband Small size(0.126 x .063 x .035) Temperature stable LTCC construction CASE STYLE: FV1206-1 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications • Harmonic rejection • Transmitters / Receivers e and Reel Available Tapra cost at no ext Reel Size 7” Devices/Reel 20, 50, 100, 200, 500,1000, 3000 Electrical Specifications1,2 at 25°C Specification Definition Parameter INSERTION LOSS (dB) Pass Band Stop Band, Lower Stop Band, Upper DC F3 F1 F2 F4 FREQUENCY (MHz) F5 — F1 - F2 F1 - F2 DC - F3 DC - F3 Insertion Loss VSWR F4 - F5 F4 - F5 Frequency (MHz) Min. Typ. 1570 - 1810 1570 - 1810 1200 1200 — — 17 17 1690 2.5 1.29 25.5 24 Max. 5.0 2.0 — — 2170 - 4400 2170 - 4400 20 5 30 20 — — Unit MHz dB :1 dB :1 dB :1 1. Measured on Mini-Circuits Characterization Test Board TB-285. 2. This filter is not intended for use as a DC Blocking circuit element. In Application where DC voltage is present at either input or output ports, blocking capacitors are required at the corresponding RF port. Maximum Ratings Functional Schematic RF IN F# Center Frequency Insertion Loss VSWR Insertion Loss VSWR RF OUT Operating Temperature Storage Temperature RF Power Input* -55°C to +100°C -55°C to +100°C 1.0W at 25°C *Passband rating, derate linearly to 0.25W at 100°C ambient Permanent damage may occur if any of these limits are exceeded. BFCN-1690+ INSERTION LOSS (Pass Band) BFCN-1690+ INSERTION LOSS (Full Band) 0 Top View INSERTION LOSS (dB) INSERTION LOSS (dB) 0 20 40 60 80 Bottom View 3 4 500 1000 1500 2000 2500 3000 3500 4000 4500 FREQUENCY (MHz) 3 2.0 3.0 1.8 2.5 GROUP DELAY (nsec) VSWR 1 1610 1650 1690 1730 FREQUENCY (MHz) 1770 1810 BFCN-1690+ GROUP DELAY BFCN-1690+ VSWR Pad Connections Input Output Ground 2 5 1570 100 0 1 1.6 1.4 1.2 2.0 1.5 1.0 0.5 1.0 1570 0.0 2,4,5,6 1610 1650 1690 1730 1770 1810 1570 1610 1650 1690 1730 1770 Notes FREQUENCY (MHz) FREQUENCY (MHz) A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] 1810 REV. B M151107 ED-16214/2 BFCN-1690+ AVM/CP/AM 150601 Page 1 of 2 BFCN-1690+ Bandpass Filter Full Band Performance Frequency (MHz) Insertion Loss (dB) 10.00 50.00 100.00 500.00 1000.00 1070.00 1200.00 1570.00 1690.00 1780.00 1810.00 2120.00 2170.00 3400.00 4000.00 4200.00 4400.00 116.31 83.75 72.51 48.23 43.02 35.77 25.09 2.84 2.53 2.75 2.95 27.35 36.01 31.15 33.62 38.51 27.14 Pass Band Performance VSWR (:1) Frequency (MHz) 177.17 147.73 119.76 62.19 35.56 30.60 20.81 1.36 1.30 1.21 1.27 6.94 8.07 70.42 56.00 39.90 19.50 1570.00 1600.00 1610.00 1620.00 1630.00 1640.00 1650.00 1660.00 1670.00 1680.00 1690.00 1700.00 1710.00 1720.00 1750.00 1780.00 1810.00 Insertion Loss (dB) 2.84 2.72 2.69 2.66 2.63 2.61 2.59 2.57 2.55 2.54 2.53 2.53 2.53 2.54 2.62 2.75 2.95 Group Delay (nsec) 1.59 1.53 1.48 1.46 1.46 1.45 1.46 1.46 1.47 1.48 1.49 1.49 1.51 1.52 1.55 1.60 1.68 (ON TOP) Pad Connections Input Output Ground 1 3 2,4,5,6 (ON TOP) Product Marking: BL Demo Board MCL P/N: TB-285 Suggested PCB Layout (PL-158) Outline Drawing PCB Land Pattern (ON TOP) (ON TOP) Suggested Layout, Tolerance to be within ±.002 PCB Land Pattern Outline Dimensions ( inch mm ) A .126 3.20 B .063 1.60 C .035 0.89 D .024 0.61 G .039 0.99 H .024 0.61 J .042 1.07 K .123 3.12 E .022 0.56 F .011 0.28 wt grams .020 Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. Suggested Layout,specifications and performance data contained in this specification document B. Electrical Tolerance to be within ±.002 applicable established test performance criteria and measurement instructions. are based on Mini-Circuit’s C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits Notes contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. please Mini-Circuits’ website at specification www.minicircuits.com/MCLStore/terms.jsp B. Electrical specifications andvisit performance data contained in this document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 2 of 2