ACE ACE50141BM+ 250ma cmos low dropout voltage low consumption regulator Datasheet

ACE501
Technology
250mA CMOS Low Dropout Voltage Low consumption Regulator
Description
ACE501 series is a group of positive voltage output, low power consumption, low dropout voltage, three
terminal regulator. It can provide 250mA output current when input / output voltage differential drops to
400mV (Vin=4.0V. Vout=3.0V).The very low power consumption of ACE501 (lq=3.0uA) can greatly
improve natural life of batteries.
ACE501 can provide output value in the range of 1.2V~6.0V in 0.1V steps. It also can customized on
command.
ACE501 includes high accuracy voltage reference, error amplifier, current limit circuit and output driver
module.
ACE501 has well load transient response and good temperature characteristic, which can assure the
stability of chip and power system, And it uses trimming technique to guarantee output voltage accuracy
within ±2%.
ACE501 is available in SOT-89-3. SOT-23-3 package which is lead free. It also can available in these
packages with lead.
Features
•
•
•
•
•
•
•
Low Power Consumption: 1.5uA (Typ)
Maximum Output Current: 250mA
Small Dropout Voltage 170mV@100mA (Vout=3.0V) / 400mV@250mA (Vout=3.0V)
Input Voltage Range: 1.5V~10V
Output Voltage Range: 1.2V~6.0V (customized on command in 0.1V steps)
High Accurate: ±2% (±1% customized)e
Output Current Limit
Application
•
•
•
•
Battery Powered equipment
Power Management of MP3. PDA. DSC. Mouse. PS2 Games
Reference Voltage Source
Regulation after Switching Power
Typical Performance Characteristic:
Output Voltage vs. Output Current (Vout=1.5V)
Output Current (mA)
VER 1.2
1
Technology
ACE501
250mA CMOS Low Dropout Voltage Low consumption Regulator
Absolute Maximum Ratings
Parameter
Symbol
Max
Unit
Input supply voltage
Power Dissipation
SOT-23-3
SOT-89-3
Junction temperature
Storage temperature
Ambient Temperature
VIN
10
V
W
TJ
TS
TA
0.15
0.5
125
- 45 to 150
-40 ~85
O
C
C
O
C
O
Packaging Type
SOT-89-3
SOT-23-3
3
1
Pin
VSS
VIN
VOUT
2
3
SOT-89-3
1
2
3
1
SOT-23-3
1
3
2
2
Function
Ground
Supply Voltage Input
Output Voltage
Ordering information
Selection Guide
ACE501 XX XX + H
Halogen - free
Pb - free
AM : SOT-89-3
BM: SOT-23-3
Output Voltage:
1.2V/2.1V…..6.0V
VER 1.2
2
Technology
ACE501
250mA CMOS Low Dropout Voltage Low consumption Regulator
Block Diagram
Recommended Work Conditions
Item
Input Voltage Range
Ambient Temperature
Min Recommended
-40
Max Unit
8
V
+125 ℃
Electrical Characteristics
(Test Conditions: Cin=1uF, Cout=1uF,TA=25℃, unless otherwise specified.)
ACE501-1.5V
Parameter
Input Voltage
Output Voltage
Maximum Output Current
Input-Output Voltage
Differential
Line Regulation
Symbol
VIN
VOUT
IOUT(Max.)
Dropout
Voltage
ΔVOUT /
ΔVIN‧VOUT
Load Regulation
ΔVOUT
Quiescent Current
Output Voltage Temperature
Coefficient
Iq
ΔVOUT /
ΔT‧VOUT
Conditions
Min
VIN=2.5V, VOUT>1.47
1.47
250
IOUT=100mA
IOUT=40mA
1.6V≦VIN≦8A
VIN=2.5V
1mA≦IOUT≦100mA
VIN=2.5V
IOUT=10mA
Typ Max
8
1.5 1.53
Units
V
V
mA
270
400
mV
0.2
0.3
%/V
20
40
mV
1.5
3.0
uA
50
ppm/℃
VER 1.2
3
ACE501
Technology
ACE501-3.0
Parameter
Input Voltage
Output Voltage
Maximum Output Current
Input-Output Voltage
Differential
Line Regulation
250mA CMOS Low Dropout Voltage Low consumption Regulator
Symbol
VIN
VOUT
IOUT(Max.)
Dropout
Voltage
ΔVOUT /
ΔVIN‧VOUT
Load Regulation
ΔVOUT
Quiescent Current
Output Voltage Temperature
Coefficient
Iq
ΔVOUT /
ΔT‧VOUT
Conditions
VIN=4V, VOUT>2.94
IOUT=100mA
IOUT=200mA
IOUT=40mA
3.2V≦VIN≦8A
VIN=4.0V
1mA≦IOUT≦100mA
VIN=4V
IOUT=10mA
Min
2.94
250
Typ Max
8
3.0 3.06
Units
V
V
mA
170
320
300
500
mV
0.2
0.3
%/V
20
40
mV
1.5
uA
50
ppm/℃
Typical Application Circuit
ACE501
Vin
Vin
Vout
Vout
GND
+
1uF
Cin
+
1uF
Cout
Application hints:
Note 1:Input capacitor (Cin=1uF) is recommended in all application circuit. Tantalum capacitor is recommended.
Note 2:Output capacitor (Cout=1uF) is recommended in all application to assure the stability of circuit. Tantalum
capacitor is recommended.
Explanation:
ACE501 is a series of low dropout voltage and low power consumption three pins regulator. Its
application circuit is very simple, which only needs two outside capacitors. It is composed of these
modules: high accuracy voltage reference, current limit circuit, error amplifier, output driver and power
transistor.
Current Limit module can keep chip and power system away from danger when load current is more
than 250mA.
ACE501 uses trimming technique to assure the accuracy of output value within±2%, at the same time,
temperature compensated is elaborately considered in this chip, which makes ACE501’s temperature
coefficient within 50ppm/℃.
VER 1.2
4
Technology
ACE501
250mA CMOS Low Dropout Voltage Low consumption Regulator
Typical Performance Characteristics
1. Load regulation
2. Line Regulation
3. Dropout Voltage
VER 1.2
5
Technology
4. Input Voltage transient response
(Vout=1.5V, Iout=10mA)
Input Voltage transient response
(Vout=3.0V, Iout=10mA)
5. Load transient response (Vout=1.5V)
ACE501
250mA CMOS Low Dropout Voltage Low consumption Regulator
Input Voltage transient response
(Vout=1.5V, Iout=1mA)
Input Voltage transient response
(Vout=3.0V, Iout=1mA)
Load transient response (Vout=3.0V)
VER 1.2
6
Technology
ACE501
250mA CMOS Low Dropout Voltage Low consumption Regulator
Packing Information
SOT-89-3
VER 1.2
7
Technology
ACE501
250mA CMOS Low Dropout Voltage Low consumption Regulator
Packing Information
SOT-23-3
VER 1.2
8
Technology
ACE501
250mA CMOS Low Dropout Voltage Low consumption Regulator
Notes
ACE does not assume any responsibility for use as critical components in life support devices or systems
without the express written approval of the president and general counsel of ACE Electronics Co., LTD.
As sued herein:
1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and shoes failure to perform when properly used in
accordance with instructions for use provided in the labeling, can be reasonably expected to result in
a significant injury to the user.
2. A critical component is any component of a life support device or system whose failure to perform can
be reasonably expected to cause the failure of the life support device or system, or to affect its safety
or effectiveness.
ACE Technology Co., LTD.
http://www.ace-ele.com/
VER 1.2
9
Similar pages