Revised March 2000 DM74AS1004A Hex Inverting Driver General Description Features These devices contain six independent 2-input drivers, each of which performs the logic invert/complement function. The DM74AS1004A is a driver version of the DM74AS04. Each driver has increased output drive capability to allow the driving of high capacitive loads. ■ Switching specifications at 50 pF ■ Switching specifications guaranteed over full temperature and VCC range ■ Advanced oxide-isolated, ion-implanted Schottky TTL process Ordering Code: Order Number Package Number DM74AS1004AM M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow Package Description DM74AS1004AN N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” tot he ordering code. Connection Diagram Function Table A=Y Input Output A Y L H H L H = HIGH Logic Level L = LOW Logic Level © 2000 Fairchild Semiconductor Corporation DS006338 www.fairchildsemi.com DM74AS1004A Hex Inverting Driver October 1986 DM74AS1004A Absolute Maximum Ratings(Note 1) Supply Voltage 7V Input Voltage 7V 0°C to +70°C Operating Free Air Temperature Range Note 1: The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. −65°C to +150°C Storage Temperature Range Typical θJA N Package 76.0°C/W M Package 106.0°C/W Recommended Operating Conditions Symbol Parameter Min Nom Max Units 4.5 5 5.5 V VCC Supply Voltage VIH HIGH Level Input Voltage VIL LOW Level Input Voltage 0.8 V IOH HIGH Level Output Current −48 mA IOL LOW Level Output Current 48 mA TA Free Air Operating Temperature 70 °C 2 V 0 Electrical Characteristics over recommended operating free air temperature range. All typical values are measured at VCC = 5V, TA = 25°C. Symbol Parameter Conditions VIK Input Clamp Voltage VCC = 4.5V, II = −18 mA VOH HIGH Level IOH = −2 mA, VCC = 4.5V to 5.5V Min 2.4 IOH = Max, VCC = 4.5V VOL LOW Level VCC = 4.5V, Output Voltage IOL = Max Max Units −1.2 V VCC − 2 IOH = −3 mA, VCC = 4.5V Output Voltage Typ 3.2 V 2 0.35 0.5 V 0.1 mA II Input Current @ Max Input Voltage VCC = 5.5V, VIH = 7V IIH HIGH Level Input Current VCC = 5.5V, VIH = 2.7V 20 µA IIL LOW Level Input Current VCC = 5.5V, VIL = 0.4V −0.5 mA IO Output Drive Current VCC = 5.5V, VO = 2.25V mA ICC Supply Current VCC = 5.5V −135 −200 Outputs HIGH −50 3.2 5 mA Outputs LOW 16 27 mA Switching Characteristics over recommended operating free air temperature range Symbol tPLH tPHL Parameter Conditions Propagation Delay Time VCC = 4.5V to 5.5V LOW-to-HIGH Level Output RL = 500Ω Propagation Delay Time CL = 50 pF HIGH-to-LOW Level Output www.fairchildsemi.com 2 Min Max Units 1 4 ns 1 4 ns DM74AS1004A Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow Package Number M14A 3 www.fairchildsemi.com DM74AS1004A Hex Inverting Driver Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Package Number N14A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 4