Designed and Manufactured in Germany Specification Oscillator type: Rev.: 1 Date: 2016-08-19 AXPLT2500 SHF Low Noise Phase-Locked Crystal Oscillator (PLXO) with internal TCXO reference Parameter Reference frequency (input) fREF Output frequency fOUT Frequency stability (free running) frequency tolerance vs. operating temperature range vs. supply voltage variation (pushing) vs. load change (pulling) Long term (aging) per year Reference input Frequency accuracy Signal waveform Input level Input impedance RF output Signal waveform Load RL Output level Harmonics Sub-harmonics Spurious PLL Products Phase noise (Note 4) min. 10 3 Enclosure (see drawing) (LxWxH) Weight Packing Notes: 1. 2. 3. 4. max. Unit Condition 150 12 MHz GHz Multiplication (Note 2) ±1 ±1 ±0.1 ±0.1 ±1 ppm ppm ppm ppm ppm VS ±5% RL ±5% after 30 days operation ±10 ppm +13 dBm Ω (Note 3) Sine wave +3 50 +10 Sine wave 50 +13 -30 -40 -80 -60 Lock detect (LD) output Supply voltage VS Current consumption Operating temperature range typ. 2.3 11.4 -100 -120 0 3.3 12.0 250 -20 -110 1.0 12.6 350 +70 50.0x50.0x21.0 max. 60 Palette Ω dBm dBc dBc dBc dBc dBc/Hz dBc/Hz V V V mA °C ±5% @ 10 kHz @ 100 kHz Out of lock Locked mm g Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated Frequency multiplication factor N depends on output frequency fOUT Internal TCXO reference is switched-on at reference input levels below the minimum limit For other phase noise please consult factory Absolute Maximum Ratings Parameter min. max. Unit Condition Supply Voltage VS Reference Input Level Storage Temperature -0.5 -55 VS + 10% +15 +105 V dBm °C VS to GND GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXPLT2500 Rev.1 Drawing D0 Page 1(3) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Ordering Code Input Output Frequency [MHz] Frequency [GHz] AXPLT2500 100.000 6.500 Example: AXPLT2500-100.000-6.500_Rev.1 Model Revision Rev.1 Enclosure drawing Pin connections: Pin # Symbol 1 VS 2 GND 3 LD SMA1 RF OUT SMA2 FREF Function Supply Voltage Ground Lock Detect Output RF Output Reference Frequency Input GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXPLT2500 Rev.1 Drawing D0 Page 2(3) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Handling and Testing Parameter Procedure Handling and Testing Processing Source Application Note AXAN-011 Application Note AXAN-012 Parameter Procedure Electrostatic discharge (ESD) THD devices SMD devices Washable RoHS- Compliant IEC60749-26 IEC60749-27 Yes Yes www.axtal.com www.axtal.com Condition HBM MM No No 2000 V 200 V Environmental conditions Test Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* IEC 60068 Part … 2-17 IEC 60679-1 Clause 5.6.2 MIL-STD202G Method 112E 2-20 2-58 5.6.3 208H 210F 2-27 5.6.8 213B Vibration, 2-6 5.6.7.1 201A sinusoidal* 204D Vibration, 2-64 5.6.7.3 214A random* Endurance tests 108A - ageing 5.7.1 - extended aging 5.7.2 Other environmental conditions on request MIL-STD810F Method MIL-PRF55310D Clause 3.6.1.2 3.6.52 3.6.48 516.4 3.6.40 516.4-4 3.6.38.1 3.6.38.2 3.6.38.3 3.6.38.4 514.5 4.8.35 Test conditions (IEC) Gross leak: Test Qc, Fine leak: Test Qk Test Ta Method 1 Test Td1 Method 2 Test Td2 Method 2 Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Test Fdb 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C Data sheet is for information purposes only and may be subject to modifications or may be discontinued without notice. Revision History Rev. Drawing Date [dd.mm.yyyy] 1 1 1 1 1 D0 D1 D2 D0 D0 21.09.2015 01.02.2016 10.05.2016 16.06.2016 19.08.2016 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Remarks First issue PLL Spurious added Typical phase noise at 10 kHz added Model name changed from AXPLO2000 to AXPLO2500 Model name with TCXO reference changed to AXPLT2500 AXPLT2500 Rev.1 Drawing D0 Page 3(3) Author Checked HH HH HH HH HH HH HH HH HH HH www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected]