Vishay BAV100 Small signal switching diodes, high voltage Datasheet

BAV100, BAV101, BAV102, BAV103
www.vishay.com
Vishay Semiconductors
Small Signal Switching Diodes, High Voltage
FEATURES
• Silicon epitaxial planar diode
• AEC-Q101 qualified
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
• General purposes
MECHANICAL DATA
Case: MiniMELF SOD-80
Weight: approx. 31 mg
Cathode band color: black
Packaging codes/options:
GS18/10K per 13" reel (8 mm tape), 10K/box
GS08/2.5K per 7" reel (8 mm tape), 12.5K/box
PARTS TABLE
TYPE
DIFFERENTIATION
ORDERING CODE
TYPE
MARKING
INTERNAL CONSTRUCTION
REMARKS
BAV100
VRRM = 60 V
BAV100-GS18 or BAV100-GS08
-
Single diode
Tape and reel
BAV101
VRRM = 120 V
BAV101-GS18 or BAV101-GS08
-
Single diode
Tape and reel
BAV102
VRRM = 200 V
BAV102-GS18 or BAV102-GS08
-
Single diode
Tape and reel
BAV103
VRRM = 250 V
BAV103-GS18 or BAV103-GS08
-
Single diode
Tape and reel
PART
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
Repetitive peak reverse voltage
Reverse voltage
Peak forward surge current
Repetitive peak forward current
Forward continuous current
Power dissipation
Rev. 1.7, 31-Jul-12
tp = 1 μs
PART
SYMBOL
VALUE
UNIT
BAV100
BAV101
VRRM
60
V
VRRM
120
V
BAV102
VRRM
200
V
BAV103
VRRM
250
V
BAV100
VR
50
V
BAV101
VR
100
V
BAV102
VR
150
V
BAV103
VR
200
V
IFSM
1
A
IFRM
625
mA
IF
250
mA
Ptot
500
mW
Document Number: 85542
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BAV100, BAV101, BAV102, BAV103
www.vishay.com
Vishay Semiconductors
THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
RthJL
350
K/W
RthJA
500
K/W
Tj
175
°C
Tstg
- 65 to + 175
°C
Thermal resistance junction to lead
Thermal resistance junction to ambient air
On PC board
50 mm x 50 mm x 1.6 mm
Junction temperature
Storage temperature range
ELECTRICAL
PARAMETER
TEST CONDITION
Forward voltage
PART
IF = 100 mA
Reverse current
Breakdown voltage
Differential forward current
Reverse recovery time
MAX.
UNIT
VF
MIN.
TYP.
1000
mV
VR = 50 V
BAV100
IR
100
nA
VR = 100 V
BAV101
IR
100
nA
VR = 150 V
BAV102
IR
100
nA
VR = 200 V
BAV103
IR
100
nA
Tj = 100 °C, VR = 50 V
BAV100
IR
15
μA
Tj = 100 °C, VR = 100 V
BAV101
IR
15
μA
Tj = 100 °C, VR = 150 V
BAV102
IR
15
μA
Tj = 100 °C, VR = 200 V
BAV103
IR
15
μA
IR = 100 μA, tp/T = 0.01,
tp = 0.3 ms
BAV100
V(BR)
60
V
IR = 100 μA, tp/T = 0.01,
tp = 0.3 ms
BAV101
V(BR)
120
V
BAV102
V(BR)
200
V
BAV103
V(BR)
250
V
IR = 100 μA, tp/T = 0.01,
tp = 0.3 ms
Diode capacitance
SYMBOL
VR = 0 V, f = 1 MHz,
VHF = 50 mV
CD
1.5
pF
IF = 10 mA
rf
5

IF = IR = 30 mA,
iR = 3 mA, RL = 100 
trr
50
ns
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
1000
100
I F - Forward Current (mA)
I R - Reverse Current (µA)
1000
Scattering Limit
10
1
VR = VRRM
0.1
0.01
Tj = 25 °C
100
Scattering Limit
10
1
0.1
0
94 9084
40
80
120
160
200
Tj - Junction Temperature (°C)
Fig. 1 - Reverse Current vs. Junction Temperature
Rev. 1.7, 31-Jul-12
0
94 9085
0.4
0.8
1.2
1.6
2.0
V F - Forward Voltage (V)
Fig. 2 - Forward Current vs. Forward Voltage
Document Number: 85542
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BAV100, BAV101, BAV102, BAV103
rf - Differential Forward Resistance (Ω)
www.vishay.com
Vishay Semiconductors
1000
100
Tj = 25 °C
10
1
0.1
1
100
10
I F - Forward Current (mA)
94 9089
Fig. 3 - Differential Forward Resistance vs. Forward Current
PACKAGE DIMENSIONS in millimeters (inches): MiniMELF SOD-80
1.6 (0.063)
1.4 (0.055)
Cathode indification
*
0.47 (0.019) max.
3.7 (0.146)
3.3 (0.130)
* The gap between plug and glass can
be either on cathode or anode side
2.5 (0.098) max.
1.25 (0.49) min.
2 (0.079) min.
Foot print recommendation:
Document no.:6.560-5005.01-4
Rev. 8 - Date: 07.June.2006
5 (0.197) ref.
96 12070
Rev. 1.7, 31-Jul-12
Document Number: 85542
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1
Document Number: 91000
Similar pages