LUPA 1300-2 500 FPS High Speed CMOS Sensor Features CYIL2SM1300AA Product Brief a wide range of operating modes and features an LVDS interface for easy system integration. By removing the visually highly disturbing column patterned noise, this sensor allows building a camera without having to perform any off-line correction or the need for any memory making this sensor highly suitable for lower cost applications. Moreover, since the on-chip column FPN correction is more reliable than an off-line correction as it is intrinsically compensated for supply and temperature variations, this sensor also allows to build reliable high-end camera's without having to worry about column FPN appearing in environments with highly varying ambient temperatures. ■ 1280 x 1024 active pixels ■ 14 µm X 14 µm square pixels ■ 1" optical format ■ Monochrome or color digital output ■ 500 fps frame rate ■ On-chip 10-bit ADCs ■ 12 LVDS serial outputs ■ Random programmable ROI readout ■ Pipelined, Triggered and Snapshot shutter ■ On-chip column FPN correction ■ Serial to Parallel Interface (SPI) ■ Limited supplies: Nominal 2.5V (some supplies require 3.3V) ■ 0°C to 70°C operational temperature range ■ 168-pin uPGA package ■ Power dissipation: 1.2W The sensor requires only one master clock for operation up to 500 fps. It is housed in a 168-pin ceramic µPGA package. The LUPA 1300-2 is available in a monochrome version or Bayer (RGB) patterned color filter array and is available with and without glass. LUPA 1300-2 Die Photo Applications ■ High speed machine vision ■ Motion analysis ■ Intelligent traffic system ■ Medical imaging ■ Industrial imaging Description The LUPA 1300-2 is a highly integrated SXGA high speed, high sensitivity CMOS image sensor targeted at various high speed machine vision and industrial monitoring applications. The sensor runs at 500fps and features triggered and pipelined shutter modes. The sensor packs 24 parallel 10-bit A/D converters with an aggregate conversion rate of 740 MSPS. On-chip digital column FPN correction allows the sensor to output ready-to-use image data for all but the most demanding applications. In order to allow simple and reliable system integration, the 13 channel 8 Gbps LVDS serial link protocol supports per channel skew correction and serial link integrity monitoring. Peak responsivity of the 14x14um 6T pixel is 7350 V.m2/W.s. Dynamic range is measured to be 57dB. In full frame video mode, the sensor consumes 1.2W from a 2.5V power supply. The sensors integrates A/D conversion, on-chip timing for Cypress Semiconductor Corporation Document Number: 001-49820 Rev. ** • Ordering Information Marketing Part Number (ES Samples) CYIL2SM1300AA-GDCES Mono/Color mono with glass CYIL2SM1300AA-GWCES mono without glass CYIL2SC1300AA-GDCES color with glass CYIL2SC1300AA-GWCES color without glass 198 Champion Court • Package 168 pin ceramic uPGA San Jose, CA 95134-1709 • 408-943-2600 Revised October 29, 2008 LUPA 1300-2 General Specifications Parameter Electro-Optical Specifications Specifications Active Pixels Parameter Value 1280 (H) x 1024 (V) Conversion gain 34uV/e Pixel Size 14 µm x 14 µm Full well charge 30000e Pixel Type Pipelined shutter pixel Responsivity 7350 V.m2/W.s @680nm Pixel Rate 620 Mbps per channel (12 serial LVDS outputs) Fill factor 40% Parasitic light sensitivity < 1/10000 Shutter Type Pipelined and Triggered Global Shutter Dark noise 37e- Frame Rate 500 fps at 1.3 Mpixel (can be boosted by subsampling and windowing). QE x FF 35% @ 680nm FPN 2% of Vsat PRNU <1% of Vsignal 315Mhz for 500 fps Dark signal 170mV/s @ 30°C Windowing (ROI) Randomly programmable ROI read out up to four multiple windows Power dissipation 1.2W Read Out Windowed, flipped, mirrored, and subsampled read out possible ADC Resolution 10 bit, on-chip Sensitivity 10.16 V/lux.s @ 550nm Extended Dynamic Range Multiple slope (up to 90 dB optical dynamic range) Master Clock Document History Page Document Title: LUPA 1300-2, 500 FPS High Speed Image Sensor Document Number: REV ECN Orig. of Change Submission Date ** 2598181 VED October 29, 2008 Description Of Change New image sensor document Sales, Solutions, and Legal Information Worldwide Sales and Design Support Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives, and distributors. For more information on Image sensors, please contact at [email protected]. Cypress offers standard and customized CMOS image sensors for consumer as well as industrial and professional applications. Consumer applications include the fast growing high volume cell phone, digital still cameras as well as automotive applications. Cypress' customized CMOS image sensors are characterized by very high pixel counts, large area, very high frame rates, large dynamic range, and high sensitivity. © Cypress Semiconductor Corporation, 2008. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Any Source Code (software and/or firmware) is owned by Cypress Semiconductor Corporation (Cypress) and is protected by and subject to worldwide patent protection (United States and foreign), United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without the express written permission of Cypress. Disclaimer: CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Use may be limited by and subject to the applicable Cypress software license agreement. Document Number: 001-49820 Rev. ** Revised October 29, 2008 All products and company names mentioned in this document may be the trademarks of their respective holders. Page 2 of 2