Coilcraft CP312FRA251MAZ Common mode chokes for critical application Datasheet

0603 COMMON MODE CHOKES
Common Mode Chokes for Critical Applications
• Designed for high-speed USB 3.0, HDMI, SATA, IEEE1394
and LVDS applications.
• Supports data rates up to 4.8 Gbit/s.
• Miniature EIA 0603 footprint; only 1.17 mm tall
• Most values provide >15 dB common mode attenuation and
>100 ohms impedance.
Core material Ferrite
Terminations Gold over nickel over silver-palladium-glass frit. Other
terminations available at additional cost
Weight 4.9 – 5.2 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+105°C with derated current
Storage temperature Component: –55°C to +105°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging 2000 per 7″reel; Plastic tape: 8 mm wide, 0.23 mm thick,
4 mm pocket spacing, 1.14 mm pocket depth
Common mode Common mode
impedance typ (Ohms)attenuation typ (dB)
Part number1
100 MHz 500 MHz 1 GHz
100 MHz 500 MHz 1 GHz
CP312FRA251MAZ
CP312FRA601MAZ
CP312FRA951MAZ
CP312FRA142MAZ
CP312FRA222MAZ
25
60
95
145
225
44
99
156
242
384
64
142
234
353
592
1.31
3.00
4.62
6.85
9.14
3.16
6.88
9.75
12.80
16.53
1. When ordering, please specify termination and testing codes:
CP312FRA222MAZ
Termination: A = RoHS compliant gold over nickel over silver-palladiumglass frit
Special order:
C = Tin-lead over gold over nickel over silver-palladiumglass frit
F = Tin-silver-copper over gold over nickel over silverpalladium-glass frit
Testing:
Z = COTS
H = Screening per Coilcraft CP-SA-10001
2. Inductance measured at 100 MHz using an Agilent/HP 4286A impedance analyzer and a Coilcraft SMD-A fixture.
3. DCR is specified per winding.
4. Current per winding that causes a 20°C rise from 25°C ambient.
5. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Inductance2 DCR max3 Isolation Irms4
min (nH)
(Ohms)
(Vrms) (mA)
8.45
13.27
16.06
18.16
20.29
18
37
63
98
150
0.069
max
1,75
0.046 max
1,17
250
250
250
250
250
500
500
500
500
500
1
2
4
3
0.004
0,10
0.013 0.034
0,86
0,33
1
0.023
0,58
0.030
0,73
2
1
3
4
0.010
0,25
2
0.040 max
1,02
4
3
0.010
0,25
inches
Dimensions are in
mm
Suggested
Land Pattern
0.012
0,30
Document CP406-1 Revised 07/11/12
®
© Coilcraft, Inc. 2012
0.077
0.109
0.142
0.174
0.209
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
Fax 847-639-1508
Email [email protected]
www.coilcraft-cps.com
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.
Document 406-2
0603 Common Mode Choke — CP312FRA
Typical differential mode attenuation (Ref: 50 Ohms)
0
Attenuation (dB)
1
2
3
-251
-601
-951
-142
-222
4
5
6
1
10
100
1000
10000
Frequency (MHz)
Typical common mode attenuation (Ref: 50 Ohms)
0
Attenuation (dB)
5
10
-251
-601
-951
-142
-222
15
20
25
30
1
10
100
1000
10000
Frequency (MHz)
Typical impedance vs frequency
1000
-222
-142
-951
-601
Impedance (Ohms)
100
-251
10
1
0.1
1
10
100
1000
10000
Frequency (MHz)
Document CP406-2 Revised 07/11/12
®
© Coilcraft, Inc. 2012
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
Fax 847-639-1508
Email [email protected]
www.coilcraft-cps.com
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.
Similar pages