SHF–110–01–L–D–RA EHF–108–01–F–D–SM–LC F-213-1 EHF–105–01–F–D–SM ESHF–125–01–L–D–SM–LC (1,27 mm) .050" ESHF–105–01–L–D–SM EHF–125–01–L–D–SM–LC SHF, ESHF, EHF, ECF SERIES SHROUDED & EJECTOR IDC HEADER SHF, ESHF Mates with: FFSD, FFTP (SHF) TYPE STRIP EHF Mates with: FFSD*, FFTP NO. PINS PER ROW 1 PLATING OPTION 01 TAIL STYLE D SPECIFICATIONS For complete specifications see www.samtec.com?SHF, www.samtec.com?ESHF or www.samtec.com?EHF SHF = Mates with FFSD without Strain Relief Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Sn or Au over 50µ" (1,27 µm) Ni Current Rating: 1.75A per contact @ 80°C ambient Operating Temp Range: -55°C to +125°C RoHS Compliant: Yes –RA (Call Samtec for other sizes) ESHF (1,27) .050 TYP = Mates with FFSD with Strain Relief TYPE STRIP –TR = Surface Mount (6,35) .250 = Tape & Reel Packaging No. of pins x ESHF (1,27) .050 + (10,16) .400 01 03 –RA –TH (5,46) .215 (1,91) .075 –TH EHF NO. PINS PER ROW –SM 01 PLATING OPTION EJECTOR HEADER CAP (Locks FFSD cable to EHF header) (8,76) .345 04, 05, 06, 08, 10, 11, 12, 13, 15, 17, 20, 25 Leave blank for ThroughHole version –F (Call Samtec for other sizes) –SM –L 02 = 10µ" (0,25 µm) Gold on post, Matte Tin on tail No. of positions x (1,27) .050 + (18,03) .710 NO. PINS PER ROW 05, 08, 10, 13, 17, 20, 25 TAIL OPTION = Gold flash on post, Matte Tin on tail No. of positions x (1,27) .050 + (14,48) .570 (9,65) .380 –RA D (0,41) .016 SQ (11,30) .445 (8,26) .325 (3,05) .120 No. of positions x (1,27) .050 + (7,37) .290 –RA (8,51) .335 WWW.SAMTEC.COM –TH (2,72) .107 (1,27) .050 –K = (7,50 mm) .295" DIA Polyimide Film Pick & Place Pad –P –SM (7,52) .296 (1,52) .060 –“XX” = Polarized Position (–RA not available) –LC = Pick & Place Pad (–SM only) (6,67) (2,29) .263 .090 *Important Note: EHF will not mate to FFSD with strain relief (-SR option), see ESHF series. OTHER OPTION = Locking Clip (–SM only) (Manual placement required) = Right Angle (3,05) .120 –TH –RA (1,27) .050 = Surface Mount 01 (1,27) .050 –SM = (6,50 mm) .256" DIA Polyimide Film Pick & Place Pad (–SM only) (1,27) .050 (5,85) .230 (0,41) .016 SQ 1 –K (1,89) .075 –SM (5,33) .210 Lead–Free Solderable: Yes SMT Lead Coplanarity: (0,10 mm) .004" max Note: Some lengths, styles and options are non-standard, non-returnable. –SM SHF (1,27) .050 + Processing: ECF = Right Angle A No. of pins x 02 04 = Locking Clip (Not available with –RA) (Manual placement required) = Throughhole = 10µ" (0,25 µm) Gold on post, Matte Tin on tail A –LC –TH –L 04, 05, 06, 08, 10, 11, 12, 13, 15, 17, 20, 25 OTHER OPTION –TR (1,27) .050 –RA = Tape & Reel Packaging (–LC not available)