Locks, Lockouts, Latches, Handles and Clamps Locks Accessories Locks, Lockouts, Latches, Handles and Clamps Locks Spec-00479 G 763.422.2211 763.422.2600 Lock Kit for Clamp Cover Junction Boxes L (in.) 1.25 Catalog Number ACLJIC L (mm) 32 Designed for field installation in standard clamp-cover junction boxes. Includes complete installation instructions. One hole must be drilled or punched in the cover to receive the cylinder lock. Punches for Hoffman locks and latches are available from Greenlee Punches. For more information on Greenlee punches, go to http:// www.greenlee.textron.com/ Bulletin: A80 Lock Kit for Type 3R and 12 Enclosures Catalog Number ACLSN12 L, for NEMA 12 Enclosure in./mm 1.69 43 L, for Medium 3R Hinged-Cover Enclosure in./mm 2.25 57 Designed for field installation in standard one-door Type 3R and 12 enclosures. Includes complete installation instructions. One hole must be drilled or punched in the door to receive the cylinder lock. Bulletin: A80 Padlock Kit for Junction Boxes Designed for field installation on standard LP, CH and CHNF junction boxes. Maintains water-tight and dust-tight seal. To install simply drill two holes in the cover and two holes in the body. Includes complete instructions. Padlock Kit is plated steel or Type 316 stainless steel. Catalog Number APLKJIC APLKJIC6SS Description Plated steel Type 316 stainless steel Bulletin: A80 Replacement Keys Fits PROLINE™ Network Cabinet and Networking Wall-Mount Cabinet. Bulletin: DACCY 1 Accessories Catalog Number E2233KEY E333KEY SUBJECT TO CHANGE WITHOUT NOTICE Key Code 2233 333 Includes 2 Keys 2 Keys Use with PROLINE™ , Net Series, PC Cabinet, SOHO ACCESSPLUS™ II, L-BOX™ , D-BOX™ EQUIPMENT PROTECTION SOLUTIONS Spec-00479 G Locks, Lockouts, Latches, Handles and Clamps Lockouts Safety Lockouts Lockouts Provide a means of using multiple padlocks on a secured power source. Catalog number ASL6C includes a 10.00-in. (254-mm) plated steel chain. Manufactured from 10 gauge steel with six station holes. Red finish. Overall length is 5.06 in. (128 mm) and padlock holes are .38in. (10-mm) in diameter. Catalog Number ASL6 ASL6C Description Without chain With chain Catalog Number ASLDA ASLDAC Description Without chain With chain Bulletin: A80 Dual-Access Safety Lockouts Provide a means of using two padlocks on a secured power source. Either padlock can be removed enabling power to be interrupted and enclosure accessed. Catalog number ASLDAC includes a 10.00-in. (254-mm) plated steel chain. Lockouts are manufactured from 10 gauge steel and finished in red. Padlock holes are .38-in. (10-mm) in diameter. Padlock is not included. Bulletin: A80 EQUIPMENT PROTECTION SOLUTIONS Spec-00479 G PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM Accessories 2 Locks, Lockouts, Latches, Handles and Clamps Latches T-Handle Latch and Keyed Cylinder Lock Kits Latches To install, simply remove the standard slotted latch and insert the kit. Complete installation instructions are furnished. Catalog number AL7A includes a Type L7 T handle and all hardware. Catalog number AL12AR includes a Type L12 cylinder lock, cam and all hardware. Latch and lock fit Type 1 enclosures and hinged-cover pull boxes. Catalog Number AL7A AL12AR Description T handle latch kit Cylinder lock kit Bulletin: A80 Latch Kit for One-Door Type 12 Enclosures Designed for field installation on most standard one-door Type 12 enclosures. These latch kits will not fit Hoffman disconnect, CONCEPT™ or PROLINE™ enclosures. Each kit includes a handle, latch, latch rods, adjustable rod guides and all hardware. The latch rods can be adjusted to maintain the proper gasket compression by relocating the pins in the rod guides. When the pin is removed, the latch rod can also be removed. These kits are available with a key locking handle, a non-locking handle or a padlocking handle. All openings through the door are gasketed to assure a complete seal. Ends of latch rods have rollers for easier door closing. Bulletin: A80 Catalog Number AL36A Handle Type Padlock AL2A AL2ACCW AL3A AL36BR Keylock Keylock NonLocking Padlock AL2BR Keylock Either Clockwise or Counterclockwise Clockwise AL2BCCW Keylock Counterclockwise AL3BR NonLocking Padlock Clockwise AL36CR AL2CR AL2CCCW AL3CR AL36DR AL2DR AL2DCCW AL3DR Keylock Keylock NonLocking Padlock Keylock Keylock NonLocking Opens Either Clockwise or Counterclockwise Clockwise Counterclockwise Clockwise Either Clockwise or Counterclockwise Clockwise Counterclockwise Clockwise Either Clockwise or Counterclockwise Clockwise Counterclockwise Clockwise Description 1-point Latch kit 1-point Latch kit 1-point Latch kit 1-point Latch kit 3-point Latch Kit where A is 16, 20, 24 or 30 in. 3-point Latch Kit where A is 16, 20, 24 or 30 in. 3-point Latch Kit where A is 16, 20, 24 or 30 in. 3-point Latch Kit where A is 16, 20, 24 or 30 in. 3-point Latch kit where A is 36, 42 or 48 in. 3-point Latch kit where A is 36, 42 or 48 in. 3-point Latch kit where A is 36, 42 or 48 in. 3-point Latch kit where A is 36, 42 or 48 in. 3-point Latch kit where A is 60 or 72 in. 3-point Latch kit where A is 60 or 72 in. 3-point Latch kit where A is 60 or 72 in. 3-point Latch kit where A is 60 or 72 in. See price list for factory installation charges. A is enclosure height. Latch Kits for Type 4 and 12 Enclosures Fits Type 4 and 12 enclosures which have external screw clamps. Requires only a quarter-turn (90 degrees) to open or close. An internal O-ring and external gasket assure a water-tight and dusttight seal. Installation requires a hole punched or drilled in the door for each latch. Complete instructions are furnished. A square or triangular key is required for tamper-resistant latches. Latch is die-cast zinc with chrome finish. Bulletin: A80 Catalog Number AL31 AL32 AL32Y AL35 AL35Y Description Slotted insert 7-mm square insert Key for AL32 7-mm triangle insert Key for AL 35 Toggle Latch for Type 4 and 4X Floor-Mount and Free-Stand Enclosures Provides quick access to Type 4 and 4X floor-mount and freestand enclosures with clamps. The 3/8-16 threaded, stainless steel toggle latches replace the standard stainless steel bolts. Operation of the toggle releases the door clamp so the door can be opened without tools. Two Type 316 stainless steel toggle assemblies included. Catalog Number AFT44XSS Description 2 toggle latches Bulletin: A80 3 Accessories SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION SOLUTIONS Spec-00479 G Locks, Lockouts, Latches, Handles and Clamps Handles POWERGLIDE™ Handles Handles Easy-to-install medium-size POWERGLIDE Handles fit into existing handle holes. They are available in clockwise and counterclockwise non-defeater models and a clockwise defeater model. The clockwise defeater model includes door hardware for Bulletin A25 enclosures. Catalog Number AL55CW AL55CCW AL55CWD Description Medium POWERGLIDE Handle - Clockwise Opening Medium POWERGLIDE Handle - Counter-Clockwise Opening Medium POWERGLIDE Handle - Clockwise Opening with Defeater and Door Hardware Catalog Number DHDLK Description Handle kit Bulletin: A80 Handle Kit Non-metallic handle for small enclosures. Includes four rubber bumpers that mount on back of enclosure to protect exterior finish. All mounting hardware and complete installation instructions are provided. Bulletin: A80 Handles Attach to sides of enclosure to provide maximum operator control when using a pendant arm, swivel or swivel tilt. Bulletin: C2, CC1, CC2, DEC1, P1 Catalog Number ERCFH3U ERCFH4U ERCFH6U PUHKA PUHK Locking T Handle Description 132 mm 177 mm 266 mm 248 mm 9.75 in. Fits Desktop case Desktop case Desktop case PROLINE sloped fronts PROLINE sloped fronts Optional locking T-Handle available for replacement of the quarterturn latch (order separately). Bulletin: T90R3 Catalog Number ALTC3R EQUIPMENT PROTECTION SOLUTIONS Spec-00479 G PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM Description Available for replacement of the quarter-turn latch Accessories 4 Locks, Lockouts, Latches, Handles and Clamps Clamps Fast-Operating Clamp-Cover Junction Box Clamp Clamps Provides quick access to enclosure or wireway interiors. Installs on standard clamp bracket used on Hoffman junction boxes, Type 12 trough and wireway, Type 4X wireway and similar custom enclosures. Clamps are available in plated steel or stainless steel. Catalog Number AL23 AL23SS Description Plated steel clamp Stainless steel clamp Catalog Number AFC412SS Qty. 2 Bulletin: A80 Fast-Operating Clamp Assembly Provides quick access to enclosures which have screw clamps. Install on clamp brackets used on single-door Type 4, 4X, 12 and 13 enclosures and similar custom order enclosures. The entire clamp assembly is Type 316 stainless steel. Bulletin: A80 Clamp Kits These kits provide replacement clamps for clamp-cover junction boxes and wall-mount enclosures. Each kit contains two clamps and all mounting hardware. Bulletin: A80 Clamp Block Kit Used on floor-mount and free-stand Type 4X stainless steel enclosures with clamps. Kit includes two sets of screws, two Type 316L clamp blocks and mounting hardware. Catalog Number AL15 AL16 AL17 AL18 Catalog Number ACBK6SS Material Mild Steel Stainless Steel Mild Steel Stainless Steel Use with A12 enclosures A4, A4S enclosures A51 junction boxes A51S junction boxes Description 2 clamp blocks and screw sets Bulletin: A50Y 5 Accessories SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION SOLUTIONS Spec-00479 G Locks, Lockouts, Latches, Handles and Clamps Clamps Notes EQUIPMENT PROTECTION SOLUTIONS Spec-00479 G PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM Accessories 6