March 6, 2007 SMD INDUCTOR DR353-1 SERIES Features z z z z z Low Profile Surface Mount Design Flat Top for Pick and Place Inductance Range from 0.1µH to 560.0µH Operating Temp. -25°C to + 85°C Tinned Leads with Leaded Solder is Available (note 6) ELECTRICAL SPECIFICATIONS AT 25ºC Part No. Inductance (µH) DR353-1-101 DR353-1-181 DR353-1-271 DR353-1-391 DR353-1-561 DR353-1-681 DR353-1-821 DR353-1-102 DR353-1-122 DR353-1-152 DR353-1-182 DR353-1-222 DR353-1-272 DR353-1-332 DR353-1-392 DR353-1-472 DR353-1-562 DR353-1-682 DR353-1-822 DR353-1-103 DR353-1-123 DR353-1-153 DR353-1-183 DR353-1-223 DR353-1-273 DR353-1-333 DR353-1-393 DR353-1-473 DR353-1-563 DR353-1-683 DR353-1-823 DR353-1-104 DR353-1-124 DR353-1-154 DR353-1-184 DR353-1-224 DR353-1-274 DR353-1-334 DR353-1-394 DR353-1-474 DR353-1-564 DATATRONIC: 0.10±20% 0.18±20% 0.27±20% 0.39±20% 0.56±20% 0.68±20% 0.82±20% 1.0±20% 1.2±20% 1.5±20% 1.8±20% 2.2±20% 2.7±20% 3.3±20% 3.9±20% 4.7±20% 5.6±20% 6.8±20% 8.2±20% 10±10% 12±10% 15±10% 18±10% 22±10% 27±10% 33±10% 39±10% 47±10% 56±10% 68±10% 82±10% 100±10% 120±10% 150±10% 180±10% 220±10% 270±10% 330±10% 390±10% 470±10% 560±10% @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1kHz @1kHz DCR (Ω) Max. 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.50 0.60 0.60 0.70 0.80 0.90 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.5 2.8 3.1 3.5 3.9 4.3 4.9 5.5 6.2 7.0 8.0 9.3 10.2 11.8 12.5 13.0 22.0 25.0 28.0 20 20 25 25 30 30 30 20 20 20 20 20 20 20 20 20 20 20 20 35 35 35 35 35 35 40 40 40 40 40 40 40 40 40 40 40 40 40 50 50 50 Q Min. @25.2 MHz @25.2 MHz @25.2 MHz @25.2 MHz @25.2 MHz @25.2 MHz @25.2 MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @796kHz @796kHz @796kHz @796kHz @796kHz @796kHz @796kHz @796kHz @796kHz @796kHz I rated (mA) Max. 700 650 600 530 530 470 450 445 425 400 390 370 320 300 290 270 250 240 225 190 180 170 165 150 125 115 110 100 85 80 70 80 75 70 65 65 65 65 50 45 40 SRF (MHz) Min. 200 200 200 200 160 160 120 100 100 75 60 50 43 38 35 31 28 25 23 20 18 16 15 14 13 12 11 11 10 9 8.5 8 7.5 7 6 5.5 5 5 5 5 5 28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice. March 6, 2007 MECHANICAL OUTLINES 3.2 0.3 1.5 1.0 1.5 353-1 XXX 2.0 TOP VIEW PCB SOLDER PAD LAYOUT (REF.) 2.0 0.3 1 FRONT VIEW 0.7 Min. 0.7 Min. 0.7 Min. 2 SCHEMATIC 2.5 0.2 BOTTOM VIEW Notes: 1. All dimensions are shown in millimeter “mm” 2. General tolerance ±0.2mm, unless other specified 3. Irated for an approximate 40°C temperature rise 4. Irated for an approximate 20% drop maximum of the initial value 5. Tape and reel quantity, 2000 pcs/reel 6. For non-RoHS parts replace DR prefix with 42- (e.g. DR353-1 becomes 42-353-1) 7. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020C DATATRONIC: 28151 Highway 74, Romoland, CA 92585 Tel: 909-928-7700 Toll Free Tel: 888-889-5391 Fax: 909-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change withour notice.