Ecliptek ECFT-S-30.000M-LTR Crystal Datasheet

Marketing Bulletin
DATE:
May 1st, 2008
TO:
All Sales Personnel
FROM:
Isaac Gonzalez
RE:
Product Termination
To all concerned parties,
This bulletin is to notify all customers of the discontinuation of the following Ecliptek
series effective May 1st, 2008:
Series
EC
Description
Resistance Welded HC-49/U Crystal
Recommended Replacement
EU Series
In compliance with our End of Life (EOL) policy, this will serve as advanced notice of
product termination. New orders will not be accepted after September 1st, 2009, with
delivery to conclude by December 31st, 2009.
If there are any questions pertaining to this bulletin, please feel free to contact me.
Thank you again for your cooperation.
Best Regards,
Isaac Gonzalez
Configuration Manager
Ecliptek Corporation
3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234
EC Series
EC
• HC-49/U package
• AT cut
• Resistance weld seal
• Tight tolerance/stability
• Tape and reel, vinyl sleeve, insulator tab,
third lead, and custom lead length options
available
NOTES
H 13.58
L 11.18
W 4.70
CRYSTAL
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
OBSOLETE
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
ELECTRICAL SPECIFICATIONS
Frequency Range
1.8432MHz to 65.000MHz
Frequency Tolerance / Stability
±50ppm / ±100ppm (Standard), ±30ppm / ±50ppm,
Over Operating Temperature Range
±15ppm / ±30ppm, *±15ppm / ±20ppm, or ±10ppm / ±15ppm
Operating Temperature Range
0°C to 70°C (Standard), -20°C to 70°C, or -40°C to 85°C
Aging (at 25°C)
±5ppm / year Maximum
Storage Temperature Range
-40°C to 85°C
Shunt Capacitance
7pF Maximum
Insulation Resistance
500 Megaohms Minimum at 100VDC
Drive Level
2 mWatts Maximum
Load Capacitance (CL)
18pF (Standard), Custom CL ≥ 10pF, or Series Resonant
EQUIVALENT SERIES RESISTANCE (ESR), MODE OF OPERATION (MODE), AND CUT
Frequency Range
ESR (Ω)
Mode / Cut
Frequency Range
ESR (Ω)
Mode / Cut
1.8432MHz to 1.999MHz
650 Max
Fundamental / AT
4.100MHz to 4.999MHz
80 Max
Fundamental / AT
2.000MHz to 2.399MHz
550 Max
Fundamental / AT
5.000MHz to 5.999MHz
75 Max
Fundamental / AT
2.400MHz to 2.999MHz
350 Max
Fundamental / AT
6.000MHz to 6.999MHz
50 Max
Fundamental / AT
3.000MHz to 3.199MHz
250 Max
Fundamental / AT
7.000MHz to 7.999MHz
40 Max
Fundamental / AT
3.200MHz to 3.499MHz
200 Max
Fundamental / AT
8.000MHz to 9.999MHz
35 Max
Fundamental / AT
3.500MHz to 3.599MHz
180 Max
Fundamental / AT
10.000MHz to 12.999MHz
30 Max
Fundamental / AT
3.600MHz to 3.899MHz
150 Max
Fundamental / AT
13.000MHz to 32.768MHz
25 Max
Fundamental / AT
3.900MHz to 3.999MHz
120 Max
Fundamental / AT
24.000MHz to 29.999MHz
60 Max
Third Overtone / AT
4.000MHz to 4.099MHz
100 Max
Fundamental / AT
30.000MHz to 65.000MHz
40 Max
Third Overtone / AT
MANUFACTURER
CATEGORY
SERIES
PACKAGE
CLASS
ECLIPTEK CORP.
CRYSTAL
EC
HC-49/U
CR05
800-ECLIPTEK www.ecliptek.com for latest revision
REV.DATE
11/07
Specifications subject to change without notice.
PART NUMBERING GUIDE
EC A T - 20 - 30.000M - G TR
FREQUENCY TOLERANCE / STABILITY
Blank=±50ppm at 25°C, ±100ppm from 0°C to 70°C
A=±50ppm at 25°C, ±100ppm from -20°C to 70°C
B=±50ppm at 25°C, ±100ppm from -40°C to 85°C
C=±30ppm at 25°C, ±50ppm from 0°C to 70°C
D=±30ppm at 25°C, ±50ppm from -20°C to 70°C
E=±30ppm at 25°C, ±50ppm from -40°C to 85°C
F=±15ppm at 25°C, ±30ppm from 0°C to 70°C
G=±15ppm at 25°C, ±30ppm from -20°C to 70°C
H=±15ppm at 25°C, ±30ppm from -40°C to 85°C
J=±15ppm at 25°C, ±20ppm from 0°C to 70°C
K=±15ppm at 25°C, ±20ppm from -20°C to 70°C
L=±15ppm at 25°C, ±20ppm from -40°C to 85°C
M=±10ppm at 25°C, ±15ppm from 0°C to 70°C
N=±10ppm at 25°C, ±15ppm from -20°C to 70°C
PACKAGING OPTIONS
Blank=Bulk, A=Tray, TR=Tape and Reel
AVAILABLE OPTIONS
Blank=None (Standard), CLXXX=Custom Lead Length(pp46)
G=Gull Wing, G3=Gull Wing & Metal Jacket (pp47)
I2=Insulator Tab (pp48)
L=Third Lead(pp48)
L2=Alternate Third Lead (pp48)
V=Vinyl Sleeving (pp48)
FREQUENCY
LOAD CAPACITANCE
Blank=18pF (Standard), S=Series, XX=XXpF (Custom)
MODE OF OPERATION / CRYSTAL CUT
Blank=Fundamental / AT, T=Third Overtone / AT
OBSOLETE
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
MARKING SPECIFICATIONS
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
PARAMETER
SPECIFICATION
Fine Leak Test
Gross Leak Test
Mechanical Shock
Vibration
Lead Integrity
Solderability
Temperature Cycling
Resistance to Soldering Heat
Resistance to Solvents
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
MIL-STD-202, Method 213, Condition C
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 2004
MIL-STD-883, Method 2002
MIL-STD-883, Method 1010
MIL-STD-883, Method 210
MIL-STD-883, Method 215
Line 1: ECLIPTEK
Line 2: E XX.XXXM
Frequency in MHz (5 Digits Maximum + Decimal)
E or Blank (No Marking)
Line 3: XX
Ecliptek Manufacturing Identifier
MANUFACTURER
CATEGORY
SERIES
PACKAGE
CLASS
ECLIPTEK CORP.
CRYSTAL
EC
HC-49/U
CR05
800-ECLIPTEK www.ecliptek.com for latest revision
1000 Pieces per Reel
Compliant to EIA-468B
REV.DATE
11/07
Specifications subject to change without notice.
Similar pages