2.0x1.25mm SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: APHBM2012PBASURKC BLUE / HYPER RED ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description Features z2.0mmx1.25mm zBI SMT LED, 0.45mm MAX. THICKNESS. -COLOR, LOW POWER CONSUMPTION. zWIDE zIDEAL Light Emitting Diode. VIEWING ANGLE. The Hyper Red source color devices are made with DH FOR BACKLIGHT AND INDICATOR. InGaAlP on GaAs substrate Light Emitting Diode. zPACKAGE Static electricity and surge damage the LEDS. : 2000PCS / REEL. zMOISTURE zRoHS The Blue source color devices are made with InGaN on SiC SENSITIVITY LEVEL : LEVEL 3. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. COMPLIANT. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAG7624 REV NO: V.1 DATE: AUG/24/2006 PAGE: 1 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1203005980 Selection Guide Dice Part No. Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 18 50 70 200 BLUE (InGaN) APHBM2012PBASURKC WATER CLEAR HYPER RED (InGaAlP) Viewing Angle[1] 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity / luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue Hyper Red λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 468 650 nm IF=20mA Blue Hyper Red 470 635 nm IF=20mA Spectral Line Half-width Blue Hyper Red 21 28 nm IF=20mA C Capacitance Blue Hyper Red 100 35 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue Hyper Red 3.3 1.95 3.8 2.5 V IF=20mA IR Reverse Current Blue Hyper Red 10 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Hyper Red Units Power dissipation 114 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 100 185 mA Reverse Voltage 5 V Operating / storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG7624 REV NO: V.1 DATE: AUG/24/2006 PAGE: 2 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1203005980 APHBM2012PBASURKC Blue SPEC NO: DSAG7624 REV NO: V.1 DATE: AUG/24/2006 PAGE: 3 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1203005980 Hyper Red SPEC NO: DSAG7624 REV NO: V.1 DATE: AUG/24/2006 PAGE: 4 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1203005980 APHBM2012PBASURKC Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Tape Specifications (Units : mm) SPEC NO: DSAG7624 REV NO: V.1 DATE: AUG/24/2006 PAGE: 5 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1203005980 PACKING & LABEL SPECIFICATIONS APHBM2012PBASURKC SPEC NO: DSAG7624 REV NO: V.1 DATE: AUG/24/2006 PAGE: 6 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1203005980