Hamamatsu C5331-02 Operates an apd with single 5 v supply Datasheet

MODULE
APD module
C5331 series
Operates an APD with single 5 V supply
Features
Applications
l Choice of high sensitivity APDs
A total of 11 types are available, including 6 types of 800 nm band APDs with
active areas from φ0.2 to φ5 mm, 3 types of short-wavelength APDs with active
areas from φ1 to φ5 mm, and FC connector types.
l High sensitivity detection board optimized for APD evaluation
An APD and high-speed current-to-voltage amplifier circuit are mounted on a
compact board. The high-speed current-to-voltage amplifier circuit features a
low-noise configuration ideal for the APD signal readout and operates at high
speeds yet with high sensitivity.
l Easy handling
Single 5 V supply operation
l Built-in temperature-compensated bias voltage circuit
Controls the bias voltage with a thermosensor to keep the APD gain constant.
Gain is stabilized to as low as ±2.5 % Typ. at ambient temperatures of 25 ±10 ˚C.
Ripple noise usually inherent to high voltage power supplies is also minimized.
l Compact and lightweight
The circuit board is no larger than business card size, and weighs only 52 g.
l Low price
l Custom devices available with different dimensions and specifications
l APD evaluation
l Spatial light transmission
l Bar code readers
l Laser radars
l Optical rangefinders
l Optical communications
■ Selection guide
Type No.
C5331
C5331-30 *1
C5331-01
C5331-31 *2
C5331-02
C5331-03
C5331-04
C5331-05
C5331-11
C5331-12
C5331-13
Active area
(mm)
Frequency bandwidth
-3 dB
(Hz)
Type of APD
Peak sensitivity
wavelength
(nm)
Standard type
800
Short-wavelength type
620
φ1.5
φ0.2
φ0.5
φ1.0
φ3.0
φ5.0
φ1.0
φ3.0
φ5.0
*1: C5331 + FC connector
*2: C5331-01 + FC connector with lens
(compatible with GI 50/125 fiber)
4 k to 100 M
4 k to 80 M
4 k to 50 M
4 k to 100 M
4 k to 40 M
4 k to 20 M
■ Block diagram
HIGH VOLTAGE GENERATOR
+200 V
+5 V
+5 V
BNC CONNECTOR
Note: Gain is preset to 30 prior to shipping.
VOLTAGE CONTROLLER
TEMPERATURE MONITOR
HIGH-SPEED CURRENT-TO-VOLTAGE CIRCUIT
APD
KACCC0013EA
1
APD module
C5331 series
■ General ratings / Absolute maximum ratings
Type No.
Active
area
(mm)
C5331
C5331-30
C5331-01
C5331-31
C5331-02
C5331-03
C5331-04
C5331-05
C5331-11
C5331-12
C5331-13
Supply voltage
Current
consumption
Absolute maximum ratings
Board
Output
Weight Supply M axim um O perating Storage
dimension im pedance
Incident tem perature tem perature
voltage
light level Topr
Tstg
(mm)
(g)
(V)
(mW)
(°C)
(°C)
(Ω)
Min.
Typ.
Max.
Typ.
Max.
(V)
(V)
(V)
(mA)
(mA)
+4.75
+5
+5.25
+50
+80 80 × 50 × 23
φ1.5
φ0.2
φ0.5
φ1.0
φ3.0
φ5.0
φ1.0
φ3.0
φ5.0
50
52
+7
10
0 to +60 -20 to +70
■ Electrical and optical characteristics (Typ. Ta=25 °C, Vcc=5 V, unless otherwise noted)
Photoelectric converter section (APD)
Type No.
C5331
C5331-30
C5331-01
C5331-31
C5331-02
C5331-03
C5331-04
C5331-05
C5331-11
C5331-12
C5331-13
Spectral
Peak sensitivity
response range
wavelength
λ
λp
(nm)
(nm)
400 to 1000
800
Photo sensitivity
S
λ=800 nm, Gain=1 λ=620 nm, Gain=1
(A/W)
(A/W)
0.5
Temperature stability of gain *3
25 °C ± 10 °C, Gain=30
Typ.
Max.
(%)
(%)
±2.5
200 to 1000
620
-
±5
0.42
High-speed amplifier section
Cut-off frequency
NEP
Feedback Photoelectric sensitivity *3
-3 dB
resistance including APD, gain=30
Type No.
High band
Low band
λ=800 nm
λ=620 nm
Max.
Typ.
Max.
Min.
Typ.
Max.
Min. Typ.
Min. Typ.
Typ.
1/2
1/2
1/2
1/2
4
4
4
(MHz) (MHz) (kHz) (kHz) (pW/Hz ) (pW/Hz ) (pW/Hz ) (pW/Hz ) (kΩ) (10 V/W) (10 V/W) (10 V/W)
C5331
90
100
0.3
0.6
6.2
-4.3
-4.5
-4.7
C5331-30
C5331-01
90
100
0.3
0.6
10
-7.1
-7.5
-7.9
C5331-31
C5331-02
90
100
0.3
0.6
10
-7.1
-7.5
-7.9
3
4
C5331-03
90
100
0.3
0.6
9.1
-6.4
-6.75
-7.1
C5331-04
70
80
0.4
0.8
3.0
-2.1
-2.3
-2.4
C5331-05
40
50
0.7
1.4
1.1
-0.7
-0.75
-0.79
C5331-11
90
100
0.5
1.0
3.9
-2.3
-2.46
-2.7
C5331-12
30
40
1.3
2.6
2.0
-1.1
-1.26
-1.4
C5331-13
10
20
1.7
3.4
1.1
-0.65
-0.69
-0.75
*3: Gain is preset to 30 prior to shipping.
2
APD module
■ Spectral response
(M=30)
30
20
STANDARD TYPE
20
GAIN VARIATION (%)
PHOTO SENSITIVITY (A/W)
■ Gain temperature characteristic
(Typ. Ta=25 ˚C, λ=650 nm, M=30 *)
25
C5331 series
15
10
5
10
0
TYP.
-10
-20
SHORT-WAVELENGTH TYPE
0
200
400
600
800
-30
1000
0
WAVELENGTH (nm)
10
20
30
40
50
60
AMBIENT TEMPERATURE (˚C)
* Measured at a reverse voltage giving a gain of 30.
Incident light is 650 nm.
KAPDB0051EA
KACCB0020EB
■ Frequency response
105
■ Response to stepped light input (C5331-03)
(Typ. Ta=25 ˚C, λ=λp)
C5331-01/-02/-31
C5331-03
PHOTO SENSITIVITY (V/W)
C5331/-30 C5331-11
C5331-04 C5331-12
4
10
C5331-05
C5331-13
103
102
1 kHz
10 kHz
100 kHz
1 MHz
10 MHz
100 MHz
1 GHz
Ta=25 °C, gain M=30, input pulse width=20 µs
X-axis: 10 ns/div., Y-axis: 10 mV/div.
FREQUENCY
KACCB0021EB
3
APD module
C5331 series
■ Dimensional outlines (unit: mm)
C5331/-01/-02/-03/-04/-05/-11/-12/-13
C5331-30
45.0
45.0
POWER SUPPLY CONNECTOR (WITH CABLE)
(MOLEX 5484-02A)
1 ... +5 V
2 ... GND
POWER SUPPLY CONNECTOR (WITH CABLE)
(MOLEX 5484-02A)
1 ... +5 V
2 ... GND
80
75
12
75
SHIELD CASE
SHIELD CASE
(4 ×) 3.2
(4 ×) 3.2
BNC CONNECTOR
FOR SIGNAL OUTPUT
FC CONNECTOR
19.6
16.0
6.2
11.6
19.6
d
c
3.7
4.0
a
20.0
9.0
b
BNC CONNECTOR
FOR SIGNAL OUTPUT
(2 ×) M3
M8 × 0.75
11.6
(2 ×) M3
e
PHOTOSENSITIVE
SURFACE
8.0
2.5
2.5
PHOTOSENSITIVE
SURFACE
3.7
4.0
80
12
9.0
35.0
50
Tolerance unless otherwise noted: ±0.2
50
Tolerance unless otherwise noted: ±0.2
KACCA0093E
Type No.
C5331
C5331-01
C5331-02
C5331-03
C5331-04
C5331-05
C5331-11
C5331-12
C5331-13
a
b
c
d
20
35
6.2
16
25
40
8.6
20
20
35
6.2
16
25
40
8.6
20
e
8.2 ± 0.1
4.7 ± 0.1
4.7 ± 0.1
4.7 ± 0.1
8.1 ± 0.1
12.35 ± 0.1
4.7 ± 0.1
8.1 ± 0.1
12.35 ± 0.1
KACCA0093EA
KACCA0013EC
■ Attachment adapters for FC and SMA connectors
C5331-31
45.0
31, unit: mm)
APD module
C5331-01
C5331-02
C5331-03
C5331-04
C5331-05
C5331-11
C5331-12
C5331-13
C5460
C5460-01
POWER SUPPLY CONNECTOR (WITH CABLE)
(MOLEX 5484-02A)
1 ... +5 V
2 ... GND
75
80
12
SHIELD CASE
10.0
(4 ×) 3.2
11.6
19.6
20.0
SMA adapter
A8424-18
A8424-18
A8424-18
A8424-05A
A8424-18
A8424-05A
A8424-05
A8424-05A
BNC CONNECTOR
FOR SIGNAL OUTPUT
3.7
4.0
16.0
FC TYPE OPTICAL FIBER CONNECTOR
WITH BUILT-IN LENS
(2 ×) M3
6.2
M8 × 0.75
FC adapter
A8407-18
A8407-18
A8407-18
A8407-05A
A8407-08
A8407-18
A8407-05A
A8407-08
A8407-05
A8407-05A
9.0
35.0
50
Tolerance unless otherwise noted: ±0.2
Compatible with GI 50/125 fiber
KACCA0094EA
KACCA0094EA
(1) A high voltage power supply is used in this product. Do not remove insulating material potted on the board
to prevent possible danger.
(2) Be sure to terminate the output with 50 Ω when using this product.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2007 Hamamatsu Photonics K.K.
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184, www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741
4
Cat. No. KACC1007E05
Sept. 2007 DN
Similar pages