Anti-Surge Thick Film Chip Resistors Anti-Surge Thick Film Chip Resistors 0603, 0805, 1206, 1210 Type: ERJ P03, PA3, P06, P08, P14 ■ Features ● ESD surge characteristics superior to standard metal film resistors ● High reliability Metal glaze thick film resistive element and three layers of electrodes ● Suitable for both reflow and flow soldering ● High power… 0.20 W : 1608(0603) size(ERJP03) 0.25 W : 1608(0603) size(ERJPA3) 0.50 W : 2012(0805) size(ERJP06), 3225(1210) size(ERJP14) 0.66 W : 3216(1206) size(ERJP08) ● Reference Standards…IEC 60115-8, JIS C 5201-8, EIAJ RC-2134B ● AEC-Q200 qualified ● RoHS compliant ■ Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions Please see Data Files ■ Explanation of Part Numbers Product Code Thick Film Chip Resistors 1 2 3 4 5 6 7 8 9 10 11 12 & 3 + 1 % 7 Size, Power Rating Type: inch Power R. P03 : 0603 0.20 W PA3 : 0603 0.25 W P06 : 0805 0.50 W P08 : 1206 0.66 W P14 : 1210 0.50 W Resistance Tolerance Code Tolerance D ± 0.5 % F ±1% J ±5% Packaging Methods Resistance Value The first two or three digits are significant figures of resistance and the third or 4th one denotes number of zeros following. Three digit type (±5%), four digit type (±1%, ±0.5%) Example: 2222.2 k?, 100210 k? ■ Construction Packaging Code Type ERJP03 ERJPA3 ERJP06 ERJP08 V Punched Carrier Taping 4 mm pitch, 5,000 pcs. U Embossed Carrier Taping ERJP14 4 mm pitch, 5,000 pcs. ■ Dimensions in mm (not to scale) L a Protective coating Electrode (Inner) W Alumina substrate t b Electrode (Between) Type (inch size) Thick film resistive element ERJP03 (0603) ERJPA3 (0603) ERJP06 (0805) ERJP08 (1206) ERJP14 (1210) Electrode (Outer) Dimensions (mm) L W a b Mass (Weight) [g/1000 pcs.] t 1.60±0.15 0.80+0.15 0.15+0.15 0.30±0.15 0.45±0.10 –0.10 –0.05 ±0.15 1.60 ±0.20 2.00 +0.05 0.80 +0.15 –0.05 1.25 ±0.10 +0.15 –0.10 0.15 ±0.20 0.25 ±0.10 0.25 ±0.20 0.40 ±0.10 0.45 ±0.10 0.60 +0.05 2 2 4 3.20 –0.20 1.60 –0.15 0.40±0.20 0.50±0.20 0.60±0.10 10 3.20±0.20 2.50±0.20 0.35±0.20 0.50±0.20 0.60±0.10 16 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 06 Feb. 2014 19 Anti-Surge Thick Film Chip Resistors ■ Ratings Type (inch size) Power Rating at 70 °C (W) ERJP03 (0603) (3) Maximum Overload (2) Voltage (V) Limiting Element (1) Voltage (V) 0.20 150 Resistance Tolerance (%) Resistance Range (Ω) ±0.5 ±0.5, ±1 10 to 1 M (E24, E96) 10 to 1 M (E24, E96) 1 to 1 M (E24) 10 to 1 M (E24, E96) 1 to 1.5 M (E24) 10 to 1 M (E24, E96) ±5 1 to 3.3 M (E24) ±0.5, ±1 10 to 1 M (E24, E96) 1 to 10 M (E24) 10 to 1 M (E24, E96) 1 to 1 M (E24) 200 ±1 ±5 ±0.5, ±1 ERJPA3 (0603) 0.25 150 200 ±5 ERJP06 (0805) 0.50 ERJP08 (1206) 0.66 ERJP14 (1210) 0.50 400 600 500 1000 ±5 ±0.5, ±1 200 400 ±5 T.C.R. (×10 –6/°C) Category Temperature Range (°C) ±150 –55 to +155 ±200 R < 10 Ω : –150 to +400 10 Ω < R : ±200 ±100 –55 to +155 ±200 R < 33 Ω : ±300 33 Ω < R : ±100 R < 10 Ω : –100 to +600 10 Ω < R < 33 Ω : ±300 33 Ω < R : ±200 –55 to +155 ±100 R < 10 Ω : –100 to +600 10 Ω < R : ±200 –55 to +155 ±100 R < 10 Ω : –100 to +600 10 Ω < R : ±200 –55 to +155 (1) Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=√Power Rating × Resistance Values, or Limiting Element Voltage listed above, whichever less. (2) Overload (Short-time Overload) Test Voltage (SOTV) shall be determined from SOTV=2.5 × Power Rating or max. Overload Voltage listed above whichever less. (3) Use it on the condition that the case temperature is below 155 °C. –55 °C 100 ■ ESD Characteristic C=150pF Sample $IBOHF3BUJPPG 3FTJTUBODF7BMVF -15% -20% ERJ3G 100? 1k? 10k? 100k? 1M? 0% -5% ERJ8G -10% -15% -20% 100? 1k? 10k? 100k? ERJP06 (2012 (0805) size) ERJP06 -5% -10% ERJ6G -15% -20% 10? 1M? 100? 1k? 10k? 100k? 1M? ERJP14(3225 (1210) size) 5% ERJP08 10? 155 °C 0 20 40 60 80 100 120 140 160 180 Ambient Temperature (°C) 0% -25% -30% ERJP08(3216 (1206) size) 5% -25% -30% ERJ P03, PA3, P14 20 5% -10% 10? 40 Anti-Surge Thick Film Chip Resistors(ERJP Type) Thick Film Chip Resistors(ERJ Type) ERJP03 -5% -25% -30% ERJ P06, P08 60 $IBOHF3BUJPPG 3FTJTUBODF7BMVF $IBOHF3BUJPPG 3FTJTUBODF7BMVF 0% 125 °C 80 0 –60 –40 –20 ERJP03, PA3(1608 (0603) size) ERJPA3 5% 70 °C R=0?(1.5 k?)/150?(>1.5 k?) ±3.0kV $IBOHF3BUJPPG 3FTJTUBODF7BMVF Rated Load (%) Power Derating Curve For resistors operated in ambient temperatures above 70 °C, power rating shall be derated in accordance with the figure on the right. ✽ When the temperature of ERJP14 is 155 °C or less, the derating start temperature can be changed to 125 °C. (See the dotted line) ERJP14 0% -5% ERJ14 -10% -15% -20% -25% -30% 10? 100? 1k? 10k? 100k? 1M? Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 06 Feb. 2014 20 Anti-Surge Thick Film Chip Resistors (Double-sided resistive elements structure) Anti-Surge Thick Film Chip Resistors (Double-sided resistive elements structure) 0805 Type: ERJ P6W ■ Features ● ESD surge characteristics superior to standard metal film resistors ● High reliability Metal glaze thick film resistive element and three layers of electrodes ● Suitable for both reflow and flow soldering ● High power… 0.50 W : 2012(0805) size(ERJP6W) ● High pulse characteristics…1.5 times higher than 0805 inch size Anti-Surge Thick Film Chip Resistors (ERJP06) ● Reference Standards…IEC 60115-8, JIS C 5201-8, EIAJ RC-2134B ● AEC-Q200 qualified ● RoHS compliant ■ Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions Please see Data Files ■ Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 11 12 & 3 + 1 8 ' 7 Resistance Tolerance Size, Power Rating Product Code Thick Film Type: inch Power R. Code Tolerance Chip Resistors P6W : 0805 0.50 W F ±1% J ±5% Resistance Value The first two or three digits are significant figures of resistance and the third or 4th one denotes number of zeros following. Three digit type (±5%), four digit type (±1%) Example: 2222.2 k?, 100210 k? ■ Construction Protective coating Packaging Methods Code V Packaging Punched Carrier Taping 4 mm pitch, 5,000 pcs. ■ Dimensions in mm (not to scale) Electrode (Inner) L a Alumina substrate W t Electrode (Between) a Electrode (Outer) Thick film resistive element Bottom side element Dimensions (mm) Type (inch size) L W a t Mass (Weight) [g/1000 pcs.] ERJP6W (0805) 2.00±0.20 1.25±0.20 0.35±0.20 0.65±0.10 6 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2014 21 Anti-Surge Thick Film Chip Resistors (Double-sided resistive elements structure) ■ Ratings Power Rating at 70 °C (W) Type (inch size) ERJP6W (0805) (3) Limiting Element (1) Voltage (V) Maximum Overload (2) Voltage (V) 150 200 0.50 Resistance Tolerance (%) Resistance Range (Ω) T.C.R. (×10 –6/°C) ±1 10 to 1 M (E24, E96) ±200 ±5 1 to 1 M (E24) R < 10 Ω : –100 to +600 10 Ω < R : ±200 Category Temperature Range (°C) –55 to +155 (1) Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=√Power Rating × Resistance Values, or Limiting Element Voltage listed above, whichever less. (2) Overload (Short-time Overload) Test Voltage (SOTV) shall be determined from SOTV=2.5 × Power Rating or max. Overload Voltage listed above whichever less. (3) Use it on the condition that the case temperature is below 155 °C. –55 °C 100 Rated Load (%) Power Derating Curve For resistors operated in ambient temperatures above 70 °C, power rating shall be derated in accordance with the figure on the right. 70 °C 80 60 40 20 0 –60 –40 –20 ■ ESD Characteristic 155 °C 0 20 40 60 80 100 120 140 160 180 Ambient Temperature (°C) R=0?(1.5 k?)/150?(>1.5 k?) ±3.0kV C=150pF Sample Anti-Surge Thick Film Chip Resistors(ERJP6W Type) Thick Film Chip Resistors(ERJ6G Type) $IBOHF3BUJPPG 3FTJTUBODF7BMVF 5% 0% -5% -10% -15% -20% -25% -30% 10? 100? 1k? 10k? 100k? 1M? ■ Limiting Power Curve ● In rush pulse Characteristic Pulse duration : t Pp Limiting Power Test cycle : 1 cycles Spec : Resistance value = within ±1% 0 Anti-Surge Thick Film Chip Resistors(ERJP6W Type) Anti-Surge Thick Film Chip Resistors(ERJP06 Type) Limiting Power : Pp (W) 100 10 1 1 10 100 Pulse duration t (msec) 1000 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2014 22 Anti-Pulse Thick Film Chip Resistors Anti-Pulse Thick Film Chip Resistors 0805, 1206, 1210 Type: ERJ T06, T08, T14 ■ Features ● Anti-Pulse characteristics High pulse characteristics achieved by the optimized trimming specifications ● High reliability Metal glaze thick film resistive element and three layers of electrodes ● Suitable for both reflow and flow soldering ● High power… 0.25 W : 2012(0805) size 0.33 W : 3216(1206) size 0.5 W : 3225(1210) size ● Reference Standards…IEC 60115-8, JIS C 5201-8, EIAJ RC-2134B ● AEC-Q200 qualified ● RoHS compliant ■ Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions Please see Data Files ■ Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 11 & 3 + 5 + 7 Product Code Thick Film Chip Resistors Size, Power Rating Type: inch Power R. T06 : 0805 0.25 W T08 : 1206 0.33 W T14 : 1210 0.5 W Resistance Tolerance Code J Packaging Methods Code Tolerance ±5% Type Packaging V Punched Carrier Taping 4 mm pitch, 5,000 pcs. U Embossed Carrier Taping ERJT14 4 mm pitch, 5,000 pcs. ERJT06 ERJT08 Resistance Value The first two digits are significant figures of resistance and the third one denotes number of zeros following. Example: 2222.2 k? ■ Construction ■ Dimensions in mm (not to scale) Protective coating L a Alumina substrate Electrode (Inner) W t b Electrode (Between) Type (inch size) Thick film resistive element Electrode (Outer) Dimensions (mm) L W a ERJT06 (0805) 2.00 ERJT08 (1206) 3.20 –0.20 1.60 –0.15 0.40 ERJT14 (1210) 3.20 ±0.20 +0.05 ±0.20 ±0.10 1.25 ±0.20 0.40 ±0.20 0.50 ±0.20 0.50 0.25 +0.05 ±0.20 2.50 b 0.35 Mass (Weight) [g/1000 pcs.] t ±0.20 0.60 ±0.10 4 ±0.20 0.60 ±0.10 10 ±0.20 0.60 ±0.10 16 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Feb. 2014 23 Anti-Pulse Thick Film Chip Resistors ■ Ratings Power Rating at 70 °C (W) Limiting Element (1) Voltage (V) Maximum Overload (2) Voltage (V) Resistance Tolerance (%) Resistance Range (Ω) T.C.R. (×10 –6/°C) Category Temperature Range (°C) ERJT06 (0805) 0.25 150 200 ±5 1 to 1 M (E24) Less than 10 Ω : –100 to +600 Less than 33 Ω : ±300 More than 33 Ω : ±200 –55 to +155 ERJT08 (1206) 0.33 200 400 ±5 1 to 1 M (E24) Less than 10 Ω : –100 to +600 More than 10 Ω : ±200 –55 to +155 ERJT14 (1210) 0.5 200 400 ±5 1 to 1 M (E24) Less than 10 Ω : –100 to +600 More than 10 Ω : ±200 –55 to +155 Type (inch size) (1) Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=√Power Rating × Resistance Values, or Limiting Element Voltage listed above, whichever less. (2) Overload (Short-time Overload) Test Voltage (SOTV) shall be determined from SOTV=2.5 × Power Rating or max. Overload Voltage listed above whichever less. –55 °C 100 Rated Load (%) Power Derating Curve For resistors operated in ambient temperatures above 70 °C, power rating shall be derated in accordance with the figure on the right. 70 °C 80 60 40 20 0 –60 –40 –20 155 °C 0 20 40 60 80 100 120 140 160 180 Ambient Temperature (°C) ■ Limiting Power Curve ● In rush pulse Characteristic Pulse duration : t Pp Limiting Power Test cycle : 1000 cycles Spec : Resistance value = within ±5% "OUJ1VMTF5IJDL'JMN$IJQ3FTJTUPST &3+55ZQF 5IJDL'JMN$IJQ3FTJTUPST &3+5ZQF Period time : 10 s ● ERJT06 (2012 (0805) size) ● ERJT08 (3216 (1206) size) 10 10 100 Pulse duration t (msec) 1000 Limiting Power : Pp (W) Limiting Power : Pp (W) 100 1 1 ● ERJT14 (3225 (1210) size) 100 1000 Limiting Power : Pp (W) 0 100 10 1 1 10 100 Pulse duration t (msec) 1000 10 1 1 10 100 Pulse duration t (msec) 1000 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Feb. 2014 24