CREE CLV6A-FKB-CK1P1G1BB7R3R3 Plcc6 3 in 1 smd led Datasheet

Cree® PLCC6 3 in 1 SMD LED
CLV6A-FKB
Data Sheet
These SMD LEDs are packaged in an industry standard PLCC6 package.
These high performance tricolor SMT LEDs are designed to work in a wide
range of applications. A wide viewing angle and high brightness make
these LEDs suitable for outdoor signage applications.
The encapsulation resin contains UV inhibitors to minimize the effects of
long-term exposure to direct sunlight, resulting in stable light output over
the life of the LED.
FEATURES
• RoHS Compliant
• Size (mm): 5.5 x 5.5
APPLICATIONS
• Dominant Wavelength (nm):
Red (619-624 )
Green (520-540)
Blue (460-480)
•
Luminous Intensity (mcd)
Red (560 - 1120)
Green (1120 - 2240)
Blue (280 - 560)
• Outdoor Full-Color Video Screen
• Decorative lighting
• Amusement
• Water-Resistant (IPX5*)
• Moisture Sensitivity Level: 3
• Lead-Free
2
D-CT1163.00
Data Sheet: CL
* This part is tested under the condition of assembling it on a PCB with isolating the electrical path by silicone.
Subject to change without notice.
www.cree.com/ledlamps
1
Absolute Maximum Ratings (TA = 25°C)
Items
Symbol
Absolute Maximum Rating
Unit
R
G
B
IF
50
35
35
mA
IFP
200
100
100
mA
Reverse Voltage
VR
5
5
5
V
Power Dissipation
PD
130
140
140
mW
Operation Temperature
Topr
-40 ~ +100
°C
Storage Temperature
Tstg
-40 ~ +100
°C
Junction Temperature
TJ
110
110
110
°C
Junction/ambient 1 chip on
RTHJA
450
400
450
°C/W
Junction/ambient 3 chips on
RTHJA
650
580
680
°C/W
Junction/solder point 1 chip on
RTHJS
230
230
200
°C/W
Junction/solder point 3 chips on
RTHJS
230
230
200
°C/W
Electrostatic Discharge
Classification(MIL-STD-883E)
ESD
Forward Current
Note 1
Peak Forward Current
Note 2
1000 V
Note:
1.
2.
Single-color light.
Pulse width ≤0.1 msec, duty ≤1/10.
Typical Electrical & Optical Characteristics (TA = 25°C)
Characteristics
Condition
Symbol
Wavelength at peak emission
IF = 20 mA
Dominant Wavelength
Spectral bandwidth at 50% IREL max
Viewing Angle at 50% IV
IF = 20 mA
Forward Voltage
Luminous Intensity
Reverse Current (max)
Values
G
B
λPEAK
630
527
470
nm
IF = 20 mA
λDOM
619~624
520~540
460~480
nm
IF = 20 mA
Δλ
24
38
28
nm
2θ½
120
120
120
deg
VF(avg)
2.0
3.2
3.2
V
IF = 20 mA
IF = 20 mA
VR = 5 V
VF(max)
2.6
4.0
4.0
V
IV(min)
560
1120
280
mcd
IV(avg)
700
1600
400
mcd
IR
10
10
10
μA
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
2
CLD-CT1163.002
Unit
R
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Intensity Bin Limit (IF = 20 mA)
Red Bin
Code
Min.
(mcd)
Max.
(mcd)
K
560
M
N
Green
Blue
Bin
Code
Min.
(mcd)
Max.
(mcd)
Bin
Code
Min.
(mcd)
Max.
(mcd)
710
P
1120
1400
G
280
355
710
900
Q
1400
1800
H
355
450
900
1120
R
1800
2240
J
450
560
• Tolerance of measurement of luminous intensity is ±10%
Color Bin Limit (IF = 20 mA)
Red Green Blue Bin Code
Min.(nm)
Max.(nm)
Bin Code
Min.(nm)
Max.(nm)
Bin Code
Min.(nm)
Max.(nm)
RB
619
624
G7
520
525
B3
460
465
G8
525
530
B4
465
470
G9
530
535
B5
470
475
Ga
535
540
B6
475
480
• Tolerance of measurement of dominant wavelength is ±1 nm
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
3
CLD-CT1163.002
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Order Code Table*
Luminous Intensity (mcd)
Kit Number
Color
CLV6A-FKB-CKNPRGJBB7a363
Blue
CLV6A-FKB-CK1P1G1BB7R3R3
CLV6A-FKB-CM1Q1H1BB7R3R3
Dominant Wavelength (nm)
Color
Bin
Min.
(nm)
Color
Bin
Max.
(nm)
Package
Min.
Max.
Red
560
1120
RB
619
RB
624
Reel
Green
1120
2240
G7
520
Ga
540
Reel
280
560
B3
460
B6
480
Reel
RB
619
RB
624
Reel
Red
Any 1 Intensity bin from K(560) - N(1120)
Green
Any 1 Intensity bin from P(1120) - R(2240)
Any 1 hue bin from G7(520) - Ga(540)
Reel
Blue
Any 1 Intensity bin from G(280) - J(560)
Any 1 hue bin from B3(460) - B6(480)
Reel
Red
Any 1 Intensity bin from M(710) - N(1120)
Green
Any 1 Intensity bin from Q(1400) - R(2240)
Any 1 hue bin from G7(520) - Ga(540)
RB
619
RB
624
Reel
Reel
Blue
Any 1 Intensity bin from H(355) - J(560)
Any 1 hue bin from B3(460) - B6(480)
Reel
Notes:
1. The above kit numbers represent the order codes which include multiple intensity-bin and color-bin codes. Only one
intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin code and single color-
bin code will be orderable in certain quantities.
2. For example, any 1 intensity-bin from K - N means only 1 intensity-bin (K or M or N) will be shipped by Cree.
3. For example, any 1 color-bin from G7 - Ga means only 1 color-bin (G7 or G8 or G9 or Ga) will be shipped by Cree.
4. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.
5. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
4
CLD-CT1163.002
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Graphs
The above data are collected from statistical figures that do not necessarily correspond to the actual
parameters of each single LED. Hence, these data will be changed without further notice.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
5
CLD-CT1163.002

Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Graphs
The above data are collected from statistical figures that do not necessarily correspond to the actual
parameters of each single LED. Hence, these data will be changed without further notice.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
6
CLD-CT1163.002
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Mechanical Dimensions
All dimensions are in mm.
Notes
RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or
otherwise restricted materials in this product are below the maximum concentration values (also referred to as the
threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(RoHS), as amended through April 21, 2006.
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
7
CLD-CT1163.002
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage,
and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED
Lamp Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following
manner:
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
8
CLD-CT1163.002
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Reliability
Tests and Results
Test
Applicable Standards
Test Condition
Note
Number of
Damaged
Temperature Cycle
JEITA ED-4701
100 105
-40°C~25°C~100°C~25°C
30 mins, 5 mins, 30 mins, 5 mins
100 cycles
0/45
Thermal Shock
MIL-STD-202G
-40°C~100°C
30 mins, 30 mins
100 cycles
0/45
Moisture Resistance
JEITA ED-4701
200 203
10 cycles
0/45
High Temperature Storage
JEITA ED-4701
200 201
TA=100°C
500 hrs
0/45
Temperature Humidity Storage
JEITA ED-4701
100 103
TA=60°C
RH=90%
500 hrs
0/45
Low Temperature Storage
JEITA ED-4701
200 202
TA=-40°C
500 hrs
0/45
Water Proof Test*
IEC 60529:2001
IP X5
Water flow rate 12.5 l/min
15min
0/45
High Temperature Life Test
-
TA=85°C
IF=15 mA
1000 hrs
0/45
Life Test
-
TA=25°C
IF: R=30mA G=35mA B=20mA
1000 hrs
0/45
High Humidity Heat Life Test
-
60°C RH=90%
IF=15 mA
500 hrs
0/45
Low Temperature Life Test
-
Ta=-40°C
IF: R=30mA G=35mA B=20mA
500 hrs
0/45
Resistance to Soldering Heat(Reflow
Soldering)
JEITA ED-4701
300 301
Tsol=260°C,10sec
(Pre treatment 30°C,70%,168hrs)
2 times
0/45
Vibration-variable Frequency
MIL-STE-883
Method 2007
20G min, 20 to 2000Hz, 4cycles, 4mins,
Each x,y,z
/
0/45
Electrostatic Discharge Test
AEC(Q101-001)
Human body model 1000 V
(Forward and reverse current conduct
electricity each 1time)
/
0/45
25°C~65°C~
90%RH 24hrs/1cycle
Water proof test*: The test is conducted on component level. It is strongly recommended the customers test the
products for their application
Failure Criteria
Criteria for Judgment
Item
Symbol
Test
Condition
Min.
Max.
Forward Voltage
VF
IF = 20 mA
–
Initial Data x 1.1
Reverse Current
IR
VR = 5 V
-
100 μA
Luminous Flux/Intensity
ФV
IF = 20 mA
Initial Data x 0.7
-
Resistance to Soldering
Heat
-
IF = 20 mA
No dead lamps and visual damage
Vibration-variable
Frequency
-
IF = 20 mA
No dead lamps and visual damage
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
9
CLD-CT1163.002
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Reflow Soldering
•
•
•
•
The CLV6A-FKB is rated as a MSL 3 product. The recommended floor life out of bag is 24hrs.
The best practices suggestion is to use the product as soon as possible when removed
from the No.:
bag. COTCO-05-0057
Document
The temperature (Top surface of SMD LED) profile is as below:
Rev. NO. : 13
Temperature
Melting-point
Pre-heat
Soak
Reflow
Cooling
Time
Use all SMD besides LP6-NPP1-01-N1
Solder
Sn63-Pb37
Solder Soldering
= Lead-free
Use
only =
with
CLV6A-FKB
pad:
2.7
Average ramp-up rate = 4ºC/s max
Solder
= Low
Lead-Free
Average ramp-up rate
= 4ºC/s
max.
Average ramp-up rate = 4ºC/s max
Preheat temperature = 150ºC ~200ºC
Preheat time = 100s max.
Ramp-down rate = 6ºC/s max.
Ramp-down rate = 6ºC/s max.
Peak temperature = 230ºC max.
Peak temperature = 250ºC max.
Ramp-down rate = 6ºC/s max
Peak temperature = 235ºC max
Time
within
of actual
Temperature
= 10s
Time
within
5ºC5ºC
of actual
Peak Peak
Temperature
= 10s max
Duration
above
183ºC
80s
Duration
above
217ºC
is 45sismax
Only use LP6-NPP1-01-N1
max.
max.
1.7 1.3 1.7
Preheat time = 100s max.
Preheat time = 120s max
Time within 5ºC of actual Peak Temperature = 10s max.
0.475
5.65
Preheat temperature = 100ºC ~150ºC
Preheat temperature = 150ºC ~200ºC
Duration above 217ºC is 80s max.
[13]
8.2
Solder = Low Lead-free
Average ramp-up rate = 3ºC/s max.
Preheat temperature = 130ºC ~170ºC
Preheat time = 120s max.
Ramp-down rate = 6ºC/s max.
Peak temperature = 213ºC max.
Time within 3ºC of actual Peak Temperature = 25s max.
Duration above 200ºC is 40s max.
Recommended solder pad design for heat dissipation (2-pin SMD LED):
7.0
2.6
CLD-CT1163.002
7.5
10
4.5
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Package
•
•
•
•
•
The boxes are not water resistant and they must be kept away from water and moisture.
The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.
Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation.
The reel pack is applied in SMD LED.
Max 900 pcs per reel.







防潮珠。不可食

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
11
CLD-CT1163.002
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Similar pages