ZETTLER AZ733W-2A-6D Dpst miniature power relay Datasheet

AZ733W
DPST MINIATURE
POWER RELAY
FEATURES
•
•
•
•
•
•
•
Dielectric strength 5000 Vrms
1.5 mm contact gap
Epoxy sealed version available
10 Amp switching — double pole contacts
Isolation spacing greater than 8 mm
UL, CUR file E44211
TÜV file R9659062
CONTACTS
Arrangement
Ratings
GENERAL DATA
DPST (2 Form A)
Resistive load:
Max. switched power: 240 W or 2500 VA
Max. switched current: 10 A
Max. switched voltage: 150 VDC* or 400 VAC
Life Expectancy
Mechanical
Electrical
Minimum operations
5 x 105
1 x 105 at 10 A 250 VAC Res.
Operate Time (typical)
10 ms at nominal coil voltage
Release Time (typical)
4 ms at nominal coil voltage
(with no coil suppression)
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Rated Load
UL, CUR
10 A at 250 VAC general use 100k cycles [1] [2] [3]
TV-3 at 125 VAC [1]
Dielectric Strength
5000 Vrms contact to coil
(at sea level for 1 min.) 3000 Vrms between open contacts
3000 Vrms between contact sets
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
10 A at 30 VDC resistive, 100k cycles [1] [2] [3]
10 A at 250 VAC resistive, 100k cycles [1] [2] [3]
Dropout
Greater than 10% of nominal coil voltage
Material
Silver cadmium oxide [1], silver tin oxide [2]
or silver nickel [3]
Ambient Temperature
Operating
Storage
at nominal coil voltage
-40°C (-40°F) to 70°C (158°F)
-40°C (-40°F) to 105°C (221°F)
Resistance
< 50 milliohms initially
Vibration
0.062" (1.5 mm) DA at 10–55 Hz
Shock
10 g
TÜV
COIL
Enclosure
P.B.T. polyester
At Pickup Voltage
(typical)
450 mW
Terminals
Tinned copper alloy, P.C.
Max. Continuous
Dissipation
2.0 W at 20°C (68°F) ambient
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Temperature Rise
40°C (83°F) at nominal coil voltage
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
18 grams
Packing unit in pcs
50 per plastic tray / 500 per carton box
Power
Temperature
Max. 130°C (266°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
ZETTLER
electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
[email protected]
www.ZETTLERelectronics.com
2005-02-16
AZ733W
RELAY ORDERING DATA
COIL SPECIFICATIONS
Nominal Coil
VDC
3
5
6
9
12
18
24
48
60
110
Must Operate
VDC
2.25
ORDER NUMBER
Max. Continuous
VDC
4.7
3.8
4.5
6.8
9.0
13.5
18.0
36.0
45.0
82.5
Coil Resistance
Ohm
11.3 ±10%
7.9
9.5
14.2
18.9
28.4
37.9
75.9
94.8
183.3
31
45
101
180
405
720
2,880
4,500
16,800
±10%
±10%
±10%
±10%
±10%
±15%
±15%
±15%
±15%
Unsealed
AZ733W–2A–3D
Sealed
AZ733W–2A–3DE
AZ733W–2A–5D
AZ733W–2A–6D
AZ733W–2A–9D
AZ733W–2A–12D
AZ733W–2A–18D
AZ733W–2A–24D
AZ733W–2A–48D
AZ733W–2A–60D
AZ733W–2A–110D
AZ733W–2A–5DE
AZ733W–2A–6DE
AZ733W–2A–9DE
AZ733W–2A–12DE
AZ733W–2A–18DE
AZ733W–2A–24DE
AZ733W–2A–48DE
AZ733W–2A–60DE
AZ733W–2A–110DE
* Add suffix “B” to “2A” for silver nickel contacts.
Add suffix “E” to “2A” for silver tin oxide contacts.
MECHANICAL DATA
PC BOARD LAYOUT
.787
(20.0)
.51
(13)
.197
(5)
.295 (7.5)
0.015
(0.38)
1.02
(25.9)
.160 ± .015
(4.2 ± .4)
1.14
(29)
.08
(2.1)
6 x ø .05
[ø 1.3]
Viewed toward terminals
WIRING DIAGRAM
Terminal No. Dimensions Tol.: ± 0.005 (0.13)
1,4,5,8
0.018 (0.457) x 0.038 (0.965)
3,6
0.011 (0.279) x 0.038 (0.965)
1
3
4
8
6
5
Viewed toward terminals
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
ZETTLER
electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
[email protected]
www.ZETTLERelectronics.com
2005-02-16
Similar pages