1W SMD Package DC-DC Unregulated Converter ■ Features SMD package with industry standard pinout Operating temperature range -40 ~ +90℃ Comply to EN55032 radiated Class B without additional components High efficiency up to 83% Protection: Short circuit 3KVDC I/O isolation Low cost 3 years warranty DETN01 series ■ Applications Telecom/ datacom system Wireless network Industrial control facility Instrument Analyzer Detector Data switch ■ Description DETN01 series is 1 W isolated and unregulated module type DC-DC converter with S MD package. It features international standard pins, a high efficiency up to 83%, wide working temperature range -40~+90℃, 3KVDC I/P-O/P isolation voltage, compliance to EN55032 radiated Class B without additional components, short circuit protection, etc. The models account for different input voltage 5V/12V/24V±10%, and various output voltage, ±5V/±12V/±15V for Dual output which are suitable for all kinds of systems, s uch as industrial control, telecommunication field, distributed power architecture, and so on. ■ Model Encoding DETN01 L - 12 - SC Performance difference Output voltage (±5/±12/±15Vdc) Input voltage (L: 4.5 ~ 5.5Vdc，M: 10.8 ~ 13.2Vdc，N: 21.6 ~ 26.4Vdc) Rated wattage Series name Type Blank SC Description -40~+90℃ working temperature with max. 1 second short protection -40~+105℃ working temperature with continuous short protection Note In Stock Optional File Name:DETN01-SPEC 2017-07-14 DETN01 series 1W SMD Package DC-DC Unregulated Converter MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) OUTPUT INPUT CURRENT OUTPUT VOLTAGE OUTPUT CURRENT EFFICIENCY (TYP.) CAPACITOR LOAD (MAX.) NO LOAD FULL LOAD 30mA 260mA ±5V ±10 ~ 100mA 78% 220μF 28mA 257mA ±12V ±4.2 ~ 42mA 78% 220μF DETN01L-15 28mA 253mA ±15V ±3.4 ~ 34mA 80% 220μF DETN01M-05 13mA 107mA ±5V ±10 ~ 100mA 82% 220μF 12mA 103mA ±12V ±4.2 ~ 42mA 82% 220μF DETN01M-15 13mA 102mA ±15V ±3.4 ~ 34mA 83% 220μF DETN01N-05 11mA 55mA ±5V ±10 ~ 100mA 76% 220μF 11mA 55mA ±12V ±4.2 ~ 42mA 77% 220μF 11mA 55mA ±15V ±3.4 ~ 34mA 78% 220μF DETN01L-05 DETN01L-12 DETN01M-12 DETN01N-12 DETN01N-15 Normal 5V (4.5 ~ 5.5V) Normal 12V (10.8 ~ 13.2V) Normal 24V (21.6 ~ 26.4V) File Name:DETN01-SPEC 2017-07-14 1W SMD Package DC-DC Unregulated Converter DETN01 series SPECIFICATION L: 4.5 ~ 5.5Vdc VOLTAGE RANGE M: 10.8 ~ 13.2Vdc N: 21.6 ~ 26.4Vdc 5Vin models : 9Vdc SURGE VOLTAGE (100ms max.) 12Vin models : 16Vdc INPUT 24Vin models : 30Vdc FILTER Internal capacitor PROTECTION Fuse recommended. 5Vin models: 750mA Slow-Blow Type 12Vin models: 300mA Slow-Blow Type 24Vin models: 150mA Slow-Blow Type INTERNAL POWER DISSIPATION 500mW OUTPUT VOLTAGE ACCURACY ±2.0% RATED POWER 1W RIPPLE & NOISE Note.2 75mVp-p LINE REGULATION Note.3 1.2% for 1% input variation LOAD REGULATION Note.4 ±8% SWITCHING FREQUENCY (Typ.) 100KHz PROTECTION SHORT CIRCUIT COOLING ENVIRONMENT Standard model: 0.5 second max. Optional models (SC-suffix): Continuous Free-air convection WORKING TEMP. Standard model: -40 ~ +90℃ (Refer to "Derating Curve") ; Optional models (SC-suffix): -40 ~ +105℃ CASE TEMPERATURE +100℃ max. WORKING HUMIDITY 20% ~ 90% RH non-condensing STORAGE TEMP., HUMIDITY -55 ~ +1 25℃, 10 ~ 95% RH non-condensing TEMP. COEFFICIENT 0.03% / ℃ (0 ~ 85℃) SOLDERING TEMPERATURE 1.5mm from case of 1 ~ 10sec./240℃ max. VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes WITHSTAND VOLTAGE I/P-O/P:3KVDC ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH ISOLATION CAPACITANCE (Typ.) 80pF Parameter Standard Test Level / Note( Note.6) Conducted EN55032(CISPR32) N/A SAFETY & Radiated EN55032(CISPR32) Class B EMC ( Note.5,6) Parameter Standard Test Level / Note ESD EN61000-4-2 Level 3, ±8KV air Radiated Susceptibility EN61000-4-3 Level 2, 3V/m EFT/Burest EN61000-4-4 Level 1, 0.5KV Surge EN61000-4-5 Level 2, 0.5KV Line-Line Conducted EN61000-4-6 Level 2, 3V Magnetic Field EN61000-4-8 Level 1, 1A/m EMC EMISSION EMC IMMUNITY OTHERS NOTE MTBF 880Khrs min. MIL-HDBK-217F(25℃) DIMENSION (L*W*H) 15.24*10.7*7.1mm (0.6*0.42*0.28 inch) CASE MATERIAL Non-Conductive black plastic (UL 94V-0 rated) PACKING 1.2g 1.All parameters are specified at normal input(L:5Vdc, M:12Vdc, N:24Vdc), rated load, 25℃ 70% RH ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 10% to 100% rated load. 5.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.(as available on http://www.meanwell.com) 6.An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: 470μF/100V. File Name:DETN01-SPEC 2017-07-14 DETN01 series 1W SMD Package DC-DC Unregulated Converter Mechanical Specification All dimensions in mm(inch) Tolerance:x.x±0.5mm( x.xx±0.02") x.xx±0.25mm( x.xxx±0.01") Pin size is 0 . 50 x0 . 30 mm ( 0 . 02" x 0.01") Pin is Tolerance:x.xx±0.07mm( x.xx x±0.03") 10.7(0.42) S ide View 7.1(0.28) 6.7(0.26) 15.24(0.60) S ide View 8.5(0.33) 2.54(0.1)x5 11.1(0.44) 15.24(0.60) 0.55(0.022) 7 TOP View 1 2 3 5 1 11.1.(0.44) 8 6 2 3 12 11 10 5 6 8 7 10.7(0.42) 12 11 10 Bottom View Derating Curve Pin No. Pin-Out 1 -Vin 2 +Vin 5 Common 6 -Vout 8 +Vout 3,7,10,11,12 N.C. 100 LOAD (%) Plug Assignment 60 40 Natural convection 20 -40 Reflow Soldering Curve for DETN01 for DETN01-SC 80 -20 0 20 40 60 85 90 100 105 Ta (℃) Remark: The curve applies only to the hot air reflow soldering. Installation Manual Please refer to : http://www.meanwell.com/manual.html File Name:DETN01-SPEC 2017-07-14