UNISONIC TECHNOLOGIES CO., LTD BD2378 Preliminary DUAL TRANSISTOR COMPLEMENTARY NPN/PNP SMALL SIGNAL SURFACE MOUNT TRANSISTOR DESCRIPTION The UTC BD2378 is a complementary NPN/PNP small signal surface mount transistor. It’s suitable for low power amplification and switch. FEATURES * Epitaxial Planar Die Construction * Extremely-Small Surface Mount Package EQUIVALENT CIRCUIT ORDERING INFORMATION Ordering Number BD2378G-K08-5060-R Note: Pin Assignment: E: Emitter B: Best Package DFN-8(5×6) C: Collector BD2378G-K08-5060-R Packing 1 2 3 4 5 6 7 8 E1 B1 E2 B2 C2 C2 C1 C1 Tape Reel (1)Packing Type (1) R: Tape Reel (2)Package Type (2) K08-5060: DFN-8(5×6) (3)Green Package (3) G: Halogen Free and Lead Free MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 4 QW-R230-001.b BD2378 Preliminary DUAL TRANSISTOR PIN CONFIGURATION DFN-8(5×6) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 4 QW-R230-001.b BD2378 Preliminary DUAL TRANSISTOR ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified.) TR1 PARAMETER Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Continuous Collector Current Collector Dissipation Junction Temperature Storage Temperature Range SYMBOL VCBO VCEO VEBO IC PC TJ TSTG RATINGS 100 80 5 2 1.25 150 -55~150 UNIT V V V A W °C °C TR2 PARAMETER SYMBOL RATINGS UNIT Collector-Base Voltage VCBO -100 V Collector-Emitter Voltage VCEO -80 V Emitter-Base Voltage VEBO -5 V Collector Current IC -2 A Collector Power Dissipation Pc 1.25 W Junction Temperature TJ 150 °C Storage Temperature TSTG -55~150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (TA=25°C, unless otherwise specified.) TR1 PARAMETER Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage Collector Cut-Off Current Emitter Cut-Off Current Collector-Emitter Saturation Voltage DC Current Gain Transition Frequency SYMBOL BVCBO BVCEO BVEBO ICBO IEBO VCE(sat) hFE (1) hFE (2) fT TEST CONDITIONS MIN IC=1mA, IE=0 100 IC=100mA, IB=0 80 IE=1mA, IC=0 5 VCB=100V, IE=0 VEB=5V, IC=0 IC=1A, IB=100mA IC=150mA,VCE=2V 40 IC=1A,VCE=2V 25 IC=250mA, VCE=10V, f=10MHz 3 SYMBOL V(BR)CBO V(BR)CEO V(BR)EBO ICBO IEBO hFE(1) hFE(2) VCE(sat) TEST CONDITIONS IC=-1mA, IE=0 IC=-100mA, IB=0 IC=-1mA, IE=0 VCB=-100V, IE=0 VEB=-5V, IC=0 VCE=-2V, IC=-150mA VCE=-2V, IC=-1A IC=-1A, IB=-100mA VCE=-10V, IC=-250mA, f=10MHz TYP MAX UNIT V V V 100 µA 1 mA 0.6 V MHz TR2 PARAMETER Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage Collector Cut-Off Current Emitter Cut-Off Current DC Current Gain Collector-Emitter Saturation Voltage Transition Frequency fT UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT -100 V -80 V -5 V -100 µA -1 mA 40 25 -0.6 V 3 MHz 3 of 4 QW-R230-001.b BD2378 Preliminary DUAL TRANSISTOR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 4 QW-R230-001.b