Willow DG34-1011-36-5120 Pcb / industrial power relay Datasheet

DG34
pcb / industrial power relay
• Up to 40A /240VAC continuous rating
• 110VDC maximum switching voltage
• Industry standard style
• Cost effective
• RoHS Compliant
E325835
Contacts
Contact number & arrangement
SPST-NO (1 Normally Open); SPDT ( 1 Changeover)
Contact material
AgSnO2 (standard), AgCdO
Max. switching voltage
AgSnO2 : 250VAC / 110VDC
AgCdO : 250VAC / 28VDC
Min. switching current / voltage
500mA/12VDC (AgCdO, AgSnO2)
Max. continuous current
AgSnO2 : SPST-NO: 40A / SPDT: 40A (NO), 30A (NC)
AgCdO : SPST-NO: 30A / SPDT: 30A (NO), 20A (NC)
Max. switching current
AgSnO2 : SPST-NO: 40A / SPDT: 40A (NO), 30A (NC)
Max. switching power
AgSnO2 : 7200VA / 1100W : AgCdO: 6000VA / 560W
Initial resistance
≤ 100mΩ, max. at 0.1A/6VDC
Coil
Rated voltage
3...110VDC; 12...220VAC
Must release voltage
DC ≥ 0.1Un : AC ≥ 0.3Un
Operating range of supply voltage
See coil tables 1 & 2
Rated power consumption
0.93W (DC), 1.2VA (AC)
Insulation
Insulation resistance
>100MΩ at 500VDC, 50%RH
Dielectric strength
coil to contact 4000Vrms, 1min (50Hz)
between open contacts 1500Vrms, 1min (50Hz)
creepage / clearance - coil to contact ≥ 3mm
General Data
Operating time (typical)
ms 15
Release time (typical)
ms 10
Electrical Life
ops 1 x 105 (1s on / 1s off)
Mechanical life
ops 1 x 106 (300 ops per minute)
Dimensions
Weight
L x W x H various - see dimensional drawings. (Figs 1 & 4)
≤ 36g
Ambient temperature
storage -40 to 155°C
operating -40 to 125°C
Shock resistance
Functional: 10g 11mS; Destructive: 100g
Drop resistance
1M height drop on to concrete (sealed type only)
Vibration resistance
10-55Hz: DA 1.5mm
Page 1 of 3
Ref: DG34 041515 JHM
www.durakoolrelays.com
Sales Department Tel: (888) 847-6552
Specifications are subject to change without notice. E&OE.
DG34
pcb / industrial power relay
Coil Data
Table 1
DC Coil
Nominal
Operating
Power
Must operate
voltage max.
(VDC)
Nominal Voltage
(VDC)
Coil Resistance
(Ω) ±10%
1003
3
10
2.25
0.30
1005
5
28
3.75
0.50
1006
6
40
4.50
0.60
1009
9
90
6.75
1012
12
160
1018
18
360
13.50
1024
24
640
18.00
2.40
1048
48
2,560
36.00
4.80
1110
110
13,445
82.50
11.00
0.93W
Max. allowable
voltage (VDC)
Must release
voltage min.
(VDC)
Coil Voltage
Code
130%
of nominal
9.00
0.90
1.20
1.80
UL Class F Coil insulation standard. (Others to special order)
AC Coil
Coil Voltage
Code
Nominal Voltage
(VAC)
Coil Resistance
(Ω) ±10%
5012
12
27
Nominal
Operating
Power
Must operate
voltage max.
(VAC)
Max. allowable
voltage (VDC)
9.00
5024
24
120
5110
110
2,360
5120
120
3,040
90.00
5220
220
13,490
165.00
3.60
18.00
1.2VA
Must release
voltage min.
(VAC)
130%
of nominal
82.50
7.20
33.00
36.00
66.00
UL Class F Coil insulation standard. (Others to special order)
Overall Dimensions - PCB Relays
Fig. 1
PCB Mounting Dimensions
Fig. 2
PCB Open
4.3 15.6
28.9
23.3
3.8
23.3
PCB Open + QC
4.3
14.0
2 or 3 - 6.4 QC
25.1
Bottom View (* see note 2 )
28.9
PCB Wiring Diagrams
Fig. 3
32.5
18.5
12.8
PCB Covered
20.0
4.3
3
20.2
24.0
27.6
Page 2 of 3
Ref: DG34 041515 JHM
www.durakoolrelays.com
All dimensions in mm
Sales Department Tel: (888) 847-6552
Bottom View
Specifications are subject to change without notice. E&OE.
DG34
pcb / industrial power relay
Overall Dimensions - Chassis Mount Relays
Fig. 4
Wiring Diagrams-Chassis Mount Relays
Fig. 5
*
QC Terminals
6.35 x 0.8 ± 0.03mm for contacts
2.8 x 0.8 ± 0.03mm for coil
All dimensions in mm
Ordering codes
Contact
Material
Type
D
G
3
4
Contact
arrangement
-
Cover protection and
mounting
-
Coil code
-
Contact Material
10
-
AgCdO
(30A/20A)
30
-
AgSnO2 (40A/30A)
see Table 1
(RoHS Compliant)
Contact Arrangement
11
-
SPDT ( 1 Changeover)
21
-
SPST-NO (1 Normally open)
Cover Protection Category
1
-
No cover (open frame). Not available with Terminal Option 6
3
-
Covered, sealed. IP67
7
-
Covered, dust cover
Terminations and mounting
0
-
PCB + QC Terminals for contacts (open frame only)
5
-
PCB only (no QC Terminals)
6
-
Chassis mounting QC terminals for contacts and coil
Notes:
1) All parameters, unless otherwise specified, are measured at an ambient temperature of 23°C.
2) PCB Mounting Holes - the “
* ” hole is not needed for the SPST-NO version.
3) At an ambient temperature of 85°C, the maximum allowable coil voltage should be reduced to 72%.
4) Electrical life obtained at resistive or inductive load at 30A/15VDC with suitable arc suppression attached and with an operating frequency of 1 op/sec.
Page 3 of 3
Ref: DG34 041515 JHM
American Electronic Components Inc., 1101 Lafayette St. Elkhart, IN46516
www.durakoolrelays.com
Sales Department Tel: (888) 847-6552
Specifications are subject to change without notice. E&OE.
Similar pages