Wall DCPSR2-12S6P5 30 watts non-isolation dc/dc converter single output Datasheet

DCPSR2 SERIES
30 Watts
Non-Isolation DC/DC Converter
Single Output
Rev A
FEATURES
Standard Product
• 3.0~5.5VDC & 4.6~36VDC Wide
Input Ranges
• RoHS & REACH Compliant
• Small Size and Low Profile
• No Minimum Load Required
• Low Standby Power
• CE Marked
Heatsink (“H” Suffix)
• Optional Heatsink for Cooling
• Pin Out Compatible with LM78XX Linear
Regulators
• Over Load, Short Circuit, and Over Temperature
Protection
• UL60950-1, EN60950-1, and IEC60950-1 Safety
Approvals
DESCRIPTION
Size: 0.55in x 0.30in
x 0.40in
Size: 1.26in x 0.32in x 0.43in
The DCPSR2 series of non-isolated DC/DC converters offers up to 30 watts of output
power in an ultra-compact package with an optional heatsink. This series consists of
single output models with wide input voltage ranges and low standby power. Each model
in this series has over load, short circuit, and over temperature protection, is RoHS &
REACH compliant, and has UL60950-1, EN60950-1, and IEC60950-1 safety approvals.
MODEL SELECTION TABLE
Input Voltage
Range
(1)
Model Number
DCPSR2-5S1P2
DCPSR2-5S1P5
DCPSR2-5S1P8
DCPSR2-5S2P5
DCPSR2-12S1P2
DCPSR2-12S1P5
DCPSR2-12S1P8
DCPSR2-12S2P5
DCPSR2-12S3P3
DCPSR2-12S5
DCPSR2-12S6P5
DCPSR2-24S9
DCPSR2-24S12
DCPSR2-24S15
3.0~5.5VDC
3.8~5.5VDC
4.6~36VDC
4.75~36VDC
6.5~36VDC
9.0~36VDC
12~36VDC
15~36VDC
18~36VDC
Output
Voltage
1.2VDC
1.5VDC
1.8VDC
2.5VDC
1.2VDC
1.5VDC
1.8VDC
2.5VDC
3.3VDC
5.0VDC
6.5VDC
9.0VDC
12VDC
15VDC
Output Current @Full Load Ripple & Noise
2A
2A
2A
2A
2A
2A
2A
2A
2A
2A
2A
2A
2A
2A
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
75mVp-p
75mVp-p
75mVp-p
Efficiency
Min. Vin.
Max. Vin.
90%
86%
91%
88%
92%
90%
95%
92%
84%
75%
86%
77%
87%
79%
89%
83%
91%
86%
94%
89%
94%
91%
95%
92%
95%
93%
96%
94%
Maximum
Capacitor Load
2500µF
2000µF
1600µF
1200µF
2500µF
2000µF
1600µF
1200µF
900µF
600µF
470µF
330µF
270µF
200µF
Output
Power
Up to 30W
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
3.0
3.8
5.0
5.0
5.5
5.5
4.6
12
36
Unit
INPUT SPECIFICATIONS
Input Voltage Range
Input Filter
OUTPUT SPECIFICATIONS
Output Voltage
Voltage Accuracy
Line Regulation
Load Regulation
Output Power
Output Current
DCPSR2-5S1P2, DCPSR2-5S1P5, and DCPSR2-5S1P8 Models
DCPSR2-5S2P5 Model
DCPSR2-12S1P2, DCPSR2-12S1P5, DCPSR2-12S1P8, DCPSR2-12S2P5
Models
DCPSR2-12S3P3 Model
DCPSR2-12S5 Model
DCPSR2-12S6P5 Model
DCPSR2-24S9 Model
DCPSR2-24S12 Model
DCPSR2-24S15 Model
4.75
6.5
9.0
12
15
18
Low Line to High Line at Full Load
No Load to Full Load
-2.0
-0.5
-1.0
50% Load Step Change
Peak Deviation
Measured by 20MHz
Bandwidth
Constant Resistive Load
Recovery Time
Vout ≤6.5V
Vout≥9.0V
Power Up
Dynamic Load Response
Ripple & Noise
Start-Up Time
Temperature Coefficient
7/10/2017
DCPSR2-24XX Models
Others
All
-0.02
12
36
12
36
12
36
24
36
24
36
24
36
Capacitor Type
See Table
+2.0
+0.5
+1.0
See Table
See Table
300
150
150
50
75
5
+0.02
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
VDC
%
%
%
mV
µS
mVp-p
mS
%/ºC
Page 1 of 5
DCPSR2 SERIES
30 Watts
Non-Isolation DC/DC Converter
Single Output
Rev A
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
PROTECTION
Short Circuit Protection
Over Load Protection
% of Iout rated, Hiccup Mode
Typ
Max
Unit
Continuous, Automatic Recovery
8
A
3.6
+150
ºC
DCPSR2-5SXX
Others
Over Temperature Protection
Internal IC Junction
ENVIRONMENTAL SPECIFICATIONS
Operating Ambient Temperature With Derating
Storage Temperature
Maximum Case Temperature
Relative Humidity
Thermal Shock
Vibration
MTBF
MIL-HDBK-217F, Full Load
GENERAL SPECIFICATIONS
Efficiency
DCPSR2-5SXX
Switching Frequency
Others
PHYSICAL SPECIFICATIONS
Weight
-40
-55
5
+100
+125
+105
95
MIL-STD-810F
MIL-STD-810F
13,520,000
ºC
ºC
ºC
%RH
Hours
See Table
1200
410
kHz
0.092oz (2.6g)
0.55in x 0.30in x 0.40in
(14mm x 7.5mm x 10.1mm)
1.26in x 0.35in x 0.43in
(32mm x 9mm x 10.9mm)
Non-Conductive Black Plastic
Silicone (UL94 V-0)
Standard Model
Dimensions (L x W x H)
Model with Heatsink (“H” Suffix)
Case Material
Potting Material
SAFETY CHARACTERISTICS
UL60950-1
EN60950-1
IEC60905-1
Safety Approvals
NOTES
1.
Heatsink is available for all models. To indicate heatsink option add “H” to the end of model number. Ex DCPSR2-5S1P2H
-Due to high output power of DCPSR2-24SXX heatsink is able to be operated at least 50ºC ambient temperature without derating when applied
input voltage does not exceed 30V. Other models can meet this condition without heatsink. Heatsink can be installed for higher operating ambient
temperature as well. For more information, please contact factory.
2. For DCPSR2-12SXX and DCPSR3-24SXX the input should install an external 22µF/50V E/C only if the input will be switched electromechanically.
CAUTION: This power module is not internally fused. An input fuse must always be used.
*Due to advances in technology, specifications subject to change without notice.
7/10/2017
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 2 of 5
Rev A
DCPSR2 SERIES
30 Watts
Non-Isolation DC/DC Converter
Single Output
DERATING CURVES
DCPSR2-12S05 Derating Curve
DCPSR2-12S05H Derating Curve
DCPSR2-24S15 Derating Curve
DCPSR2-24S15H Derating Curve
EFFICIENCY GRAPHS
7/10/2017
DCPSR2-12S05 Efficiency vs. Output Load
DCPSR2-12S05 Efficiency vs. Output Load
DCPSR2-24S15 Efficiency vs. Output Load
DCPSR2-24S15 Efficiency vs. Input Voltage
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 3 of 5
DCPSR2 SERIES
30 Watts
Non-Isolation DC/DC Converter
Single Output
Rev A
MECHANICAL DRAWINGS
Standard Models
PIN CONNECTION
PIN
DEFINE
1
+Vin
2
GND
3
+Vout
Heatsink Option (“H” Suffix)
S
PIN CONNECTION
PIN
DEFINE
1
+Vin
2
GND
3
+Vout
4
Case
5
Case
Notes:
All dimensions in inch (mm)
Tolerance: x.xx±0.02 (x.x±0.5)
x.xxx±0.01 (x.xx±0.25)
Pin pitch tolerance ±0.01 (0.25)
Pin dimension tolerance ±0.004 (0.1)
FDC
7/10/2017
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 4 of 5
DCPSR2 SERIES
30 Watts
Non-Isolation DC/DC Converter
Single Output
Rev A
MODEL NUMBER SETUP
DCPSR2
-
Series Name
5
S
1P5
H
Input Voltage
Output Quantity
Ouptut Voltage
Remote On/Off & Pin Length
5: 3.0~5.5VDC
S: Single
1P2: 1.2VDC
Blank: No Heatsink
3.8~5.5VDC
1P5: 1.5VDC
H: Heatsink
12: 4.6~36VDC
1P8: 1.8VDC
4.75~36VDC
2P5: 2.5VDC
6.5~36VDC
3P3: 3.3VDC
9.0~36VDC
05: 5VDC
24: 12~36VDC
6P5: 6.5VDC
15~36VDC
09: 9VDC
18~36VDC
12: 12VDC
15: 15VDC
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
7/10/2017
(603)778-2300
(888)597-9255
(603)778-9797
[email protected]
www.wallindustries.com
37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 5 of 5
Similar pages