ASD15H I sol at e d a n d R e gul at ed 15 WATT Open F ra me DC/DC Co n ve rte r series Wide 4:1 Input Range 9 to 36V or 18 to 75V Available High Efficiency Regulated Outputs 1500VDC Isolation Unit measures 1.5”W x 2”L x 0.45”H Integral Finned Heatsink EN60950-1 & UL60950-1 Approved Model Number Output Voltage SINGLE OUTPUT ASD15H-12S3 3.3 VDC ASD15H-48S3 ASD15H-12S5 5 VDC ASD15H-48S5 ASD15H-12S12 12 VDC ASD15H-48S12 ASD15H-12S15 15 VDC ASD15H-48S15 Output Amps Input Range 3.75 3.75 3 3 1.25 1.25 1 1 9-18VDC 20-75VDC 9-18VDC 20-75VDC 9-18VDC 20-75VDC 9-18VDC 20-75VDC DUAL OUTPUT ASD15H-12D5 +/-5 VDC +/-1.5 ASD15H-48D5 +/-1.5 ASD15H-12D12 +/-12 VDC +/-0.62 ASD15H-48D12 +/-0.62 ASD15H-12D15 +/-15 VDC +/-0.5 ASD15H-48D15 +/-0.5 WWW.ASTRODYNETDI.COM 9-18VDC 20-75VDC 9-18VDC 20-75VDC 9-18VDC 20-75VDC ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 I sol at e d a n d R e gul at ed 15 WATT Open F ra me DC/DC Co n ve rte r 12VDC 9-18 50V (12V Models), * 100V (48V Models), * 10 mS duration, min. 48VDC 20-75 VDC OUTPUT SPECIFICATIONS Voltage and Current Load Regulation 20% - FL Preset Accuracy Line Regulation Trim Range Temperature Coefficient Ripple/Noise (Note 1) Overvoltage Protection Voltage Stability Transient Response Short Circuit Protection series GENERAL SPECIFICATIONS INPUT SPECIFICATIONS Input Voltage, Nominal Input Voltage Ranges Input Surge Voltage ASD15H See Selection Chart single: +/- 0.5% duals: +/-1%, +/-3% (5V mod) single: ± 3% max. duals: ±4% max. single: +/- 0.5% duals: +/- 1% 0.5V min, 0.65V typ +/-0.01%/°C 100mV Pk-Pk, typ. Clamp, 130-150% * +/- 0.05%, max 12V: ± 4%, max 15V: ± 3%, max All others: ± 2%, max Clamp, need to release load On/Off Control Shutdown Idle Current Input-Out Isolation In/Out Capacitance Efficiency at nom. Input Switching Frequency Safety ENVIRONMENTAL SPECIFICATIONS Oper. Temperature Storage Temperature Maximum Case Temp Input Fusing MTBF Shock/Vibration * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. WWW.ASTRODYNETDI.COM -25 to +71°C(FL) -40 to +125°C * 110°C * 12V: 4A, 48V: 2A 1,000,000 Hrs Mil Std 217, 25°C To MIL-STD 810°C PHYSICAL SPECIFICATIONS Heatsink Material Construction Weight All specifications are typical at nominal input, full load, and 25°C unless otherwise noted (Ref to - Input pin) Logic “1”/Open=ON Logic “0”/GND=OFF 15mA 1500VDC (48V) 500 VDC (12V) 1000 pF 12V: 72%-80%, typ. 48V: 80%-86%, typ. 450Khz UL/EN60950-1 2nd Edition Aluminum Open Frame .93 oz, (26g) NOTES 1. Ripple & Noise is measured by using a 20MHz bandwidth oscilloscope and terminating the output with a 47uF electrolytic capacitor paralleled with a 0.1uF ceramic capacitor. ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 ASD15H I sol at e d a n d R e gul at ed 15 WATT Open F ra me DC/DC Co n ve rte r series OUTPUT DERATING CURVE 16 14 Output Power, Watts 12 ESCRIPTION 10 8 6 4 2 0 -25 -20 -10 0 10 20 30 40 50 60 Ambient Temp, ° C 70 80 90 MECHANICAL DIMENSIONS 5 .40in 10.16mm 6 1.50in 38.1mm .60in 15.24mm .40in 10.16mm 1 2 4 .40in 10.16mm 7 .40in 10.16mm 8 .25in 6.35mm .10in 2.54mm .10in 2.54mm 1.80in 45.72mm 2.00in 50.8mm .45in 11.5mm .07in 1.8mm 0.05mm .04in 1mm 0.02mm .23in 5.84mm Tolerance : . XX 0.5mm [0.02in] . XXX 0.25mm [0.01in] PIN # Single Outputs 1 + Input - Input 2 3 No Pin Control 4 No Pin 5 + Output 6 Out.Ret. 7 8 Trim Trim Connections +V 10Kohm Pot. SHEET METAL TOLERANCE UNIT (UNLESS OTHERWISE SPECIFIED) SIZE SCALE DIMENSION PIERCING BENDING ANGULAR SHEET ±0.1 ±0.15 X<8 ±0.3° Projection ±0.1 8<X<25 ±0.2 3115 ±0.5° WWW.ASTRODYNETDI.COM 2013/01/03 DATE s from 10.16mm to 11.97mm max ges from 11.97mm to 11.5mm 2014/12/25 25<X<100 100<X<300 300<X<800 ±0.15 ±0.2 ±0.25 ±0.5° DRAWN ±0.3 ±1° CHECKED ±0.3 ±0.5 ±1.5° APPROVED mm Dual Outputs + Input - Input No Pin Control + Output Out.Ret. - Output Trim -V To Pin 8 MATERIAL A4 PART NO. 1:1 USA: 1-800-823-8082 1 OF 1ASTRODYNE MODEL NO. ASD15H ASTRODYNE PACIFIC: 886-2-26983458 TITLE 2D outline drawings E.LIU