DC/DC Converter B_XT-2WR2 Series 2W, Fixed input voltage, isolated & unregulated single output FEATURES z Efficiency up to 86% z Isolation voltage: 1.5K VDC z Operating temperature range: -40℃ to +105℃ z z z z Patent Protection RoHS Miniature SMD package Internal surface mounted design No external component required International standard pin-out B_XT-2WR2 series is specially designed for applications where an isolated voltage is required in a distributed power supply system. It is suitable for 1.Where the voltage of the input power supply is stable (voltage variation: ±10%Vin); 2.Where isolation is necessary between input and output (isolation voltage ≤1500VDC); 3.Where do not has high requirement of line regulation , load regulation and the ripple & noise of the output voltage; Such as: pure digital circuits, low frequency analog circuits, and relay-driven circuits. Selection Guide Input Voltage (VDC) Part No. Output Nominal Output Voltage Output Current (mA) (Range) (VDC) (Max./Min.) Efficiency (%,Min./Typ.) Max. Capacitive Load @ Full Load (μF) B0503XT-2WR2 3.3 400/40 68/72 B0505XT-2WR2 5 400/40 75/79 9 222/22 78/82 12 167/17 78/82 B0509XT-2WR2 B0512XT-2WR2 5 (4.5-5.5) B0515XT-2WR2 15 133/13 79/83 B1205XT-2WR2 5 400/40 75/79 9 222/22 78/82 12 167/17 78/82 15 133/13 79/83 24 83/8 80/84 15 133/13 79/83 B1209XT-2WR2 B1212XT-2WR2 B1215XT-2WR2 12 (10.8-13.2) B1224XT-2WR2 B1515XT-2WR2 15 (13.5-16.5) B2405XT-2WR2 B2412XT-2WR2 B2415XT-2WR2 24 (21.6-26.4) B2424XT-2WR2 5 400/40 75/79 12 167/17 78/82 15 133/13 79/83 24 83/8 82/86 220 Input Specifications Item Operating Conditions 5V input Input Current (full load / no-load) Surge Voltage (1sec. max.) Surge Voltage (1sec. max.) Reflected Ripple Current Input Filter Min. Typ. Max. -- 506/30 -- 12V input -- 212/25 -- 15V input -- 169/18 -- 24V input -- 105/15 -- 5V input -0.7 -- 9 12V input -0.7 -- 18 15V input -0.7 -- 21 24V input -0.7 -- 30 -- 15 -- Unit mA VDC VDC mA Capacitor filter 2014.05.22-A/1 Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation DC/DC Converter B_XT-2WR2 Series Output Specifications Item Operating Conditions Min. Output Voltage Accuracy Typ. Max. Unit See tolerance envelope graph (Fig. 1) Line Regulation Input voltage change: ±1% Load Regulation 10%-100% load 3.3VDC output -- -- ±1.5 Other output -- -- ±1.2 3.3VDC output -- 18 -- 5VDC output -- 12 -- 9VDC output -- 9 -- 12VDC output -- 8 -- 15VDC output -- 7 -- 24VDC output -- 6 -- -- % Ripple & Noise* 20MHz bandwidth -- 100 -- mVp-p Temperature Drift Coefficient 100% load -- -- ±0.03 %/°C Output Short Circuit Protection ** 5/12/15VDC input Continuous, self-recovery 24VDC input -- -- 1 s Notes: * Ripple and noise tested with “parallel cable” method, please see DC-DC Converter Application Notes for specific operation methods. **For the products of 24V Input voltage, supply voltage must be discontinued at the end of short circuit duration. General Specifications Item Operating Conditions Min. Isolation Voltage Input-output, with the test time of 1 minute and the leak current lower than 1mA 1500 -- -- VDC Isolation Resistance Input-output, isolation voltage 500VDC 1000 -- -- MΩ Isolation Capacitance Input-output, 100KHz/0.1V -- 20 -- pF -40 -- 105 -55 -- 125 -- 25 -- -- -- 300 3.3V/5V output Operating Temperature Other output Derating if the temperature ≥71°C, (see Fig. 2) Derating if the temperature ≥85°C, (see Fig. 2) Storage Temperature Casing Temperature Rise Ta=25°C Pin Welding Resistance Temperature Welding spot is 1.5mm away from the casing, 10 seconds Typ. Max. Unit °C Peak temp.≤245℃, maximum duration time≤60s at 217℃. For actual application, please refer to IPC/JEDEC J-STD-020D.1. Reflow Soldering Temperature Storage Humidity Non-condensing -- -- Switching Frequency 100% load, nominal input voltage -- 100 MTBF MIL-HDFK-217F@25°C 3500 -- 95 % 300 KHz -- K hours Physical Specifications Casing Material Black flame-retardant heat-proof epoxy resin (UL94-V0) Package Dimensions 12.70*11.20*7.25 mm Weight 1.5g (Typ.) Cooling Method Free air convection EMC Specifications EMI EMS Conducted disturbance CISPR22/EN55022 CLASS B (see Fig. 4 for recommended circuit) Radiated emission CISPR22/EN55022 CLASS B (see Fig. 4 for recommended circuit) Electrostatic discharge IEC/EN61000-4-2 Contact ±6KV perf. Criteria B 2014.05.22-A/1 Page 2 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation DC/DC Converter B_XT-2WR2 Series Product Characteristic Curve Tolerance Envelope Graph Temperat ure Derating Grap h Ty p ic a +5% Rated Output Voltage l Lo ad C u rv e O utp ut Pow er Pe rce nt (%) +10% +2.5% Output Voltage Accuracy(%) -2.5% -7.5% 50 70 100 Output Current Percentage(%) 1 20 1 00 80 60 5 0 Sa fe Op e ra t ing Are a 40 20 0 - 40 40 7 1 8 5 1 05 0 Am bi ent Te mp .(℃ ) (Nominal Input Voltage) Fig. 2 Fig. 1 Efficiency Vs Input Voltage (Full Load) 95 90 90 80 85 70 80 B0505XT-2WR2 75 70 65 Efficiency(%) 100 Efficiency(%) 100 B0505XT-2WR2 60 50 40 30 60 20 55 10 0 5.5 5.4 5.3 5.2 5.1 5 4.9 4.8 4.7 4.6 4.5 50 10 Input Voltage(V) 90 B1212XT-2WR2 80 75 70 65 60 55 40 50 60 70 80 90 100 100 90 80 70 60 50 40 30 20 10 0 B1212XT-2WR2 10 13.2 13.0 12.8 12.5 12.2 12.0 11.8 11.3 11.0 50 10.8 30 Output Current Percentage(%) Efficiency(%) 95 85 20 Efficiency Vs Output Load(Vin=12V) Efficiency Vs Input Voltage (Full Load) 100 Efficiency(%) Efficiency Vs Output Load(Vin=5V) 20 30 40 50 60 70 80 90 100 Output Current Percentage(%) Input Voltage(V) Design Reference 1. Typical application If it is required to further reduce input and output ripple, a filter capacitor can be connected to the input and output terminals, see Fig.3. Moreover, choosing suitable filter capacitor is very important, start-up problems may be caused by too large capacitance. To ensured the modules running well, the recommended capacitive load values as shown in Table 1. +Vo Vin C in DC DC GND C out 0V Fig.3 Recommended capacitive load value table (Table 1) Vin(VDC) Cin(μF) Vo (VDC) Cout(μF) 5 4.7 3.3 10 12 2.2 5 10 15 2.2 9 4.7 24 1 12 2.2 --15 1 --24 0.47 It is not recommended to connect any external capacitor when output power is less than 0.5W. 2014.05.22-A/1 Page 3 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation DC/DC Converter B_XT-2WR2 Series 2. EMC typical recommended circuit LDM Vin Vin C1 GND C2 +Vo DC/DC GND C3 LOAD 0V 5/12/15/24 4.7μF /50V 4.7μF /50V Refer to the Cout in Fig.3 -6.8μH Notes: 1. B2424XT-2WR2 is subject to CY (CY : 470pF/2KV). 2. It is not needed to add the component in the peripheral circuit when parameter with the symbol of "--". CY Fig. 4 Input voltage (VDC) C1 C2 EMI C3 CY LDM 3. Output load requirements To ensure the module work efficiently and reliably, during the operation, the min. output load should be no less than 10% of the full load. If the actual output power is low, please connect a resister to the output terminal in parallel, with a recommenced resistance which is 10% of the rated power, and derating is required during operation. 4. For more information Please find the application notes on www.mornsun-power.com Dimensions and Recommended Layout Notes: 1. Packing Information please refer to 'Product Packing Information'. Packing bag number: 58210023; 2. If the product is operated under the min. required load, the product performance cannot be guaranteed to comply with all performance indexes in this datasheet; 3. The max. capacitive load should be tested within the input voltage range and under full load conditions; 4. Unless otherwise specified, data in this datasheet should be tested under the conditions of Ta=25°C, humidity<75% when inputting nominal voltage and outputting rated load; 5. All index testing methods in this datasheet are based on our Company’s corporate standards; 6. The performance indexes of the product models listed in this manual are as above, but some indexes of non-standard model products will exceed the above-mentioned requirements, and please directly contact our technicians for specific information; 7. We can provide product customization service; 8. Specifications of this product are subject to changes without prior notice. MORNSUN Guangzhou Science & Technology Co., Ltd. Address: No. 5, Kehui St. 1, Kehui Development Center, Science Ave., Guangzhou Science City, Luogang District, Guangzhou, P. R. China Tel: 86-20-38601850-8801 Fax: 86-20-38601272 E-mail: [email protected] 2014.05.22-A/1 Page 4 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation