REVISION C DO NOT SCALE FROM THIS PRINT NOTES: ANY REVISION MADE TO THIS PRINT MUST HAVE AN UPDATED MKT PRINT 1. STANDARD PART SET UP AS ASP FOR HYPER TRANSPORT STANDARD. PLEASE NOTIFY [email protected] FOR PRICING OR DESIGNQUESTIONS. 2. C REPRESENTS A CRITICAL DIMENSION. 3. MINIMUM PUSHOUT FORCE: .75 LB. 4. PARTS TO BE PACKAGED IN TAPE & REEL.ATTACH LABEL "SEAX-0001" TO EACH TAPE & REEL PACKAGE. 5. DIMENSION C12 MUST BE MEASURED IN ALL FOUR CORNERS USING INSPECTION FIXTURE AT-1817-836-1. USE CO-AU-WI-2003-M FOR PROCESS. 6. MAXIMUM ROW TO ROW VARIATION: .003[.08]. 2.229 56.62 REF (40 POS X .050 [1.27] + .229 [5.82]) .156 3.96 REF .026 0.66 REF 1.9500 49.530 .161 4.09 REF .0500 1.270 (TYP) 3 C C .221 5.61 REF 01 1.004±.020 25.50±0.51 C 2.170 55.12 REF SOME CENTER FEATURES NOT SHOWN FOR CLARITY. C .228 5.79 REF "A" C C .040 1.02 REF .034 0.86 REF .044 1.12 REF EXCEPTIONS: PHONE No: .079 2.01 REF PRINTED NAME: CUSTOMER SIGNATURE: 'C' 1.9500 49.530 REF 2 COMPANY: .053 1.35 REF "A" 1 .238 6.05 .050 1.27 (TYP) DATE: .050 1.27 REF .256 6.50 .050 1.27 REF .044 1.12 REF 2.1400 54.356 REF NON STANDARD COMPONENT ITEM NO. PART NUMBER QUANTITY MATERIAL 1 SEAF-40-06.0-04-A 1.0000 UL 94 V0, COLOR: BLACK 2 NEW-SUB-C-209-06.0-L-2 120.00 COPPER ALLOY/LEAD FREE SOLDER 3 K-DOT-.256-.375-.005 1.0000 POLYIMIDE FILM CT-SEAF056MS 1.0000 CONDUCTIVE POLYMER ANGLES .XX: .01[.3] .XXX: .005[.13] .XXXX: .0020[.051] TOOLING 2 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 2:1 PLATING: CONTACT AREA: .000010 MIN GOLD OVER .000050 MIN NICKEL REMAINDER: .000200 REF TIN OVER .000050 MIN NICKEL PROCESS PACKAGING OTHER UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. TOLERANCES ARE: DECIMALS ASSEMBLY 4 .100 2.54 REF 04 CL .076 1.93 REF BY SIGNING THIS DOCUMENT YOU ARE ACCEPTING THE CONDITIONS SET WITHIN. YOUR REQUIREMENTS MUST BE LISTED WITHIN THIS DRAWING. WHERE NO DIRECTION FROM THE CUSTOMER IS IDENTIFIED SAMTEC'S PROCESS REQUIREMENTS WILL BE USED. C .017±.020 0.42±0.51 C LEAD FREE SOLDER X F:\dwg\misc\mktg\ASP-151798-02-06.0-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail [email protected] code 55322 DESCRIPTION: DWG. NO. .050 SOCKET ARRAY ASSEMBLY ASP-151798-02-06.0 BY: J. BROWNING 04/05/2010 SHEET 1 OF 2 REVISION C .630 16.00 REF C .035±.005 0.89±0.13 CL .035 0.90 REF 2.835 72.00 REF .017 0.42 REF B C .002±.003 0.05±0.08 (SEE NOTE 5 & 6) C 'B' USER DIRECTION OF UN-REELING POCKET NOT DETAILED .009 [0.23] 4 SECTION "B"-"B" SCALE 1 : 1.25 .011 0.28 REF .050 1.27 REF (TYP) CL B CL SECTION "A"-"A" SCALE 6 : 1 DETAIL 'C' SCALE 6 : 1 C .0175±.0030 0.445±0.076 C .0470 1.19 .0380 0.97 PROPRIETARY NOTE .0620 1.575 .0530 1.346 C DETAIL 'B' SCALE 13 : 1 THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. SHEET SCALE: 1.5:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail [email protected] code 55322 DESCRIPTION: DWG. NO. F:\dwg\misc\mktg\ASP-151798-02-06.0-MKT.SLDDRW .050 SOCKET ARRAY ASSEMBLY ASP-151798-02-06.0 BY: J. BROWNING 04/05/2010 SHEET 2 OF 2