AZ2270 30 AMP MINIATURE POWER RELAY FEATURES • • • • • • • • Quick-connect leads for contacts 1 Form A, B and C contacts available AC and DC coils available High dielectric strength version available Epoxy sealed versions available UL Class F (155°C) standard UL, CUR file E44211 TÜV pending Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 30 A 120 VAC Res. SPST (1 Form A, or B) SPDT (1 Form C) Operate Time 15 msec max. at nominal coil voltage Resistive load: Release Time Max. switched power: 840 W or 8310 VA Max. switched current: 30 A (Form A) 15 A (Form B) Max. switched voltage: 277 VAC, 28 VDC 10 msec max. at nominal coil voltage (without suppression) Dielectric Strength 1500 Vrms contact to contact 2500 Vrms contact to coil 4000 Vrms contact to coil (“T” version) CONTACTS Arrangement Ratings UL, CUR 1 Form A 30 A at 277 VAC, General Use [1][2] 2 Hp at 250 VAC [1][2] 1 HP at 125 VAC [1][2] 30 A at 28 VDC [1] 20/60 (FLA/LRA) at 277 VAC 30k cycles [1] 1 Form B 15 A at 277 VAC, General Use [1] 10 A at 28 VDC [1] 0.5 HP at 250 VAC [1] 0.25 HP at 125 VAC [1] 10/33 (FLA/LRA) at 277 VAC 30k cycles [1] 1 Form C 30/20 A (N.O./N.C.) at 277 VAC, General Use [1][2] 20/10 A (N.O./N.C.) at 28 VDC[1] 2/0.5 HP (N.O./N.C.) at 250 VAC[1][2] 1/0.25 HP (N.O./N.C.) at 125 VAC[1][2] 20/60 (FLA/LRA) at 277 VAC 30k cycles N.O. [1] 10/33 (FLA/LRA) at 277 VAC 30k cycles N.C. [1] Material Resistance GENERAL DATA (at sea level for 1 min.) Insulation Resistance 1000 megohms min. at 20°C, 500 VDC 50% RH Dropout DC: > 10% of nominal coil voltage AC: > 20% of nominal coil voltage Ambient Temperature Operating Storage -55°C (-67°F) to 85°C (185°F) -55°C (-67°F) to 155°C (311°F) Vibration 0.062" DA at 10–55 Hz Shock 10 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C., Quick Connects Note: Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force. Max. Solder Temp. 270°C (518°F) Silver cadmium oxide [1], silver tin oxide [2] Max. Solder Time 5 seconds < 50 milliohms initially (24 V, 1 A voltage drop method) Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 36 grams COIL Power At Pickup Voltage (typical) DC: 500 mW AC: 1.4 VA Max. Continuous Dissipation DC: 1.7 W at 20°C AC: 2.7 VA at 20°C Max. Temperature NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 155°C (311°F) 9/26/06W AZ2270 RELAY ORDERING DATA COIL SPECIFICATIONS – DC Coil Nominal Coil VDC 5 Must Operate VDC 3.75 Max. Continuous VDC 6.4 Nominal Current mA ± 10% 185 Coil Resistance ± 10% 27 ORDER NUMBER* AZ2270–1A–5DF 6 4.50 7.8 150 40 AZ2270–1A–6DF 9 6.75 12.2 93 97 AZ2270–1A–9DF 12 9.0 15.4 77 155 AZ2270–1A–12DF 15 11.3 19.8 59 256 AZ2270–1A–15DF 18 13.5 24.1 47 380 AZ2270–1A–18DF 24 18.0 32.0 36 660 AZ2270–1A–24DF 48 36.0 62.6 19 2,560 AZ2270–1A–48DF 70 52.0 93.0 27 5,500 AZ2270–1A–70DF 110 82.5 146.0 20 13,450 AZ2270–1A–110DF COIL SPECIFICATIONS – AC Coil 50/60 Hz Coil Resistance ± 10% 25 ORDER NUMBER* Nominal Coil VAC 12 Must Operate VAC 10.2 Max. Continuous VAC 13.8 Nominal Coil Power VA 2.3 24 20.4 27.6 2.1 100 120 102.0 138.0 2.3 2,500 AZ2270–1A–120AF 208 166.0 239.0 2.2 11,000 AZ2270–1A–208AF 220/240 187.0 276.0 2.2/2.6 13,490 AZ2270-1A–240AF 277 220.0 318.0 2.2 15,000 AZ2270-1A–277AF AZ2270–1A–12AF AZ2270–1A–24AF *Substitute “-1B” or “-1C” in place of “-1A” for 1 Form B or 1 Form C respectively. For silver tin oxide contacts substitute “-1AE” or “-1CE” in place of “-1A” or “ -1C.” Add “T” to “-1A”, “-1AE”, “-1B”, “-1C” or “-1CE” for extended life contacts. Substitute “DEF” or “AEF” in place of “DF” or “AF” for epoxy sealed version. For 4000 Vrms dielectric strength change “F” to “TF.” MECHANICAL DATA 1.083 [27.50] 1.094 [27.80] 0.130 [3.30] 0.398 [10.10] .240 [6.10] .130 [3.30] 0.299 [7.60] 1.276 [32.40] 2x .032 x .062 [0.81 x 1.57] 0.906 [23.00] 2 x .025 SQ [0.64 SQ] 0.339 [8.60] PC BOARD LAYOUT .150 [3.81] WIRING DIAGRAMS .700 [17.78] 3 x ø.082 [ ø.2.10] 1 FORM B (SPST-NC) 1 FORM A (SPST-NO) .400 [10.16] .045 SQ [1.14 SQ] .300 [7.62] 1 FORM C (SPDT) 3 .900 [22.86] 3 2 2 4 2 x ø.043 [ø1.10] 1 5 4 1 5 4 1 5 .400 [10.16] VIEWED TOWARDS TERMINALS VIEWED TOWARDS TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 9/26/06W