CXE15 Series Single output DC-DC CONVERTERS 15 W High Efficiency DC-DC Converters 1 • High efficiency topology, 87% typical at 5 V • Industry standard footprint • Wide operating temperature, up to and exceeding 65 ˚C (natural convection) • 90% to 110% output trim • No minimum load • Overvoltage protection • Remote ON/OFF control • Available RoHS compliant The CXE15 is a new high efficiency open frame isolated 15 Watt converter series in an industry standard footprint. The CXE15 features an input voltage range of 33 Vdc to 75 Vdc and are available in output voltages of 5 V and 3.3 V. The output voltage on each model is adjustable from 90% to 110% of the nominal value. Typical efficiencies for the models are 87% for the 5 V and 86% for the 3.3 V. The CXE15 series also has a remote ON/OFF capability with active high or active low logic. Overcurrent and overvoltage protection features are included as standard. With full international safety approval including EN60950 and cUL1950, the CXE15 reduces compliance costs and time to market. TÜV 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at nominal input, full load at 25 °C unless otherwise stated OUTPUT SPECIFICATIONS EMC CHARACTERISTICS Voltage adjustability 90% to 110% Total error band (See Note 11) Line regulation Low line to high line 0.1% max. Load regulation Full load to min. load 0.5% max. Minimum load ±3.5% max. 0% Overshoot None Undershoot Conducted emissions Radiated emissions Immunity: ESD air ESD contact Radiated field enclosure Conducted (dc power) Conducted (signal) Input transients EN55022 (See Note 3) Level A EN55022 (See Note 3) Level B EN55022 (See Longform datasheet) Level B EN61000-4-2 8 kV, 15 kV EN61000-4-2 6 kV, 8 kV EN61000-4-3 10 V/m EN61000-4-6 10 V EN61000-4-6 10 V (See Note 8) ETS 300 132-2, ETR 283 None Ripple and noise (See Note 1) 5 Hz to 20 MHz Transient response typ. deviation (See Note 2) 70 mV pk-pk 20 mV rms 100 mV 400 µs recovery to within total error band INPUT SPECIFICATIONS Input voltage range 48 Vin nominal Input current No load Remote OFF 35 mA max. 25 mA max. Input current (max.) (See Note 4) 0.55 A max. @ Io max. and Vin = 33-75 Vdc Input reflected ripple (See Note 6) 5 mA (pk-pk) typ. Active high remote ON/OFF Logic compatibility ON OFF 33-75 Vdc (See Note 10) Open collector ref to -input Open circuit or >2 Vdc <1.2 Vdc Undervoltage lockout Power up Power down Start-up time (See Note 7) Power up Remote ON/OFF 33 V (typ.) 30 V (typ.) GENERAL SPECIFICATIONS Efficiency See table Operational insulation Input/output Switching frequency Fixed 1500 Vdc 265 kHz typ. Approvals and standards (See Note 5) UL/cUL1950, EN60950 TÜV Rheinland Material flammability UL94V-0 Weight MTBF Representative model: 12 g (0.42 oz) MIL-HDBK-217F 3,628,000 hours 48S05J @ 48 Vin, 40 °C, 100% load ground benign BELLCORE 332 >1,500,000 hours ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 9) Operating ambient temperature Non-operating -40 °C to +65 °C -40 °C to +120 °C 1.5 ms (typ.) 2.5 ms (typ.) File Name: cxe15s.pdf Rev: 01 Mar 2006 CXE15 Series Single output DC-DC CONVERTERS 15 W High Efficiency DC-DC Converters 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT POWER (MAX.) INPUT VOLTAGE OVP OUTPUT VOLTAGE OUTPUT CURRENT (MIN.) OUTPUT CURRENT (MAX.) EFFICIENCY (TYP.) LINE LOAD MODEL NUMBER (10,12) 15 W 33-75 Vdc 4 Vdc 3.3 V 0A 4.5 A 86% 0.1% 0.5% CXE15-48S3V3-SJ 15 W 33-75 Vdc 6 Vdc 5V 0A 3A 87% 0.1% 0.5% CXE15-48S05J Notes Measured as per recommended set-up. See Application Note 116 for details. 2 di/dt = 0.1 A/µs, Vin = 48 Vdc, Tc = 25 °C, load change = 0.5 lo max. to 0.75 lo max. and 0.75 lo max. to 0.5 lo max. 3 The CXE15 meets level A and level B conducted emissions only with external components connected before the input pins to the converter. See Application Note 116 for details. 4 Recommended input fusing is a 2 A HRC 200 V rated fuse. 5 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 6 Measured with external filter. See Application Note 116 for details. 7 Start-up into resistive load. 8 Signal line assumed < 3 m in length. 9 Operating ambient temperatures are specified at natural convection. Higher operating temperatures are possible with increased airflow. See Application Note 116 for details. 10 Remote ON/OFF (pin 3) and Trim (pin 5) are currently available individually or together. The CXE-48S05J model includes pins 1, 2, 4, and 6. The CXE15-48S3V3-SJ features pin 3 with positive logic. 11 This parameter is calculated at worst case line, load, temperature and initial settings. 12 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. REGULATION PROTECTION 1 Short circuit Continuous Overvoltage Non-latching clamp TELECOM SPECIFICATION Central office interface A ETS300-132-2, input voltage and current requirements CAUTION: Hazardous internal voltages and high temperatures. Ensure that unit is not user accessible. File Name: cxe15s.pdf Rev: 01 Mar 2006 CXE15 Series Single output DC-DC CONVERTERS 15 W High Efficiency DC-DC Converters 3 For the most current data and application support visit www.artesyn.com/powergroup/products.htm TOP VIEW Dimensions in Inches [mm] 1.000 (25.40) 2.000 (50.80) 0.015 (0.38) 0.350 (8.89) SIDE VIEW 0.600 (15.24) 0.040 (1.02) 0.120 (3.05) 0.600 (15.24) 0.800 (20.32) Recommended Hole Pattern 0.800 (20.32) 0.100 (2.54) 0.800 (20.32) 0.200 (5.08) 3 Case Outline 6 4 0.400 (10.16) BOTTOM VIEW 5 1 0.400 (10.16) 0.400 (10.16) 1 .200(5.08) .560 (14.22) 5 .060 (1.52) 2 2 0.200 (5.08) 0.200 (5.08) 4 0.300 (7.62) 3 0.040 (1.016) 0.400 (10.16) 6 Standoff (4 places) 0.600 (15.24) 0.10 (2.54) Plated Through Hole 0.052-0.06 (1.321-1.40) typical PIN CONNECTIONS PIN NUMBER FEATURE 1 Vin - 2 Vin + 3 On/Off (See Note 10) 4 Vout + 5 Trim (See Note 10) 6 Vout - International Safety Standard Approvals UL/cUL 1950 3rd edition. File No. E135734 TÜV TÜV Rheinland. Certificate No. R2074133 File No. 10401-3336-0916 Datasheet © Artesyn Technologies® 2006 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: 4 Application Note 4 Longform Data Sheet www.artesyn.com File Name: cxe15s.pdf Rev: 01 Mar 2006