ER201 - ER206 SUPER FAST RECOVERY RECTIFIER DIODES VOLTAGE RANGE: 100 - 600V CURRENT: 2.0 A Features ! Low cost ! Low leakage ! Low forward voltage drop ! High current capability B A A ! Easily cleaned with alcohol,Isopropanol and similar solvents Mechanical Data C D ! Case : DO-15 Molded plastic ! Epoxy : UL94V-O rate flame retardant Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed ! Polarity : Color band denotes cathode end ! Mounting position : Any ! Weight : 0.465 gram DO-15 Dim Min A 25.40 Max — B 5.50 7.62 C 0.686 0.889 D 2.60 3.60 All Dimensions in mm Maximum Ratings and Electrical Characteristics TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forw ard rectified current 9.5mm lead length, @TA=75 Symbol ER201 ER202 ER203 ER204 ER206 Unit VRRM 100 200 300 400 600 V VRMS 70 140 210 280 420 V VDC 100 200 300 400 600 V IF(AV) 2.0 A IFSM 50.0 A Peak forw ard surge current 8.3ms single half-sine-w ave superimposed on rated load @TJ=125 Maximum instantaneous forw ard voltage @ 2.0A Maximum reverse current @TA=25 at rated DC blocking voltage @TA=100 VF 0.95 1.25 5.0 IR 200.0 1.7 V A Maximum reverse recovery time (Note 1) trr 35 ns Typical junction capacitance (Note 2) CJ 62 pF Typical thermal resistance (Note 3) RθJA 40 TJ - 55 ----- + 150 TSTG - 55 ----- + 150 Operating junction temperature range Storage temperature range ／Ｗ NOTE: 1. Measured with IF=0.5A, IR=1A, Irr=0.25A. 2. Measured at 1.0MHz and applied rev erse v oltage of 4.0V DC. 3.Thermal resistance junction to ambient. 1 of 2 www.sunmate.tw FIG.1 -- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC 50 N 1. trr 10 N 1. +0.5A D.U.T. (+) 25VDC (approx) (-) 0 OSCILLOSCOPE (NOTE 1) 1 NONINDUCTIVE PULSE GENERATOR (NOTE2) -0.25A -1.0A 1cm SET TIME BASE FOR 10/20 ns/cm NOTES:1.RISE TIME = 7ns MAX.INPUT IMPEDANCE = 1M .22pF. JJJJJ2.RISE TIME =10ns MAX.SOURCE IMPEDANCE=50 . FIG.3 -- FORWARD DERATING CURVE AVERAGE FORWARD CURRENT AMPERES 3.0 CURRENT, AMPERES INSTANTANEOUS FORWARD FIG.2 -- TYPICAL FORWARD CHARACTERISTIC ER203 ER204 ER201 - ER202 2.0 ER206 1.0 TJ =25 Pulse Width=300 µ s 0.1 0 0.4 0.8 1.2 1.6 2.0 2.4 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 100 60 40 20 10 6 4 2 1 TJ=25 f=1.0MHz 0.1 0.2 0.4 1 2 4 10 20 40 Single Phase Half Wave 60H Z Resistive or Inductive Load 0.375"(9.5mm)Lead Length 2.0 1.6 1.2 0.8 0.4 0 25 50 75 100 125 175 150 AMBIENT TEMPERATURE, FIG.5 -- PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT,AMPERES JUNCTION CAPACITANCE,pF FIG.4 -- TYPICAL JUNCTION CAPACITANCE 2.4 z 100 REVERSE VOLTAGE,VOLTS 60 50 8.3ms Single Half Sine-Wave 40 30 20 10 0 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz CURRENT,MICROAMPERES INSTANTANEOUS REVERSE FIG.6 -- TYPICAL REVERSE CHARACTERISTICS 1000 100 T J =100 10 T J =75 TJ=25 1.0 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. 2 of 2 www.sunmate.tw