DC AXIAL FAN 40x40x10mm FAD1-04010 Series Features: Motor: Brushless DC Motor Protection: Impedance Protected Bearing Type: Two Ball, 1B1S, Sleeve, or Hydro Dynamic Connection: UL 1007 AWG 26, 300mm Wire Leads Frame Material: Plastic UL94V-0 Impeller Material: Plastic UL94V-0 Operating Temp: Two Ball: -10°C~70°C 1B1S: -10°C~70°C Sleeve: -10°C~60°C Hydro Dynamic: -10°C~70°C Life Expectancy: Two Ball: 70,000 Hours 1B1S: 50,000 Hours Sleeve: 30,000 Hours Hydro Dynamic: 50,000 Hours Fan-S Division Model No. Volt. Current Power Rated Speed (VDC) (A) (W) (rpm) Maximum AirFlow (CMM) (CFM) Maximum Static Pressure (InAq) (mmAq) Noise Level (dB/A) Weight (g) FAD1-04010B * AW11 5 0.050 0.25 3300 0.093 3.300 0.044 1.117 14.0 17.0 FAD1-04010B * LW11 5 0.070 0.35 4200 0.119 4.200 0.060 1.524 21.0 17.0 FAD1-04010B * MW11 5 0.110 0.55 4800 0.142 5.000 0.078 1.981 22.0 17.0 FAD1-04010B * HW11 FAD1-04010B * JW11 5 0.160 0.80 6000 0.175 6.200 0.100 2.540 26.0 17.0 5 0.190 0.95 6800 0.198 7.000 0.170 4.318 29.0 17.0 FAD1-04010C * AW11 FAD1-04010C * LW11 12 0.040 0.48 3300 0.093 3.300 0.044 1.117 14.0 17.0 12 0.060 0.72 4200 0.119 4.200 0.060 1.524 21.0 17.0 FAD1-04010C * MW11 FAD1-04010C * HW11 12 0.060 0.72 4800 0.142 5.000 0.078 1.981 22.0 17.0 12 0.090 1.08 6000 0.175 6.200 0.100 2.540 26.0 17.0 FAD1-04010C * JW11 FAD1-04010D * AW11 12 0.090 1.08 6800 0.198 7.000 0.170 4.318 29.0 17.0 24 0.020 0.48 3300 0.093 3.300 0.044 1.117 14.0 17.0 FAD1-04010D * LW11 FAD1-04010D * MW11 24 0.030 0.72 4200 0.119 4.200 0.060 1.524 21.0 17.0 24 0.040 0.96 4800 0.142 5.000 0.078 1.981 22.0 17.0 FAD1-04010D * HW11 FAD1-04010D * JW11 24 0.060 1.44 6000 0.175 6.200 0.100 2.540 26.0 17.0 24 0.080 1.92 6800 0.198 7.000 0.170 4.318 29.0 17.0 * Indicates “B” (Ball Bearing), “A” (1B1S), “S” (Sleeve), or “H” (Hydro Dynamic) Noise is measured at the distance of one (1) meter from the axis of intake. A J ISO-9001 Company Qualtek Electronics Corporation www.qualtekusa.com