Proven Reliabilit y AG SERIES ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS 100V to 6000V @ 1.0 and 1.5 Watts Extremely Low Profile: 0.128 inches and volume of < 0.100 cubic inches PRODUCT SELECTION TABLE *5 VDC UL NOW IZED N G O REC PRODUCT DESCRIPTION The AG Series is a new line of ultra-miniature DC to HV DC converters that set an industry standard in high voltage miniaturization. These component-sized converters are ideal for applications requiring minimal size and weight. Occupying less than one tenth of a cubic inch of volume*5, this unique package features an extremely low profile of only 0.128 inches (3.25mm) when mounted in from the top, or 0.152 (3.86mm) when mounted in from the bottom of the PCB! The AG Series converter can also mount off the PCB with .030” diameter pins. See page 9 for illustrations. Controllable output voltages range from 100 volts to 6000 volts. Please refer to the A Series data sheet for PCB pin mounting. 1.5 WATT OPTION AGH MODEL STANDARD 1 WATT AG MODEL MODEL MAXIMUM OUTPUT CURRENT*1 MODEL MAXIMUM OUTPUT CURRENT*1 100 VDC AG01 10 mA AGH01*7 15 mA 200 VDC AG02 5 mA AGH02 7.5 mA 250 VDC AG025 4 mA AGH025 6 mA 300 VDC AG03 3.33 mA AGH03 5mA 400 VDC AG04 2.5 mA AGH04 3.75 mA 500 VDC AG05 2 mA AGH05 3 mA 600 VDC AG06 1.67 mA AGH06 2.5 mA 700 VDC AG07 1.43 mA AGH07 2.15 mA 800 VDC AG08 1.25 mA AGH08 1.87 mA 900 VDC AG09 1.1 mA AGH09 1.67 mA 1000 VDC AG10 1 mA AGH10 1.5 mA 1200 VDC AG12 0.83 mA AGH12 1.25 mA 1500 VDC AG15 0.66 mA AGH15 1 mA 2000 VDC AG20 0.5 mA AGH20 0.75 mA 3000 VDC AG30 0.32 mA AGH30 0.5 mA 4000 VDC AG40 0.24 mA – – 5000 VDC AG50 0.2 mA – – 6000 VDC AG60 0.167 mA AGH60 0.25 mA Complete List of Models on page 2 APPLICATIONS Avalanche Photodiodes Capacitor Charging Electrophoresis Photomultiplier Tubes Piezo Devices Mass Spectrometry Sustaining Ion Pumps OPTIONS 1 Watt and 1.5 Watt Versions Available (AG/AGH) Available in 3 Standard Input Voltage Ranges: 0 to 5, 12 or 24VDC (up to 3 kV) Polarity: Choose Positive or Negative Output (P/N) Extended Operating Temperature (AG Models / 1.0W) (T Suffix) Alternate Input / Output Voltages (Consult Factory) See Ordering Information (Page 12) WWW.XPPOWER.COM FEATURES • • • • • • • • • • • • • Proportional Input/Output Low Noise Quasi-sinewave Oscillator Control Pin (can be used for on/off control) Low Leakage Current Low Input/Output Capacitance Input to Output Galvanic Isolation Short Circuit Protection, 1 Minute Minimum No Minimum Load Required*2 MTBF > 1,862,000 hours, per Bellcore TR 332 Surface Mount Package No external components required RoHS Compliant UL Recognized E344664 4718L02 PAGE 1 AG SERIES ELECTRICAL SPECIFICATIONS*3 STANDARD 1 WATT - AG MODEL OUTPUT VOLTAGE* 2 1.5 WATT OPTION - AGH MODEL (To select polarity, see pg. 12 - How to Order) MODEL MAXIMUM OUTPUT CURRENT*1 RIPPLE P-P*4 MODEL MAXIMUM OUTPUT CURRENT*1 RIPPLE P-P*4 0 to 100 VDC AG01 10 mA 5% AGH01*7 15 mA 4% 0 to 200 VDC AG02 5 mA 1% AGH02 7.5 mA 3% 0 to 250 VDC AG025 4 mA .90% AGH025 6 mA 1.2% 0 to 300 VDC AG03 3.33 mA .70% AGH03 5 mA .70% 0 to 400 VDC AG04 2.5mA .50% AGH04 3.75 mA .75% 0 to 500 VDC AG05 2 mA .50% AGH05 3 mA .70% 0 to 600 VDC AG06 1.67 mA 1% AGH06 2.5 mA 2% 0 to 700 VDC AG07 1.43 mA .50% AGH07 2.15 mA 1.2% 0 to 800 VDC AG08 1.25 mA 1% AGH08 1.87 mA 1.2% 0 to 900 VDC AG09 1.1 mA 1% AGH09 1.67 mA 1.2% 0 to 1000 VDC AG10 1 mA .79% AGH10 1.5 mA 1% 0 to 1200 VDC AG12 0.83 mA .50% AGH12 1.25 mA .60% 0 to 1500 VDC AG15 0.67 mA .40% AGH15 1 mA .60% 0 to 2000 VDC AG20 0.5 mA .30% AGH20 0.75 mA .50% 0 to 3000 VDC AG30 0.33 mA .20% AGH30 0.5 mA .20% 0 to 4000 VDC AG40 0.25 mA .12% – – – 0 to 5000 VDC AG50 0.2 mA .15% – – – 0 to 6000 VDC AG60 0.167 mA .15% AGH60 0.25 mA .25% INPUT CURRENT AG MODELS - 1 Watt AGH MODELS - 1.5 Watt VIN NO-LOAD FULL-LOAD NO-LOAD FULL-LOAD 5 VDC <200mA <470mA <300mA <550mA 12 VDC <100mA <185mA <125mA <250mA 24 VDC <25mA <60mA <40mA <120mA WWW.XPPOWER.COM 4718L02 PAGE 2 AG SERIES ELECTRICAL SPECIFICATIONS*3 PARAMETER VALUE 0 TO 5, 12, OR 24V (FOR MODELS UP TO 3KV) INPUT VOLTAGE 0 TO 5V (FOR MODELS OVER 3KV) TURN-ON VOLTAGE <0.7 VDC ISOLATION < +/- 500V BIAS ON PIN 4 OUTPUT VOLTAGE TOLERANCE +10%, -10% FULL LOAD, MAX. INPUT VOLTAGE INPUT/OUTPUT COUPLING CAPACITANCE <250 pf TYPICAL INPUT/OUTPUT LEAKAGE CURRENT <100 nA TYPICAL CONTROL PIN 0 TO MAX INPUT VOLTAGE INTERNAL OSCILLATOR FREQUENCY 50kHz - 350kHz OPERATING: -25° TO +75°C*6 (CASE) STANDARD TEMPERATURE RANGES STORAGE: -55° TO +105°C EXTENDED TEMPERATURE RANGES (-T OPTION) OPERATING: -55° TO +85°C*6 (CASE) (AG Models/1.0W) STORAGE: -55° TO +105°C DETAILED PRODUCT DESCRIPTION The AG Series is a new line of ultra-miniature, DC to HV DC converters that set an industry standard in high voltage miniaturization. These component-sized converters are ideal for applications requiring minimal size and weight. Occupying less than one tenth of a cubic inch of volume*5, this unique package features an extremely low profile of only 0.128 inches (3.25mm) when mounted in from the top, or 0.152 (3.86mm) when mounted in from the bottom of the PCB! The AG Series converter can also mount off the PCB with .030” diameter pins. See page 9 for illustrations. Controllable output voltages range from 100 volts to 6000 volts. Turn-on voltage is very low at less than 0.7 volts, allowing for wide output voltage operating range. Use of a resonant, quasi-sinewave oscillator and fully shielded transformer result in clean, reliable high voltage conversion with inherently low ripple, EMI/RFI and input ripple current, making this product ideal for integration into noise sensitive equipment. Output power is 1 watt standard, with 1.5 watts available as an option. No minimum load is required. A proprietary vacuum encapsulation process and custom 94V-0 listed, high performance formula are used to achieve excellent high voltage and thermal properties. Isolation is +/- 500V bias on the output return. Input to output leakage current is very low at less than 100 nA and coupling capacitance is also low at <250 pF. The AG Series leverages XP EMCO’s Best-in-Class long-term reliability, utilizing proven DC to high voltage DC conversion technology, perfected by over four decades of high voltage design experience in the most demanding applications. Our extensive in-house capabilities enable us to meet specific customer requirements with standard, modified and custom solutions quickly, easily, and economically. Technical assistance is readily available. A separate high impedance control pin is standard and is designed for external error amplifier and/or DAC control in closed or open loop systems, or simply connect the control pin to the + input for proportional input to output operation (see performance charts below). WWW.XPPOWER.COM 4718L02 PAGE 3 AG SERIES & AGH SERIES MECHANICAL SPECIFICATIONS (100V - 2,000V) TOP VIEW RECOMMENDED PCB LAYOUT TOP VIEW AG Series BOTTOM VIEW DIMENSIONS ARE IN INCHES (METRIC EQUIVALENTS ARE IN PARENTHESIS) DIMENSIONAL TOLERANCES: .XX = +- 0.02 (0.51), .XXX = +- 0.005 ( 0.127) PARAMETER VALUE PIN # FUNCTION WEIGHT < 0.20 OZ. (5.66 GRAMS) 1 (–) INPUT VOLUME < 0.10 CUBIC INCHES (1.639 CUBIC CENTIMETERS) 2 (+) INPUT BODY DIMENSIONS 0.92L (23.37L) x 0.45W (11.43W) x 0.25H (6.35H) 3 HV OUT BODY + WING DIMENSIONS 0.92L (23.37L) x 0.69W (17.53W) x 0.25H (6.35H) 4 HV RTN 5 CONTROL WWW.XPPOWER.COM 4718L02 PAGE 4 AG SERIES & AGH SERIES MECHANICAL SPECIFICATIONS (3,000V – 5,000V) TOP VIEW RECOMMENDED PCB LAYOUT TOP VIEW AG Series BOTTOM VIEW DIMENSIONS ARE IN INCHES (METRIC EQUIVALENTS ARE IN PARENTHESIS) DIMENSIONAL TOLERANCES: .XX = +- 0.02 (0.51), .XXX = +- 0.005 ( 0.127) PARAMETER VALUE PIN # FUNCTION WEIGHT 0.25 OZ. (7.09 GRAMS) 1 (–) INPUT VOLUME <0.125 CUBIC INCHES (2.048 CUBIC CENTIMETERS) 2 (+) INPUT BODY DIMENSIONS 1.13L (28.70L) x 0.45W (11.43W) x 0.25H (6.35H) 3 HV OUT BODY + WING DIMENSIONS 1.13L (28.70L) x 0.69W (17.53W) x 0.25H (6.35H) 4 HV RTN 5 CONTROL WWW.XPPOWER.COM 4718L02 PAGE 5 AG SERIES & AGH SERIES MECHANICAL SPECIFICATIONS (6,000V) TOP VIEW RECOMMENDED PCB LAYOUT TOP VIEW AG Series BOTTOM VIEW DIMENSIONS ARE IN INCHES (METRIC EQUIVALENTS ARE IN PARENTHESIS) DIMENSIONAL TOLERANCES: .XX = +- 0.02 (0.51), .XXX = +- 0.005 ( 0.127) PARAMETER VALUE PIN # FUNCTION WEIGHT 0.3 OZ (8.51 GRAMS) 1 (–) INPUT VOLUME <0.156 CUBIC INCHES (2.556 CUBIC CENTIMETERS) 2 (+) INPUT BODY DIMENSIONS 1.32L (33.53L) x 0.45W (11.43W) x 0.25H (6.35H) 3 HV OUT BODY + WING DIMENSIONS 1.32L (33.53L) x 0.69W (17.53W) x 0.25H (6.35H) 4 HV RTN 5 CONTROL WWW.XPPOWER.COM 4718L02 PAGE 6 AG SERIES AG INSTALLATION AG Mounted on Top of PCB AG Mounted From Bottom of PCB AG Mounted Off PCB With .030” DIA Pins *Height of pin can vary depending upon application WWW.XPPOWER.COM 4718L02 PAGE 7 AG SERIES AG RoHS REFLOW PROFILE Reflow Results Probe (°C) Module Lead Top Positive Slope (°C/sec) Positive Slope Time (mm:ss.tt) Rise Time (120.0 - 180.0°C) (mm:ss.tt) Mean Slope to Peak (°C/sec) Time Above Liquidus (217.0°C) (mm:ss.tt) Peak Temperature (°C) Negative Slope (°C/sec) 2.62 03:43.50 01:17.00 0.77 00:44.00 237.5 -2.59 Maximum / Minimum Probe (°C) Module Lead Top Maximum (°C) Max. Reached (mm:ss.tt) Mean (°C) Deviation from 255.0°C Standard deviation Minimum (°C) Min. Reached (mm:ss.tt) 237.5 04:18.00 139.8 -17.5 56.5 38.5 00:00.00 Time at Temperature Probe (°C) Module Lead Top Slopes Time Above 230.0°C (mm:ss.tt) Time to Reach 230.0°C (mm:ss.tt) Positive Slope (°C/sec) Mean Slope (°C/sec) 00:16.00 04:09.50 2.62 0.38 *Reflow profile is subject to change based on your application WWW.XPPOWER.COM 4718L02 PAGE 8 AG SERIES APPLICATION NOTES Typical HV Output vs. Control Voltage 300 Full Load Output No Load Output (AG) No Load Output (AGH) Safe Operating Limit 250 % HV Output 200 150 100 50 0 0 10 20 30 40 50 60 70 80 90 100 % Control Voltage NOTE: Vin held at maximum TYPICAL INPUT vs. OUTPUT VOLTAGE 100 loaded unloaded (AG) 90 unloaded (AGH) 80 % OUTPUT VOLTAGE 70 60 50 40 30 20 10 0 0 10 20 30 40 50 60 70 80 90 100 % INPUT VOLTAGE NOTE: Control Pin tied to Vin Pin Output Voltage is load dependent. Under light or no-load conditions, reduce the Input Voltage so maximum rated Output Voltage is not exceeded. WWW.XPPOWER.COM 4718L02 PAGE 9 AG SERIES OPTION CODES ORDERING INFORMATION OUTPUT VOLTAGE POLARITY DESIGNATOR INPUT VOLTAGE OPTIONS ORDER CODE AVAILABILITY 1 WATT AG ALL 1.5 WATT AGH ALL POSITIVE OUTPUT P ALL NEGATIVE OUTPUT N ALL 5 VDC 5 ALL/Except AGH01 Model 12 VDC 12 UP TO 3KV 24 VDC 24 UP TO 3KV EXTENDED TEMP T AG MODELS/1W HOW TO ORDER PART NUMBER SELECTOR: Model Number: AG 20 N - 12 T T - Extended Operating Temperature 12 - Input Voltage N - Polarity Designator AG - Model 20 - Output Voltage/100 (See table) EXAMPLE: AG20N-12T (AG - Model, 20 - Output Voltage, N - Negative, 12 - Input Voltage, T - Extended Operating Temperature) *Note: 1. At maximum rated output voltage. 2. Output Voltage is load dependent. Under light or no-load conditions, reduce the Input Voltage so maximum rated Output Voltage is not exceeded. 3. Specifications after 30 minute warm-up, full-load, at 25ºC, unless otherwise noted. 4. Ripple may be reduced substantially by the addition of an external RC filter. 5. Volume will vary depending on package size. 6. Proper thermal management techniques are required to maintain safe case temperature at maximum power output. 7. The AGH01 is only available in 12V or 24V. XP EMCO reserves the right to make changes on products and literature, including specifications, without notice. XP EMCO standard product models are not recommended for “copy-exact” applications or any other application restricting product changes. “Copy-exact” options are available. Please contact an XP EMCO sales representative for more details. WWW.XPPOWER.COM 4718L02 PAGE 10