Aluminum electrolytic capacitors Snap-in capacitors Series/Type: B43634 Date: October 2015 © EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. Snap-in capacitors B43634 Long useful life, ultra compact 85 °C Long-life grade capacitors Applications Frequency converters Solar inverters Uninterruptible power supplies Professional power supplies Medical appliances Features Voltage derating (0.93 VR) enables 105 °C operation, more details available upon request Extremly high C/V product, ultra compact Long useful life High reliability High ripple current capability Different case sizes available for each capacitance value Capacitors with all insulation versions pass the needle flame test according to IEC 60695-11-5 for all flame exposure times up to 120 s RoHS-compatible Construction Charge/discharge-proof, polar Aluminum case, fully insulated with PVC Version with PET insulation available Version with additional PET insulation cap on terminal side available for insulating the capacitor from the PCB Snap-in solder pins to hold component in place on PC-board Minus pole marking on case surface Minus pole not insulated from case Overload protection by safety vent on the base Terminals Standard version with 2 terminals, 2 lengths available: 6.3 and 4.5 mm 3 terminals to ensure correct insertion: length 4.5 mm Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 20 B43634 Long useful life, ultra compact 85 °C Specifications and characteristics in brief Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance Dissipation factor tan δ (20 °C, 120 Hz) 200 ... 450 V DC 1.15 VR (for VR ≤ 250 V DC) 1.10 VR (for VR ≥ 400 V DC) 82 ... 2700 µF ±20% M VR ≤ 250 V DC: tan δ ≤ 0.15 VR ≥ 400 V DC: tan δ ≤ 0.20 Leakage current Ileak (5 min, 20 °C) Self-inductance ESL Approx. 20 nH Useful life1) 85 °C; VR; IAC,R > 8000 h Voltage endurance test 85 °C; VR 4000 h Vibration resistance test Characteristics at low temperature Requirements: ∆C/C ≤ 20% of initial value tan δ ≤ 2 times initial specified limit Ileak ≤ initial specified limit Post test requirements: ∆C/C ≤ 10% of initial value tan δ ≤ 1.3 times initial specified limit Ileak ≤ initial specified limit To IEC 60068-2-6, test Fc: Frequency range 10 Hz ... 55 Hz, displacement amplitude 0.35 mm, acceleration max. 5 g, duration 3 × 2 h. Capacitor mounted by its body which is rigidly clamped to the work surface. Max. impedance VR ≤ 250 V ≥ 400 V ratio at 100 Hz Z -25 °C / Z 20 °C 4 5 Z -40 °C / Z 20 °C 7 14 IEC climatic category To IEC 60068-1: VR ≤ 250 V DC: 40/085/56 (40 °C/+85 °C/56 days damp heat test) VR ≥ 400 V DC: 25/085/56 (25 °C/+85 °C/56 days damp heat test) The capacitors can be operated in the temperature range of 40 °C to +85 °C but the impedance at 40 °C should be taken into consideration. Detail specification Sectional specification Similar to CECC 30301-811 IEC 60384-4 1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life. Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 20 B43634 Long useful life, ultra compact 85 °C Dimensional drawings Snap-in capacitors with standard insulation (PVC or PET) Snap-in terminals, length (6.3 ±1) mm. Also available in a shorter version with a length of (4.5 1) mm. PET insulation is marked with label "PET" on the sleeve. Safety vent on the base. Snap-in capacitors are also available with 3 terminals (length (4.5 1) mm). PET insulation is marked with label "PET" on the sleeve. Safety vent on the base. Dimensions (mm) d +1 l ±2 22 25 22 30 22 35 22 40 22 45 22 50 25 25 25 30 25 35 25 40 25 45 25 50 25 55 Dimensions (mm) d +1 l ±2 30 25 30 30 30 35 30 40 30 45 30 50 30 55 35 25 35 30 35 35 35 40 35 45 35 50 35 55 Approx. weight (g) 9 12 15 18 20 24 13 17 19 22 25 29 32 Please read Cautions and warnings and Important notes at the end of this document. Packing units (pcs.) 160 160 160 160 160 160 130 130 130 130 130 130 130 Page 4 of 20 Approx. weight (g) 17 23 29 36 41 46 53 22 29 36 41 56 70 81 Packing units (pcs.) 80 80 80 80 80 80 80 60 60 60 60 60 60 60 B43634 Long useful life, ultra compact 85 °C Snap-in capacitors with PVC insulation and PET insulation cap on terminal side Snap-in terminals, length (6.3 +1/1.4) mm. Also available in a shorter version with a length of (4.5 1.4) mm. PET insulation cap is positioned under the insulation sleeve. Safety vent on the base. Snap-in capacitors are also available with 3 terminals (length (4.5 1.4) mm). PET insulation cap is positioned under the insulation sleeve. Safety vent on the base. Dimensions (mm) d +1.4 l +2.2/2 22 25 22 30 22 35 22 40 22 45 22 50 25 25 25 30 25 35 25 40 25 45 25 50 25 55 Dimensions (mm) d +1.4 l +2.2/2 30 25 30 30 30 35 30 40 30 45 30 50 30 55 35 25 35 30 35 35 35 40 35 45 35 50 35 55 Approx. Packing weight (g) units (pcs.) 9 12 15 18 20 24 13 17 19 22 25 29 32 Please read Cautions and warnings and Important notes at the end of this document. 160 160 160 160 160 160 115 115 115 115 115 115 115 Page 5 of 20 Approx. Packing weight (g) units (pcs.) 17 23 29 36 41 46 53 22 29 36 41 56 70 81 80 80 80 80 80 80 80 60 60 60 60 60 60 60 B43634 Long useful life, ultra compact 85 °C Packing of snap-in capacitors For ecological reasons the packing is pure cardboard. Components can be withdrawn (in full or in part) in the correct position for insertion. Ordering codes for terminal styles and insulation features Identification in 3rd block of ordering code Snap-in capacitors Terminal version Insulation version PVC PET PVC plus PET cap Standard terminals 6.3 mm M000 M060 M080 Short terminals 4.5 mm M007 M067 M087 3 terminals 4.5 mm M002 M062 M082 Ordering examples: B43634A5107M007 B43634A5107M062 B43634A5107M080 } } } snap-in capacitor with short terminals and standard PVC insulation snap-in capacitor with 3 terminals and PET insulation snap-in capacitor with standard terminals and PVC insulation with additional PET insulation cap on terminal side Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 20 B43634 Long useful life, ultra compact 85 °C Overview of available types VR (V DC) 200 250 400 450 Case dimensions d × l (mm) CR (µF) 22 × 25 82 100 22 × 25 22 × 30 120 22 × 30 22 × 30 25 × 25 150 22 × 30 25 × 25 22 × 35 25 × 30 180 22 × 35 25 × 30 22 × 40 25 × 35 30 × 25 220 22 × 40 25 × 35 30 × 25 22 × 50 25 × 40 30 × 30 35 × 25 22 × 25 22 × 45 25 × 40 30 × 30 35 × 25 25 × 45 30 × 35 35 × 30 270 330 22 × 25 22 × 30 25 × 25 25 × 45 30 × 35 35 × 25 25 × 50 30 × 40 35 × 30 390 22 × 30 22 × 35 25 × 30 25 × 50 30 × 35 35 × 30 30 × 45 35 × 35 470 22 × 30 25 × 25 22 × 40 25 × 30 25 × 55 30 × 40 35 × 35 30 × 50 35 × 40 560 22 × 35 25 × 30 22 × 40 25 × 35 30 × 25 30 × 45 35 × 35 30 × 55 35 × 45 680 22 × 40 25 × 35 30 × 25 22 × 50 25 × 40 30 × 30 35 × 25 30 × 55 35 × 40 35 × 50 820 22 × 45 25 × 35 30 × 30 25 × 45 30 × 35 35 × 30 35 × 50 Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 20 B43634 Long useful life, ultra compact 85 °C VR (V DC) 200 250 400 450 Case dimensions d × l (mm) CR (µF) 1000 25 × 45 30 × 30 35 × 25 25 × 50 30 × 40 35 × 30 1200 25 × 50 30 × 35 35 × 30 30 × 45 35 × 35 1500 30 × 40 35 × 35 30 × 50 35 × 40 1800 30 × 50 35 × 40 35 × 45 2200 30 × 55 35 × 45 35 × 55 2700 35 × 50 35 × 55 The capacitance and voltage ratings listed above are available in different cases upon request. Other voltage and capacitance ratings are also available upon request. Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 20 B43634 Long useful life, ultra compact 85 °C Technical data and ordering codes CR 100 Hz 20 °C µF Case dimensions d×l mm VR = 200 V DC 330 22 × 25 390 22 × 30 470 22 × 30 470 25 × 25 560 22 × 35 560 25 × 30 680 22 × 40 680 25 × 35 680 30 × 25 820 22 × 45 820 25 × 35 820 30 × 30 1000 25 × 45 1000 30 × 30 1000 35 × 25 1200 25 × 50 1200 30 × 35 1200 35 × 30 1500 30 × 40 1500 35 × 35 1800 30 × 50 1800 35 × 40 2200 30 × 55 2200 35 × 45 2700 35 × 50 ESRtyp 100 Hz 20 °C mΩ 280 230 200 200 160 170 140 140 160 110 120 130 95 110 130 80 90 100 75 85 60 70 50 60 50 ESRtyp 300 Hz 60 °C mΩ 90 75 65 75 55 60 45 50 70 40 45 55 36 55 75 30 45 55 38 45 28 40 26 34 32 Zmax 10 kHz 20 °C mΩ 400 340 290 300 240 250 200 210 240 170 180 190 140 170 200 120 140 160 120 130 95 110 80 95 80 Composition of ordering code * = Insulation feature #= 0 = PVC insulation 6 = PET insulation 8 = PVC insulation with additional PET insulation cap on terminal side Please read Cautions and warnings and Important notes at the end of this document. IAC,max 100 Hz 60 °C A IAC,R 100 Hz 85 °C A Ordering code (composition see below) 2.74 3.11 3.50 3.33 4.00 3.83 4.63 4.43 3.93 5.35 4.91 4.60 5.86 4.92 4.36 6.70 5.68 5.27 6.72 6.12 8.00 6.94 9.09 7.83 8.81 1.53 1.74 1.95 1.86 2.24 2.14 2.59 2.48 2.19 2.98 2.74 2.57 3.28 2.74 2.43 3.74 3.17 3.07 3.91 3.57 4.67 4.05 5.29 4.56 5.13 B43634A2337M0*# B43634A2397M0*# B43634A2477M0*# B43634B2477M0*# B43634A2567M0*# B43634B2567M0*# B43634A2687M0*# B43634B2687M0*# B43634C2687M0*# B43634A2827M0*# B43634B2827M0*# B43634C2827M0*# B43634A2108M0*# B43634B2108M0*# B43634C2108M0*# B43634A2128M0*# B43634B2128M0*# B43634C2128M0*# B43634A2158M0*# B43634B2158M0*# B43634A2188M0*# B43634B2188M0*# B43634A2228M0*# B43634B2228M0*# B43634A2278M0*# Terminal style 0 = snap-in standard terminals (6.3 mm) 2 = snap-in 3 terminals (4.5 mm) 7 = snap-in short terminals (4.5 mm) Page 9 of 20 B43634 Long useful life, ultra compact 85 °C Technical data and ordering codes CR 100 Hz 20 °C µF Case dimensions d×l mm VR = 250 V DC 270 22 × 25 330 22 × 30 330 25 × 25 390 22 × 35 390 25 × 30 470 22 × 40 470 25 × 30 560 22 × 40 560 25 × 35 560 30 × 25 680 22 × 50 680 25 × 40 680 30 × 30 680 35 × 25 820 25 × 45 820 30 × 35 820 35 × 30 1000 25 × 50 1000 30 × 40 1000 35 × 30 1200 30 × 45 1200 35 × 35 1500 30 × 50 1500 35 × 40 1800 35 × 45 2200 35 × 55 ESRtyp 100 Hz 20 °C mΩ 280 230 240 200 200 160 170 140 140 160 110 120 130 150 100 110 120 80 90 110 75 85 60 70 60 50 ESRtyp 300 Hz 60 °C mΩ 95 75 85 65 70 55 65 50 50 75 38 45 60 75 38 45 60 32 40 60 34 50 30 40 36 28 Zmax 10 kHz 20 °C mΩ 400 330 340 280 280 230 240 200 200 240 160 170 190 220 140 160 180 120 130 160 110 130 95 110 95 75 Composition of ordering code * = Insulation feature #= 0 = PVC insulation 6 = PET insulation 8 = PVC insulation with additional PET insulation cap on terminal side Please read Cautions and warnings and Important notes at the end of this document. IAC,max 100 Hz 60 °C A IAC,R 100 Hz 85 °C A Ordering code (composition see below) 2.56 2.97 2.89 3.38 3.29 3.89 3.66 4.38 4.18 3.75 5.16 4.83 4.38 4.05 5.54 5.04 4.75 6.41 5.79 4.98 6.57 5.74 7.58 6.59 7.42 8.82 1.44 1.66 1.62 1.90 1.85 2.18 2.05 2.45 2.34 2.10 2.89 2.71 2.45 2.27 3.10 2.83 2.84 3.59 3.45 2.97 3.92 3.42 4.51 3.93 4.42 5.26 B43634E2277M0*# B43634E2337M0*# B43634F2337M0*# B43634E2397M0*# B43634F2397M0*# B43634E2477M0*# B43634F2477M0*# B43634E2567M0*# B43634F2567M0*# B43634G2567M0*# B43634E2687M0*# B43634F2687M0*# B43634G2687M0*# B43634H2687M0*# B43634E2827M0*# B43634F2827M0*# B43634G2827M0*# B43634E2108M0*# B43634F2108M0*# B43634G2108M0*# B43634E2128M0*# B43634F2128M0*# B43634E2158M0*# B43634F2158M0*# B43634E2188M0*# B43634E2228M0*# Terminal style 0 = snap-in standard terminals (6.3 mm) 2 = snap-in 3 terminals (4.5 mm) 7 = snap-in short terminals (4.5 mm) Page 10 of 20 B43634 Long useful life, ultra compact 85 °C Technical data and ordering codes CR 100 Hz 20 °C µF Case dimensions d×l mm VR = 400 V DC 100 22 × 25 120 22 × 30 150 22 × 30 150 25 × 25 180 22 × 35 180 25 × 30 220 22 × 40 220 25 × 35 220 30 × 25 270 22 × 45 270 25 × 40 270 30 × 30 270 35 × 25 330 25 × 45 330 30 × 35 330 35 × 25 390 25 × 50 390 30 × 35 390 35 × 30 470 25 × 55 470 30 × 40 470 35 × 35 560 30 × 45 560 35 × 35 680 30 × 55 680 35 × 40 820 35 × 50 1000 35 × 55 ESRtyp 100 Hz 20 °C mΩ ESRtyp 300 Hz 60 °C mΩ Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A IAC,R 100 Hz 85 °C A Ordering code (composition see below) 1100 890 710 720 590 600 490 490 500 400 400 410 420 330 330 360 280 290 300 230 240 250 200 210 160 180 140 120 270 220 180 190 150 160 130 130 150 100 110 120 130 90 95 120 75 85 100 65 75 80 60 75 50 65 50 43 1700 1400 1100 1100 900 910 740 740 770 600 610 620 650 500 510 560 420 440 460 350 370 380 310 330 260 280 230 190 1.53 1.74 2.03 2.02 2.33 2.30 2.72 2.66 2.61 3.19 3.10 3.02 2.99 3.60 3.48 3.25 4.11 3.83 3.80 4.74 4.48 4.35 5.11 4.72 5.98 5.40 6.35 7.25 0.86 0.98 1.14 1.13 1.30 1.29 1.52 1.49 1.45 1.78 1.73 1.69 1.67 2.02 1.95 1.81 2.30 2.14 2.22 2.65 2.61 2.54 2.97 2.75 3.49 3.15 3.71 4.22 B43634A9107M0*# B43634A9127M0*# B43634A9157M0*# B43634B9157M0*# B43634A9187M0*# B43634B9187M0*# B43634A9227M0*# B43634B9227M0*# B43634C9227M0*# B43634A9277M0*# B43634B9277M0*# B43634C9277M0*# B43634D9277M0*# B43634A9337M0*# B43634B9337M0*# B43634C9337M0*# B43634A9397M0*# B43634B9397M0*# B43634C9397M0*# B43634A9477M0*# B43634B9477M0*# B43634C9477M0*# B43634A9567M0*# B43634B9567M0*# B43634A9687M0*# B43634B9687M0*# B43634A9827M0*# B43634A9108M0*# Composition of ordering code * = Insulation feature #= 0 = PVC insulation 6 = PET insulation 8 = PVC insulation with additional PET insulation cap on terminal side Please read Cautions and warnings and Important notes at the end of this document. Terminal style 0 = snap-in standard terminals (6.3 mm) 2 = snap-in 3 terminals (4.5 mm) 7 = snap-in short terminals (4.5 mm) Page 11 of 20 B43634 Long useful life, ultra compact 85 °C Technical data and ordering codes CR 100 Hz 20 °C µF Case dimensions d×l mm VR = 450 V DC 82 22 × 25 100 22 × 30 120 22 × 30 120 25 × 25 150 22 × 35 150 25 × 30 180 22 × 40 180 25 × 35 180 30 × 25 220 22 × 50 220 25 × 40 220 30 × 30 220 35 × 25 270 25 × 45 270 30 × 35 270 35 × 30 330 25 × 50 330 30 × 40 330 35 × 30 390 30 × 45 390 35 × 35 470 30 × 50 470 35 × 40 560 30 × 55 560 35 × 45 680 35 × 50 ESRtyp 100 Hz 20 °C mΩ ESRtyp 300 Hz 60 °C mΩ Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A IAC,R 100 Hz 85 °C A Ordering code (composition see below) 1300 1000 870 880 700 700 580 580 600 480 480 490 500 390 400 400 320 330 340 280 290 230 240 200 200 170 320 260 220 230 180 180 150 150 170 120 120 140 150 100 110 120 85 90 110 80 90 65 75 55 65 55 2000 1600 1400 1400 1100 1100 880 890 920 720 730 750 770 600 610 620 490 500 530 420 440 360 370 300 310 260 1.37 1.57 1.79 1.79 2.11 2.09 2.43 2.39 2.36 2.86 2.77 2.72 2.72 3.23 3.14 3.14 3.77 3.62 3.47 4.10 3.93 4.69 4.47 5.35 5.05 5.77 0.78 0.90 1.02 1.01 1.20 1.19 1.38 1.36 1.34 1.63 1.57 1.54 1.54 1.84 1.79 1.90 2.14 2.19 2.10 2.48 2.37 2.84 2.70 3.23 3.05 3.48 B43634A5826M0*# B43634A5107M0*# B43634A5127M0*# B43634B5127M0*# B43634A5157M0*# B43634B5157M0*# B43634A5187M0*# B43634B5187M0*# B43634C5187M0*# B43634A5227M0*# B43634B5227M0*# B43634C5227M0*# B43634D5227M0*# B43634A5277M0*# B43634B5277M0*# B43634C5277M0*# B43634A5337M0*# B43634B5337M0*# B43634C5337M0*# B43634A5397M0*# B43634B5397M0*# B43634A5477M0*# B43634B5477M0*# B43634A5567M0*# B43634B5567M0*# B43634A5687M0*# Composition of ordering code * = Insulation feature #= 0 = PVC insulation 6 = PET insulation 8 = PVC insulation with additional PET insulation cap on terminal side Please read Cautions and warnings and Important notes at the end of this document. Terminal style 0 = snap-in standard terminals (6.3 mm) 2 = snap-in 3 terminals (4.5 mm) 7 = snap-in short terminals (4.5 mm) Page 12 of 20 B43634 Long useful life, ultra compact 85 °C Useful life1) For useful life calculations, please use our web-based "AlCap Useful Life Calculation Tool", which can be found on the Internet under the following link http://www.epcos.com/designtools/alu_useful_life/Useful_life.swf. The AlCap Useful Life Calculation Tool provides calculations of useful life as well as additional data for selected capacitor types under operating conditions defined by the user. Frequency characteristics of ESR Typical behavior Impedance Z versus frequency f Typical behavior at 20 °C 1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life. Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 20 B43634 Long useful life, ultra compact 85 °C Cautions and warnings Personal safety The electrolytes used by EPCOS have been optimized both with a view to the intended application and with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide (DMAC). Furthermore, some of the high-voltage electrolytes used by EPCOS are self-extinguishing. As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no alternative materials are currently known. However, the amount of dangerous materials used in our products is limited to an absolute minimum. Materials and chemicals used in EPCOS aluminum electrolytic capacitors are continuously adapted in compliance with the EPCOS Corporate Environmental Policy and the latest EU regulations and guidelines such as RoHS, REACH/SVHC, GADSL, and ELV. MDS (Material Data Sheets) are available on the EPCOS website for all types listed in the data book. MDS for customer specific capacitors are available upon request. MSDS (Material Safety Data Sheets) are available for all of our electrolytes upon request. Nevertheless, the following rules should be observed when handling aluminum electrolytic capacitors: No electrolyte should come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected areas immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid inhaling electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water. Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 20 B43634 Long useful life, ultra compact 85 °C Product safety The table below summarizes the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of chapter "General technical information". Topic Polarity Reverse voltage Mounting position of screwterminal capacitors Robustness of terminals Mounting of single-ended capacitors Soldering Soldering, cleaning agents Upper category temperature Passive flammability Safety information Reference chapter "General technical information" Make sure that polar capacitors are connected 1 with the right polarity. "Basic construction of aluminum electrolytic capacitors" Voltages of opposite polarity should be prevented 3.1.6 by connecting a diode. "Reverse voltage" Screw terminal capacitors must not be mounted 11.1. with terminals facing down unless otherwise "Mounting positions of specified. capacitors with screw terminals" The following maximum tightening torques must 11.3 not be exceeded when connecting screw "Mounting torques" terminals: M5: 2.5 Nm M6: 4.0 Nm The internal structure of single-ended capacitors 11.4 might be damaged if excessive force is applied to "Mounting the lead wires. considerations for Avoid any compressive, tensile or flexural stress. single-ended capacitors" Do not move the capacitor after soldering to PC board. Do not pick up the PC board by the soldered capacitor. Do not insert the capacitor on the PC board with a hole space different to the lead space specified. Do not exceed the specified time or temperature 11.5 limits during soldering. "Soldering" Do not allow halogenated hydrocarbons to come 11.6 into contact with aluminum electrolytic capacitors. "Cleaning agents" Do not exceed the upper category temperature. 7.2 "Maximum permissible operating temperature" Avoid external energy, e.g. fire. 8.1 "Passive flammability" Please read Cautions and warnings and Important notes at the end of this document. Page 15 of 20 B43634 Long useful life, ultra compact 85 °C Topic Safety information Active flammability Maintenance Avoid overload of the capacitors. Storage Make periodic inspections of the capacitors. Before the inspection, make sure that the power supply is turned off and carefully discharge the electricity of the capacitors. Do not apply excessive mechanical stress to the capacitor terminals when mounting. Do not store capacitors at high temperatures or high humidity. Capacitors should be stored at +5 to +35 °C and a relative humidity of ≤ 75%. Breakdown strength Do not damage the insulating sleeve, especially of insulating when ring clips are used for mounting. sleeves Reference chapter "General technical information" 8.2 "Active flammability" 10 "Maintenance" 7.3 "Shelf life and storage conditions" Reference chapter "Capacitors with screw terminals" "Screw terminals accessories" Display of ordering codes for EPCOS products The ordering code for one and the same product can be represented differently in data sheets, data books, other publications and the website of EPCOS, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet under www.epcos.com/orderingcodes. Please read Cautions and warnings and Important notes at the end of this document. Page 16 of 20 B43634 Long useful life, ultra compact 85 °C Symbols and terms Symbol English German C CR CS CS,T Cf d dmax ESL ESR ESRf Capacitance Rated capacitance Series capacitance Series capacitance at temperature T Capacitance at frequency f Case diameter, nominal dimension Maximum case diameter Self-inductance Equivalent series resistance Equivalent series resistance at frequency f Equivalent series resistance at temperature T Frequency Current Alternating current (ripple current) Root-mean-square value of alternating current Ripple current at frequency f Maximum permissible ripple current Rated ripple current Leakage current Operating leakage current Case length, nominal dimension Maximum case length (without terminals and mounting stud) Resistance Insulation resistance Balancing resistance Temperature Temperature difference Ambient temperature Case temperature Capacitor base temperature Time Period Service life (operating hours) Kapazität Nennkapazität Serienkapazität Serienkapazität bei Temperatur T Kapazität bei Frequenz f Gehäusedurchmesser, Nennmaß Maximaler Gehäusedurchmesser Eigeninduktivität Ersatzserienwiderstand Ersatzserienwiderstand bei Frequenz f ESRT f I IAC IAC,RMS IAC,f IAC,max IAC,R Ileak Ileak,op l lmax R Rins Rsymm T ∆T TA TC TB t ∆t tb Please read Cautions and warnings and Important notes at the end of this document. Ersatzserienwiderstand bei Temperatur T Frequenz Strom Wechselstrom Wechselstrom, Effektivwert Wechselstrom bei Frequenz f Maximal zulässiger Wechselstrom Nennwechselstrom Reststrom Betriebsreststrom Gehäuselänge, Nennmaß Maximale Gehäuselänge (ohne Anschlüsse und Gewindebolzen) Widerstand Isolationswiderstand Symmetrierwiderstand Temperatur Temperaturdifferenz Umgebungstemperatur Gehäusetemperatur Temperatur des Gehäusebodens Zeit Zeitraum Brauchbarkeitsdauer (Betriebszeit) Page 17 of 20 B43634 Long useful life, ultra compact 85 °C Symbol V VF Vop VR VS XC XL Z ZT tan δ λ ε0 εr ω English Voltage Forming voltage Operating voltage Rated voltage, DC voltage Surge voltage Capacitive reactance Inductive reactance Impedance Impedance at temperature T Dissipation factor Failure rate Absolute permittivity Relative permittivity Angular velocity; 2 π f German Spannung Formierspannung Betriebsspannung Nennspannung, Gleichspannung Spitzenspannung Kapazitiver Blindwiderstand Induktiver Blindwiderstand Scheinwiderstand Scheinwiderstand bei Temperatur T Verlustfaktor Ausfallrate Elektrische Feldkonstante Dielektrizitätszahl Kreisfrequenz; 2 π f Note All dimensions are given in mm. Please read Cautions and warnings and Important notes at the end of this document. Page 18 of 20 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). Page 19 of 20 Important notes 7. The trade names EPCOS, Alu-X, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. Page 20 of 20