CCM01 MK I CCM01 MK I connectors have fixed contacts and a blade card detection switch unsealed. These connectors are intended for applications where the card usage is relatively low and the environment is benign. Features • Available with 8 through hole contacts. • A normally closed blade switch detects when the card is fully inserted. • Snap in boardlocks hold the connector in place prior to soldering. Construction Contacts Plating Copper alloy Contact area : Gold over nickel Terminals : Tin lead (2µ min) Thermoplastic UL 94V-0 rated Copper alloy Moldings Card detection switch Mechanical Data Number of Contacts Mechanical life Card insertion force Card extraction force Contact force Vibration 8 10,000 cycles min 10 N max 1 N min / 10N max 0.20 N min / 0.60 N max Frequency 10 to 500 Hz. Acceleration 50m/s2 Duration 6 hours - amplitude 0.35 mm (0.014) Max electrical discontinuity 1µs Peak value 500 m/s2 – Duration 11 ms 3 shocks in each direction of each axis Max electrical discontinuity 1 µs Shock Contact Electrical Data Insulation resistance Resistance Current rating Dielectric strength 1,000 MΩ min 100 mΩ max 10 µA min / 1 A max 750 Vrms min Switch Electrical Data Card detection switch Contact resistance Dielectric strength Current rating Maximum power Normally closed 100 mΩ max 250 Vrms min 1 mA min /10 mA max 0.2 VA Environmental Data Operating temperature Soldering temperature Damp heat Salt mist Card detection switch -40°C to +85°C Wave : 260°C / 5 sec IEC 512 test number 11c (10 days) IEC 512 test number 11f (96 hours) Not sealed blade switch Ordering Code Part Number CCM01-1NF Number of Contacts 8 Packaging Multiple 200 Packaging 20 per tray, 10 trays per box. Dimensions are shown in mm Dimensions subject to change www.ittcannon.com 6 CCM01 MK I Dimensional Drawings CCM01-1NF A-A 6,5 A 0,9±0,25 15,4 10 B 20 19,05 10 40 50,3 (REF.) 19,05 Card stop 40 (REF.) Pick and place area ø13 62±0,2 54,3 4,0 2,0 3,65±0,3 Card entry 62 (REF.) 6,5 Embossed Channel Card insertion direction 1 4,8±0,2 A 10x 0,3 A B 3,2 3,81 3x 2,54 12,7 22,08 4 Snap Feet 0,6 58 A PCB Layout CCM01-1NF SW C1 C2 C3 C4 SW 19,05 0 10 2 20 Contact location according to ISO 7816-2 Card end travel switch terminal 3,81 3,81 19,05 10 58 22,08 24,62 27,16 29,7 33,51 Plastic outline 9,38 0 (Component side) C5C6C7C8 10x +0,1 ø1 0 4x ø0,1 ø0,1 ø3,2+0,1 0 Unless otherwise stated, tolerances are ± 0,10 mm Dimensions are shown in mm Dimensions subject to change www.ittcannon.com 7