October 28, 2011 SMD INDUCTOR DR354-1 SERIES Features SMD Chip Inductor, Low Profile Suitable for High Frequency Application Inductance Range from 1.6nH to 390nH Operating Temp. -40°C to +125°C Tinned Leads with Leaded Solder is Available (note 6) ELECTRICAL SPECIFICATIONS AT 25ºC 900MHz Part Number L(nH) @250MHz Tolerance DR354-1-162-T DR354-1-182-T DR354-1-362-T DR354-1-392-T DR354-1-432-T DR354-1-472-T DR354-1-512-T DR354-1-682-T DR354-1-752-T DR354-1-872-T DR354-1-952-T DR354-1-103-T DR354-1-113-T DR354-1-123-T DR354-1-153-T DR354-1-163-T DR354-1-183-T DR354-1-223-T DR354-1-243-T DR354-1-273-T DR354-1-303-T DR354-1-333-T DR354-1-363-T DR354-1-393-T DR354-1-433-T DR354-1-473-T DR354-1-563-T DR354-1-683-T DR354-1-723-T DR354-1-823-T DR354-1-104-T DR354-1-114-T DR354-1-124-T DR354-1-154-T DR354-1-184-T DR354-1-224-T DR354-1-274-T DR354-1-390-K 1.6 1.8 3.6 3.9 4.3 4.7 5.1 6.8 7.5 8.7 9.5 10 11 12 15 16 18 22 24 27 30 33 36 39 43 47@200MHz 56@200MHz 68@200MHz 72@150MHz 82@150MHz 100@150MHz 110@150MHz 120@150MHz 150@150MHz 180@100MHz 220@100MHz 270@100MHz 390@100MHz 20, 10 20, 10 20, 10 20, 10, 5 20, 10, 5 20, 10, 5 20, 10, 5 20, 10, 5 20, 10, 5 20, 10, 5 20, 10, 5 10, 5, 2 10, 5, 2 10, 5, 2 10, 5, 2 10, 5, 2 10, 5, 2 10, 5, 2 10, 5, 2 10, 5, 2 10, 5, 2 10, 5, 2 10, 5, 2 10, 5, 2 10, 5, 2 10, 5, 2 20, 10, 5 20, 10, 5 20, 10, 5 20, 10, 5 20, 10, 5 20, 10, 5 20, 10, 5 20, 10, 5 20, 10, 5 20, 10, 5 20, 10, 5 10 L Typ. 1.67 1.63 3.72 3.95 4.32 4.72 4.93 6.75 7.70 8.86 9.70 10.0 11.0 12.3 15.4 16.2 18.7 22.8 24.5 29.2 31.4 36.0 39.4 42.7 14.0 52.2 62.5 80.5 82.0 96.2 124 138 166 250 305 480 980 Q Typ. 1.7GHz L Typ. 49 1.65 35 1.66 53 3.71 49 3.96 50 4.33 47 4.75 47 4.95 60 7.10 60 7.82 62 9.32 59 9.92 66 10.6 53 11.5 72 13.5 64 16.8 55 17.3 70 21.4 73 26.1 45 28.7 74 34.6 47 39.9 67 49.5 47 52.7 60 60.2 44 64.9 62 77.2 52 97.0 54 168 53 135 54 177 49 43 39 25 22 8 4 22 Min @100 MHz Q Typ. 63 50 65 67 70 57 56 81 65 68 61 83 56 83 89 52 69 71 39 65 28 42 24 40 21 35 26 21 20 21 - SRF (MHz) Min. 12500 12500 5900 6900 5900 5800 5700 5800 4800 4600 5400 4800 4000 4000 4000 3300 3100 3000 2650 2800 2250 2300 2080 2200 2000 2000 1900 1700 1700 1700 1400 1350 1300 990 990 900 520 400 DCR (Ohm) Max. 0.030 0.045 0.063 0.080 0.063 0.116 0.140 0.110 0.106 0.109 0.135 0.130 0.086 0.130 0.170 0.104 0.170 0.190 0.135 0.220 0.144 0.220 0.250 0.250 0.280 0.280 0.310 0.340 0.490 0.540 0.580 0.610 0.650 0.920 1.250 1.900 2.300 2.2 Idc (A) Max. 0.700 0.700 0.700 0.700 0.700 0.700 0.700 0.700 0.700 0.700 0.700 0.700 0.700 0.700 0.700 0.700 0.700 0.700 0.700 0.600 0.600 0.600 0.600 0.600 0.600 0.600 0.600 0.600 0.400 0.400 0.400 0.300 0.300 0.280 0.240 0.200 0.170 0.150 INDUCTANCE TOLERANCE: WHEN ORDERING, PLEASE SPECIFY THE TOLERANCE. -T (M=±20%, K=±10%, J=±5%, G=±2%) DATATRONIC: 28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice. Page 1 of 2 October 28, 2011 MECHANICAL OUTLINES Q VS FREQUENCY RESPONSE Ls VS FREQUENCY RESPONSE Notes: 1. All dimensions are shown in millimeter “mm” 2. General tolerance 0.1mm, unless other specified 3. Tape and reel quantity, 4000 pcs/reel 4. Terminal finish is compliant to RoHS requirements and is gold plated 5. Solder in accordance with J-STD-002 Rev. D 6. Non-RoHS series parts 42-354-1-XXX are finished with leaded solder Sn60Pb40 or equivalent DATATRONIC: 28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice Page 2 of 2