EL5130, EL5131 ® Data Sheet PRELIMINARY October 25, 2004 500MHz Low Noise Amplifiers Features The EL5130 and EL5131 are ultra-low voltage noise, high speed voltage feedback amplifiers that are ideal for applications requiring low voltage noise, including communications and imaging. These devices offer extremely low power consumption for exceptional noise performance. Stable at gains as low as 5, these devices offer 100mA of drive performance. Not only do these devices find perfect application in high gain applications, they maintain their performance down to lower gain settings. • 500MHz -3dB bandwidth These amplifiers are available in small package options (SOT-23) as well as the industry-standard SO packages. All parts are specified for operation over the -40°C to +85°C temperature range. Ordering Information PART NUMBER FN7381.2 • Ultra low noise 1.8nV/√Hz • 350V/µs slew rate • Low supply current = 4mA • Single supplies from 5V to 12V • Dual supplies from ±2.5V to ±5V • Fast disable on the EL5130 • Low cost • Pb-Free Available (RoHS Compliant) Applications • Imaging PACKAGE TAPE & REEL PKG. DWG. # EL5130IS 8-Pin SO - MDP0027 EL5130IS-T7 8-Pin SO 7” MDP0027 EL5130IS-T13 8-Pin SO 13” MDP0027 EL5130ISZ (See Note) 8-Pin SO (Pb-free) - MDP0027 EL5130ISZ-T7 (See Note) 8-Pin SO (Pb-free) 7” MDP0027 EL5130ISZT13 (See Note) 8-Pin SO (Pb-free) 13” MDP0027 EL5131IW-T7 5-Pin SOT-23 7” (3K pcs) MDP0038 EL5131IW-T7A 5-Pin SOT-23 7” (250 pcs) MDP0038 EL5131IWZ-T7 (See Note) 5-Pin SOT-23 (Pb-free) 7” (3K pcs) MDP0038 EL5131IWZT7A (See Note) 5-Pin SOT-23 (Pb-free) 7” (250 pcs) MDP0038 • Instrumentation • Communications devices Pinouts EL5130 (8-PIN SO) TOP VIEW NC 1 IN- 2 IN+ 3 8 CE + VS- 4 1 6 OUT 5 NC EL5131 (5-PIN SOT-23) TOP VIEW OUT 1 NOTE: Intersil Pb-free products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020C. 7 VS+ VS- 2 IN+ 3 5 VS+ + 4 IN- CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright © Intersil Americas Inc. 2003-2004. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc. All other trademarks mentioned are the property of their respective owners. EL5130, EL5131 Absolute Maximum Ratings (TA = 25°C) Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-65°C to +125°C Ambient Operating Temperature . . . . . . . . . . . . . . . .-40°C to +85°C Operating Junction Temperature . . . . . . . . . . . . . . . . . . . . . . +125°C Supply Voltage from VS+ to VS- . . . . . . . . . . . . . . . . . . . . . . . 13.2V IIN-, IIN+, CE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±5mA Continuous Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . 100mA Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Curves CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests are at the specified temperature and are pulsed tests, therefore: TJ = TC = TA Electrical Specifications PARAMETER VS+ = +5V, VS- = -5V, RL = 150Ω, RF = 900Ω, RG = 100Ω, TA = 25°C, unless otherwise specified. DESCRIPTION CONDITIONS MIN TYP MAX UNIT -0.9 0.2 0.9 mV VOS Offset Voltage TCVOS Offset Voltage Temperature Coefficient Measured from TMIN to TMAX IB Input Bias Current VIN = 0V 1.5 2.27 3.3 µA IOS Input Offset Current VIN = 0V -500 100 500 nA TCIOS Input Bias Current Temperature Coefficient Measured from TMIN to TMAX PSRR Power Supply Rejection Ratio VS = ±4.75V to ±5.25V CMRR Common Mode Rejection Ratio CMIR 0.8 µV/°C -3 nA/°C 75 90 dB VIN = ±3.0V 95 110 dB Common Mode Input Range Guaranteed by CMRR test ±3 ±3.3 V RIN Input Resistance Common mode 5 20 MΩ CIN Input Capacitance 1 pF IS Supply Current AVOL Open Loop Gain VO Output Voltage Swing 3.0 3.54 4.1 mA VOUT = ±2.5V, RL = 1kΩ to GND 10 16 kV/V RL = 1kΩ, RF = 900Ω, RG = 100Ω ±3.5 ±3.8 V RL = 150Ω ±3.5 ±3.3 mV 50 100 mA ISC Short Circuit Current RL = 10Ω BW -3dB Bandwidth AV = +5, RL = 1kΩ 500 MHz BW ±0.1dB Bandwidth AV = +5, RL = 1kΩ 60 MHz GBWP Gain Bandwidth Product 1500 MHz PM Phase Margin RL = 1kΩ, CL = 6pF 55 ° SR Slew Rate VS = ±5V, RL = 150Ω, VOUT = ±2.5V 350 V/µs tR, tF Rise Time, Fall Time ±0.1VSTEP TBD ns OS Overshoot ±0.1VSTEP TBD % tPD Propagation Delay ±0.1VSTEP TBD ns tS 0.01% Settling Time 14 ns dG Differential Gain AV = +2, RF = 1kΩ 0.01 % dP Differential Phase AV = +2, RF = 1kΩ 0.01 ° eN Input Noise Voltage f = 10kHz 1.8 nV/√Hz iN Input Noise Current f = 10kHz 1.1 pA/√Hz 2 225 EL5130, EL5131 Typical Performance Curves 5 SUPPLY=±5.0V 3.64mA RL=500Ω CL=2.5pF AV=+20 RG=200Ω 4 3 2 1 NORMALIZED GAIN (dB) NORMALIZED GAIN (dB) 5 12pF 8.2pF 5.6pF 0 -1 -2 0pF -3 -4 4 3 2 RL=500Ω CL=2.2pF AV=+20 RG=200Ω 1 ±5.0V 0 ±4.0V ±3.0V ±2.0V -1 -2 -3 ±1.7V -4 -5 100K 1M 100M 10M -5 100K 500M 1M FREQUENCY (Hz) FIGURE 2. GAIN vs FREQUENCY FOR VARIOUS SUPPLY VOLTAGES 2 5 RL=500Ω CIN-=0pF AV=+20 RG=200Ω NORMALIZED GAIN (dB) NORMALIZED GAIN (dB) 5 3 56pF 33pF 1 18pF 0 8.2pF -1 -2 -3 2.2pF -4 4 3 2 RL=500Ω CL=2.4pF AV=+5 RG=50Ω 1 0 ±2 ±3 ±4 ±5 ±6 -1 -2 -3 -4 -5 100K 1M 100M 10M -5 100K 500M 1M FREQUENCY (Hz) 5 RL=500Ω CL=2.2pF AV=+5 RG=50Ω 8.2pF NORMALIZED GAIN (dB) NORMALIZED GAIN (dB) 2 500M FIGURE 4. FREQUENCY vs GAIN FOR VARIOUS SUPPLY VOLTAGES 5 3 100M 10M FREQUENCY (Hz) FIGURE 3. GAIN vs FREQUENCY FOR VARIOUS CL 4 500M FREQUENCY (Hz) FIGURE 1. GAIN vs FREQUENCY FOR VARIOUS CIN- 4 100M 10M 5.6pF 2.5pF 1 0 -1 0pF -2 -3 -4 -5 100K 4 3 CL=2.5pF AV=+5 RG=50Ω 2 700Ω 1 500Ω 0 -1 -2 200Ω -3 -4 1M 10M 100M 700M FREQUENCY (Hz) FIGURE 5. GAIN vs FREQUENCY FOR VARIOUS CIN- 3 -5 100K 1M 10M 100M 700M FREQUENCY (Hz) FIGURE 6. GAIN vs FREQUENCY FOR VARIOUS RL EL5130, EL5131 Typical Performance Curves (Continued) 4 3 5 AV=+20 CL=2.5pF RG=200Ω NORMALIZED GAIN (dB) NORMALIZED GAIN (dB) 5 2 1 715Ω 0 500Ω -1 200Ω -2 -3 4 3 AV=+5 RL=500Ω RG=200Ω 2 12pF 1 0 8.2pF 2.5pF -1 -2 -3 -4 -4 -5 100K -5 100K 1M 100M 10M 500M 27pF 18pF 1M FREQUENCY (Hz) FIGURE 7. GAIN vs FREQUENCY FOR VARIOUS RL 5 CL=2.2pF AV=+10 RG=100Ω 12pF NORMALIZED GAIN (dB) NORMALIZED GAIN (dB) 3 8.2pF 5.6pF 2 1 0 -1 2.2pF -2 0pF -3 -4 4 3 CL=2.5pF AV=+10 RG=100Ω 2 1 700Ω 0 500Ω -1 -2 200Ω -3 -4 -5 100K 1M 100M 10M -5 100K 500M 1M FREQUENCY (Hz) 5 CL=2.5pF AV=+10 RL=500Ω RG=100Ω NORMALIZED GAIN (dB) NORMALIZED GAIN (dB) 2 500M FIGURE 10. GAIN vs FREQUENCY FOR VARIOUS RL 5 3 100M 10M FREQUENCY (Hz) FIGURE 9. GAIN vs FREQUENCY FOR VARIOUS CIN- 4 500M FIGURE 8. FREQUENCY vs GAIN FOR VARIOUS CL 5 4 100M 10M FREQUENCY (Hz) 1 0 -1 ±1.7 SUPPLY= ±2.0 ±3.0 ±4.0 ±5.0 ±6.0 -2 -3 -4 -5 100K 1M 10M 100M 3 2 CL=2.2pF AV=+10 RL=500Ω RG=100Ω 35pF 27pF 18pF 12pF 1 0 8.2pF -1 2.5pF -2 -3 -4 500M FREQUENCY (Hz) FIGURE 11. GAIN vs FREQUENCY FOR VARIOUS VS+, VS- 4 4 -5 100K 1M 10M 100M 500M FREQUENCY (Hz) FIGURE 12. GAIN vs FREQUENCY FOR VARIOUS RL EL5130, EL5131 Typical Performance Curves (Continued) -10 AV=+2 VS=±5V -10 -40 PSRR (dB) CMRR (dB) -30 -50 -60 -70 -40 -50 -60 -70 -100 -80 100K 1M 10M VS- -30 -90 10K VSVS+ -90 1K 100M 500M 10K FREQUENCY (Hz) 100M 500M 0 90 AV=+2 VS=±5V VS=±5V 80 10 MAGNITUDE (dB) OUTPUT IMPEDANCE (Ω) 10M 1M FIGURE 14. PSRR vs FREQUENCY 100 1 0.1 72 60 108 50 144 40 180 30 216 20 252 10 0.01 0 100K 1M 10M 100M 500 1K 10K 100K 10M 1M 100M 500M FREQUENCY (Hz) FIGURE 15. OUTPUT IMPEDANCE vs FREQUENCY FIGURE 16. OPEN LOOP GAIN AND PHASE vs FREQUENCY AV=+10 VS=±5V VS=±5V INPUT OUTPUT CH1 100 CH2 10 1 10 36 70 FREQUENCY (Hz) NOISE VOLTAGE (nV/√Hz) 100K FREQUENCY (Hz) FIGURE 13. CMRR vs FREQUENCY 10K VS+ -20 -80 -110 1K AV=+10 VS=±5V 0 PHASE (°) -20 ∆=2.12V CH1=500mV CH2=500mV 100 1K 10K 100K TIME (10ns/DIV) FREQUENCY (Hz) FIGURE 17. EQUIVALENT INPUT VOLTAGE NOISE vs FREQUENCY 5 FIGURE 18. LARGE SIGNAL RISE TIME EL5130, EL5131 Typical Performance Curves (Continued) AV=+10 VS=±5V INPUT CH1 AV=+10 VS=±5V INPUT CH1 OUTPUT CH2 OUTPUT ∆=2.12V CH1=500mV CH2=500mV CH2 ∆=1.16V CH1=200mV CH2=500mV TIME (10ns/DIV) TIME (10ns/DIV) FIGURE 19. LARGE SIGNAL FALL TIME AV=+10 VS=±5V FIGURE 20. SMALL SIGNAL RISE TIME AV=+10 VS=±5V INPUT CH1 CH1 OUTPUT CH2 CH2 ∆=1.16V CH1=200mV CH2=500mV CH1=1V CH2=200mV 200ns/DIV TIME (10ns/DIV) FIGURE 21. SMALL SIGNAL FALL TIME FIGURE 22. TURN OFF TIME AV=+10 VS=±5V CH1 CH2 CH1=1V CH2=200mV 200ns/DIV POWER DISSIPATION (W) 1.8 JEDEC JESD51-7 HIGH EFFECTIVE THERMAL CONDUCTIVITY TEST BOARD 1.6 1.4 1.2 1.136W SO8 θJA=110°C/W 1 0.8 0.6 543mW 0.4 SOT23-5 θJA=230°C/W 0.2 0 0 25 50 75 85 100 125 150 AMBIENT TEMPERATURE (°C) FIGURE 23. TURN ON TIME 6 FIGURE 24. PACKAGE POWER DISSIPATION vs AMBIENT TEMPERATURE EL5130, EL5131 Typical Performance Curves (Continued) POWER DISSIPATION (W) 1.2 JEDEC JESD51-3 LOW EFFECTIVE THERMAL CONDUCTIVITY TEST BOARD 1 781mW 0.8 SO8 θJA=160°C/W 0.6 0.4 488mW SOT23-5 θJA=256°C/W 0.2 0 0 25 50 75 85 100 125 150 AMBIENT TEMPERATURE (°C) DIFFERENTIAL GAIN (%) FIGURE 25. PACKAGE POWER DISSIPATION vs AMBIENT TEMPERATURE 0.03 0.02 0.01 0.00 -0.01 -0.02 -0.03 0 10 20 30 40 50 60 70 80 90 100 DIFFERENTIAL PHASE (°) FIGURE 26. DIFFERENTIAL GAIN (%) 0.4 0.3 0.2 0.1 0.0 -0.1 -0.2 -0.3 0 10 20 30 40 50 60 70 80 90 100 FIGURE 27. DIFFERENTIAL PHASE (°) All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com 7