DC/DC Converters CTDD2007S-D Series Fixed Input Isolated & Unregulated 2W Output, Dual Output Not shown at actual size. ctparts.com SPECIFICATIONS Vout Iout Max. (mA) Iout Min. (mA) Effi(Typ.) 5VDC 9VDC 12VDC 15VDC ±200 ±111 ±83 ±67 ±20 ±12 ±9 ±7 78% 79% 79% 80% 10.8-13.2VDC 10.8-13.2VDC 10.8-13.2VDC 10.8-13.2VDC 5VDC 9VDC 12VDC 15VDC ±200 ±111 ±83 ±67 ±20 ±12 ±9 ±7 79% 79% 80% 82% 21.6-26.4VDC 21.6-26.4VDC 21.6-26.4VDC 21.6-26.4VDC 5VDC 9VDC 12VDC 15VDC ±200 ±111 ±83 ±67 ±20 ±12 ±9 ±7 82% 80% 81% 82% MAX Units Part Number Vin Nom. CTDD2007S-0505D-2 CTDD2007S-0509D-2 CTDD2007S-0512D-2 CTDD2007S-0515D-2 5VDC 5VDC 5VDC 5VDC 4.5-5.5VDC 4.5-5.5VDC 4.5-5.5VDC 4.5-5.5VDC CTDD2007S-1205D-2 CTDD2007S-1209D-2 CTDD2007S-1212D-2 CTDD2007S-1215D-2 12VDC 12VDC 12VDC 12VDC CTDD2007S-2405D-2 CTDD2007S-2409D-2 CTDD2007S-2412D-2 CTDD2007S-2415D-2 24VDC 24VDC 24VDC 24VDC Input Range ISOLATION SPECIFICATIONS Item Test Condition MIN Isolation Voltage Tested for 1 minute 1000 TYP VDC Isolation Resistance Test at 500VDC 1000 MΩ OUTPUT SPECIFICATIONS Item Test Condition MIN 2W Output Power FEATURES Efficiency: To 82% Temperature Range: -40°C to 85°C Isolation: 1KVDC Power Density: 1.42W/cm3 Package: UL94-V0 Miscellaneous: No heatsink required. No external component required. Industry standard pinout. Positive & Negative Voltage Output. Full 2W output power. Custom service available. Samples available. TYP 0.2 Line regulation For Vin change of 1% Load regulation 10% to 100% full load Output voltage accuracy See tolerance envelope graph Temperature drift 100% full load 2W Output ripple 20MHz Bandwidth Switching frequency Full load, nominal input 10 60 MAX Units 2 W 1.2 % 15 % 0.03 %/°C 100 150 mVp-p 75 100 KHz Note: 1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. TYPICAL CHARACTERISTICS CHARACTERISTICS Temperature Derating Graph Output Voltage(%) +10% +5% Nominal Voltage Typic a l Load Line +2.5% -2.5% -7.5% 10% 50% 100% Output Current(%) CENTRAL Technologies 02.10.05 Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2005 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice Output Power(%) Tolerance Envelope Graph Short Circuit Protection: 1 second Temperature Rise at Full Load: 25°C Max. 15°C Typ. Cooling: Free air convection Operating Temperature Range: -40°C to +85°C Storage Temperature Range: -55°C to +125°C Lead Temperature: 300°C (1.5mm from case for 10 seconds) Storage Humidity Range: < 95% Case Material: Plastic (UL94-V0) MTBF: >1,000,000 hours 120 100 80 60 Safe Operating Area 40 20 0 -40 0 40 80 120 Ambient Temperature(°C) DC/DC Converters ctparts.com CTDD2007S-D Series Fixed Input Isolated & Unregulated 2W Output, Dual Output OUTLINE DIMENSIONS & RECOMMENDED FOOTPRINT DETAILS CTDD2007S-D Package 19.50 9.65 Side View 4.10 1.25 1 2 7.05 4 5 6 Bottom View 12.70 2.00 CTDD2007S-D Footprint 2.54 ø1.00+0.15/-0 1 2 4 5 6 2.54 Note: All pins on a 2.54mm pitch; all pin diameters are 0.50mm; all dimensions in mm. PIN CONNECTIONS Pin 1 2 4 5 6 Function Vin GND -Vo 0V +Vo 1 2 4 5 6 CENTRAL Technologies 12.08.04 Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2004 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice